/* * This config file is for Packard Bell Vibe 500 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 67 #define MODEL_NAME "Packard Bell Vibe 500" #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can ivert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 160 #define LCD_HEIGHT 128 /* sqrt(160^2 + 128^2) / 1.8 = 113.8 */ #define LCD_DPI 114 #define LCD_DEPTH 16 /* 65536 colors */ #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 */ #ifndef BOOTLOADER /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING #endif #define CONFIG_KEYPAD PBELL_VIBE500_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if you have a real-time clock */ /* Philips 8563T - E8564 is a clone of it */ #define CONFIG_RTC RTC_E8564 #define HAVE_RTC_ALARM /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define the type of audio codec */ #define HAVE_WM8731 /* WM8731 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS #define AB_REPEAT_ENABLE #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 16 #define DEFAULT_BRIGHTNESS_SETTING 10 /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT #define HAVE_BUTTONLIGHT_BRIGHTNESS /* for compatibility */ #define BATTERY_CAPACITY_DEFAULT 1000 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1500 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging, software can monitor plug and charge state */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5020 /* Define this if you want to use the PP5022 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x80000 /* Define this to the CPU frequency */ #define CPU_FREQ 75000000 #define CONFIG_LCD LCD_VIBE500 /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST #define MIN_CONTRAST_SETTING 0 #define MAX_CONTRAST_SETTING 16 #define DEFAULT_CONTRAST_SETTING 10 /* OF */ /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x0409 #define USB_PRODUCT_ID 0x8038 #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* define this if the device has larger sectors when accessed via USB */ /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */ /* #define MAX_LOG_SECTOR_SIZE 2048 */ /* define this if the hard drive uses large physical sectors (ATA-7 feature) */ /* and doesn't handle them in the drive firmware */ /* #define MAX_PHYS_SECTOR_SIZE 1024 */ #define MI4_FORMAT #define BOOTFILE_EXT "mi4" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #ifndef BOOTLOADER #define HAVE_ATA_DMA #endif /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY