/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Rockbox driver for Sansa e200 LCDs * * Based on reverse engineering done my MrH * * Copyright (c) 2006 Daniel Ankers * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "lcd.h" #include "system.h" #include #include "backlight-target.h" #include "cpu.h" /* Power and display status */ static bool power_on = false; /* Is the power turned on? */ static bool display_on SHAREDBSS_ATTR = false; /* Is the display turned on? */ static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0; /* Reverse Flag */ #define R_DISP_CONTROL_NORMAL 0x0004 #define R_DISP_CONTROL_REV 0x0000 static unsigned short r_disp_control_rev = R_DISP_CONTROL_NORMAL; /* Flipping */ #define R_DRV_OUTPUT_CONTROL_NORMAL 0x101b #define R_DRV_OUTPUT_CONTROL_FLIPPED 0x131b static unsigned short r_drv_output_control = R_DRV_OUTPUT_CONTROL_NORMAL; #define LCD_DATA_IN_GPIO GPIOB_INPUT_VAL #define LCD_DATA_IN_PIN 6 #define LCD_DATA_OUT_GPIO GPIOB_OUTPUT_VAL #define LCD_DATA_OUT_PIN 7 #define LCD_CLOCK_GPIO GPIOB_OUTPUT_VAL #define LCD_CLOCK_PIN 5 #define LCD_CS_GPIO GPIOD_OUTPUT_VAL #define LCD_CS_PIN 6 #define LCD_REG_0 (*(volatile unsigned long *)(0xc2000000)) #define LCD_REG_1 (*(volatile unsigned long *)(0xc2000004)) #define LCD_REG_2 (*(volatile unsigned long *)(0xc2000008)) #define LCD_REG_3 (*(volatile unsigned long *)(0xc200000c)) #define LCD_REG_4 (*(volatile unsigned long *)(0xc2000010)) #define LCD_REG_5 (*(volatile unsigned long *)(0xc2000014)) #define LCD_REG_6 (*(volatile unsigned long *)(0xc2000018)) #define LCD_REG_7 (*(volatile unsigned long *)(0xc200001c)) #define LCD_REG_8 (*(volatile unsigned long *)(0xc2000020)) #define LCD_REG_9 (*(volatile unsigned long *)(0xc2000024)) #define LCD_FB_BASE_REG (*(volatile unsigned long *)(0xc2000028)) /* Taken from HD66789 datasheet and seems similar enough. Definitely a Renesas chip though with a perfect register index match but at least one bit seems to be set that that datasheet doesn't show. It says T.B.D. on the regmap anyway. */ #define R_START_OSC 0x00 #define R_DRV_OUTPUT_CONTROL 0x01 #define R_DRV_WAVEFORM_CONTROL 0x02 #define R_ENTRY_MODE 0x03 #define R_COMPARE_REG1 0x04 #define R_COMPARE_REG2 0x05 #define R_DISP_CONTROL1 0x07 #define R_DISP_CONTROL2 0x08 #define R_DISP_CONTROL3 0x09 #define R_FRAME_CYCLE_CONTROL 0x0b #define R_EXT_DISP_INTF_CONTROL 0x0c #define R_POWER_CONTROL1 0x10 #define R_POWER_CONTROL2 0x11 #define R_POWER_CONTROL3 0x12 #define R_POWER_CONTROL4 0x13 #define R_RAM_ADDR_SET 0x21 #define R_RAM_READ_DATA 0x21 #define R_RAM_WRITE_DATA 0x22 #define R_RAM_WRITE_DATA_MASK1 0x23 #define R_RAM_WRITE_DATA_MASK2 0x24 #define R_GAMMA_FINE_ADJ_POS1 0x30 #define R_GAMMA_FINE_ADJ_POS2 0x31 #define R_GAMMA_FINE_ADJ_POS3 0x32 #define R_GAMMA_GRAD_ADJ_POS 0x33 #define R_GAMMA_FINE_ADJ_NEG1 0x34 #define R_GAMMA_FINE_ADJ_NEG2 0x35 #define R_GAMMA_FINE_ADJ_NEG3 0x36 #define R_GAMMA_GRAD_ADJ_NEG 0x37 #define R_GAMMA_AMP_ADJ_POS 0x38 #define R_GAMMA_AMP_ADJ_NEG 0x39 #define R_GATE_SCAN_START_POS 0x40 #define R_VERT_SCROLL_CONTROL 0x41 #define R_1ST_SCR_DRIVE_POS 0x42 #define R_2ND_SCR_DRIVE_POS 0x43 #define R_HORIZ_RAM_ADDR_POS 0x44 #define R_VERT_RAM_ADDR_POS 0x45 /* We don't know how to receive a DMA finished signal from the LCD controller. * To avoid problems with flickering, we double-buffer the framebuffer. * Align as in lcd-16bit.c and not cached. */ static fb_data lcd_driver_framebuffer[LCD_FBHEIGHT][LCD_FBWIDTH] __attribute__((aligned(16))) NOCACHEBSS_ATTR; #ifdef BOOTLOADER static void lcd_init_gpio(void) { GPIOB_ENABLE |= (1<<7); GPIOB_ENABLE |= (1<<5); GPIOB_OUTPUT_EN |= (1<<7); GPIOB_OUTPUT_EN |= (1<<5); GPIOD_ENABLE |= (1<<6); GPIOD_OUTPUT_EN |= (1<<6); } #endif static void lcd_bus_idle(void) { LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN); LCD_DATA_OUT_GPIO |= (1 << LCD_DATA_OUT_PIN); } static void lcd_send_byte(unsigned char byte) { int i; for (i = 7; i >=0 ; i--) { LCD_CLOCK_GPIO &= ~(1 << LCD_CLOCK_PIN); if ((byte >> i) & 1) { LCD_DATA_OUT_GPIO |= (1 << LCD_DATA_OUT_PIN); } else { LCD_DATA_OUT_GPIO &= ~(1 << LCD_DATA_OUT_PIN); } udelay(1); LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN); udelay(1); lcd_bus_idle(); udelay(3); } } static void lcd_send_msg(unsigned char cmd, unsigned int data) { lcd_bus_idle(); udelay(1); LCD_CS_GPIO &= ~(1 << LCD_CS_PIN); udelay(10); lcd_send_byte(cmd); lcd_send_byte((unsigned char)(data >> 8)); lcd_send_byte((unsigned char)(data & 0xff)); LCD_CS_GPIO |= (1 << LCD_CS_PIN); udelay(1); lcd_bus_idle(); } static void lcd_write_reg(unsigned int reg, unsigned int data) { lcd_send_msg(0x70, reg); lcd_send_msg(0x72, data); } /* Run the powerup sequence for the driver IC */ static void lcd_power_on(void) { /* Clear standby bit */ lcd_write_reg(R_POWER_CONTROL1, 0x0000); /** Power ON Sequence **/ lcd_write_reg(R_START_OSC, 0x0001); /* 10ms or more for oscillation circuit to stabilize */ sleep(HZ/50); /* SAP2-0=100, BT2-0=100, AP2-0=100, DK=1, SLP=0, STB=0 */ lcd_write_reg(R_POWER_CONTROL1, 0x4444); /* DC12-10=000, DC2-0=000, VC2-0=001 */ lcd_write_reg(R_POWER_CONTROL2, 0x0001); /* PON=0, VRH3-0=0011 */ lcd_write_reg(R_POWER_CONTROL3, 0x0003); /* VCOMG=0, VDV4-0=10001, VCM3-0=11001 */ lcd_write_reg(R_POWER_CONTROL4, 0x1119); /* PON=1, VRH3-0=0011 */ lcd_write_reg(R_POWER_CONTROL3, 0x0013); sleep(HZ/25); /* SAP2-0=100, BT2-0=100, AP2-0=100, DK=0, SLP=0, STB=0 */ lcd_write_reg(R_POWER_CONTROL1, 0x4440); /* VCOMG=1, VDV4-0=10001, VCM3-0=11001 */ lcd_write_reg(R_POWER_CONTROL4, 0x3119); sleep(HZ/6); /* VSPL=0, HSPL=0, DPL=1, EPL=0, SM=0, GS=x, SS=x, NL4-0=11011 */ lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control); /* FLD=0, FLD0=1, B/C=1, EOR=1, NW5-0=000000 */ lcd_write_reg(R_DRV_WAVEFORM_CONTROL, 0x0700); /* TRI=0, DFM1-0=11, BGR=0, HWM=1, ID1-0=10, AM=0, LG2-0=000 * AM: horizontal update direction * ID1-0: H decrement, V increment */ lcd_write_reg(R_ENTRY_MODE, 0x6020); lcd_write_reg(R_COMPARE_REG1, 0x0000); lcd_write_reg(R_COMPARE_REG2, 0x0000); /* FP3-0=0010, BP3-0=0010 */ lcd_write_reg(R_DISP_CONTROL2, 0x0202); /* PTG1-0=00 (normal scan), ISC3-0=0000 (ignored) */ lcd_write_reg(R_DISP_CONTROL3, 0x0000); /* NO2-0=01, SDT1-0=00, EQ1-0=01, DIV1-0=00, RTN3-0=0000 */ lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x4400); /* RM=1, DM1-0=01, RIM1-0=00 */ lcd_write_reg(R_EXT_DISP_INTF_CONTROL, 0x0110); /* SCN4-0=00000 - G1 if GS=0, G240 if GS=1 */ lcd_write_reg(R_GATE_SCAN_START_POS, 0x0000); /* VL7-0=00000000 (0 lines) */ lcd_write_reg(R_VERT_SCROLL_CONTROL, 0x0000); /* SE17-10=219, SS17-10=0 - 220 gates */ lcd_write_reg(R_1ST_SCR_DRIVE_POS, (219 << 8)); /* SE27-10=0, SS27-10=0 - no second screen */ lcd_write_reg(R_2ND_SCR_DRIVE_POS, 0x0000); /* HEA=175, HSA=0 = H window from 0-175 */ lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (175 << 8)); /* VEA=219, VSA=0 = V window from 0-219 */ lcd_write_reg(R_VERT_RAM_ADDR_POS, (219 << 8)); /* PKP12-10=000, PKP02-00=000 */ lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0000); /* PKP32-30=111, PKP22-20=100 */ lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0704); /* PKP52-50=001, PKP42-40=111 */ lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0107); /* PRP12-10=111, PRP02-00=100 */ lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0704); /* PKN12-10=001, PKN02-00=111 */ lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0107); /* PKN32-30=000, PKN22-20=010 */ lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0002); /* PKN52-50=111, PKN42-40=111 */ lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0707); /* PRN12-10=101, PRN02-00=011 */ lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0503); /* VRP14-10=00000, VRP03-00=0000 */ lcd_write_reg(R_GAMMA_AMP_ADJ_POS, 0x0000); /* WRN14-10=00000, VRN03-00=0000 */ lcd_write_reg(R_GAMMA_AMP_ADJ_NEG, 0x0000); /* AD15-0=175 (upper right corner) */ lcd_write_reg(R_RAM_ADDR_SET, 175); /* RM=1, DM1-0=01, RIM1-0=00 */ lcd_write_reg(R_EXT_DISP_INTF_CONTROL, 0x0110); power_on = true; } /* Run the display on sequence for the driver IC */ static void lcd_display_on(void) { if (!power_on) { /* Power has been turned off so full reinit is needed */ lcd_power_on(); } else { /* Restore what we fiddled with when turning display off */ /* PON=1, VRH3-0=0011 */ lcd_write_reg(R_POWER_CONTROL3, 0x0013); /* NO2-0=01, SDT1-0=00, EQ1-0=01, DIV1-0=00, RTN3-0=0000 */ lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x4400); /* VCOMG=1, VDV4-0=10001, VCM3-0=11001 */ lcd_write_reg(R_POWER_CONTROL4, 0x3119); } /* SAP2-0=100, BT2-0=111, AP2-0=100, DK=1, SLP=0, STB=0 */ lcd_write_reg(R_POWER_CONTROL1, 0x4740); sleep(HZ/25); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=0, DTE=0, CL=0, REV=x, D1-0=01 */ lcd_write_reg(R_DISP_CONTROL1, 0x0041 | r_disp_control_rev); sleep(HZ/30); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, DTE=0, CL=0, REV=x, D1-0=01 */ lcd_write_reg(R_DISP_CONTROL1, 0x0061 | r_disp_control_rev); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, DTE=0, CL=0, REV=x, D1-0=11 */ lcd_write_reg(R_DISP_CONTROL1, 0x0063 | r_disp_control_rev); sleep(HZ/30); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, DTE=1, CL=0, REV=x, D1-0=11 */ lcd_write_reg(R_DISP_CONTROL1, 0x0073 | r_disp_control_rev); /* Go into write data mode */ lcd_send_msg(0x70, R_RAM_WRITE_DATA); /* tell that we're on now */ display_on = true; } /* Turn off visible display operations */ static void lcd_display_off(void) { /* block drawing operations and changing of first */ display_on = false; /* NO2-0=01, SDT1-0=00, EQ1-0=00, DIV1-0=00, RTN3-0=0000 */ lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x4000); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, DTE=1, CL=0, REV=x, D1-0=10 */ lcd_write_reg(R_DISP_CONTROL1, 0x0072 | r_disp_control_rev); sleep(HZ/25); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, DTE=0, CL=0, REV=x, D1-0=10 */ lcd_write_reg(R_DISP_CONTROL1, 0x0062 | r_disp_control_rev); sleep(HZ/25); /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=0, GON=0, DTE=0, CL=0, REV=0, D1-0=00 */ lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* SAP2-0=000, BT2-0=000, AP2-0=000, DK=0, SLP=0, STBY=0 */ lcd_write_reg(R_POWER_CONTROL1, 0x0000); /* PON=0, VRH3-0=0011 */ lcd_write_reg(R_POWER_CONTROL3, 0x0003); /* VCOMG=0, VDV4-0=10001, VCM4-0=11001 */ lcd_write_reg(R_POWER_CONTROL4, 0x1119); } void lcd_init_device(void) { /* All this is magic worked out by MrH */ /* Stop any DMA which is in progress */ LCD_REG_6 &= ~1; udelay(100000); #ifdef BOOTLOADER /* Bother at all to do this again? */ /* Init GPIO ports */ lcd_init_gpio(); /* Controller init */ GPO32_ENABLE |= (1 << 28); GPO32_VAL &= ~(1 << 28); DEV_INIT1 = ( (DEV_INIT1 & 0x03ffffff) | (0x15 << 26) ); outl(((inl(0x70000014) & (0x0fffffff)) | (0x5 << 28)), 0x70000014); outl((inl(0x70000020) & ~(0x3 << 10)), 0x70000020); DEV_EN |= DEV_LCD; /* Enable controller */ outl(0x6, 0x600060d0); DEV_RS |= DEV_LCD; /* Reset controller */ outl((inl(0x70000020) & ~(1 << 14)), 0x70000020); lcd_bus_idle(); DEV_RS &=~DEV_LCD; /* Clear reset */ udelay(1000); LCD_REG_0 = (LCD_REG_0 & (0x00ffffff)) | (0x22 << 24); LCD_REG_0 = (LCD_REG_0 & (0xff00ffff)) | (0x14 << 16); LCD_REG_0 = (LCD_REG_0 & (0xffffc0ff)) | (0x3 << 8); LCD_REG_0 = (LCD_REG_0 & (0xffffffc0)) | (0xa); LCD_REG_1 &= 0x00ffffff; LCD_REG_1 &= 0xff00ffff; LCD_REG_1 = (LCD_REG_1 & 0xffff03ff) | (0x2 << 10); LCD_REG_1 = (LCD_REG_1 & 0xfffffc00) | (0xdd); LCD_REG_2 |= (1 << 5); LCD_REG_2 |= (1 << 6); LCD_REG_2 = (LCD_REG_2 & 0xfffffcff) | (0x2 << 8); LCD_REG_7 &= (0xf800ffff); LCD_REG_7 &= (0xfffff800); LCD_REG_8 = (LCD_REG_8 & (0xf800ffff)) | (0xb0 << 16); LCD_REG_8 = (LCD_REG_8 & (0xfffff800)) | (0xdc); /* X-Y Geometry? */ LCD_REG_5 |= 0xc; LCD_REG_5 = (LCD_REG_5 & ~(0x70)) | (0x3 << 4); LCD_REG_5 |= 2; LCD_REG_6 &= ~(1 << 15); LCD_REG_6 |= (0xe00); LCD_REG_6 = (LCD_REG_6 & (0xffffff1f)) | (0x4 << 5); LCD_REG_6 |= (1 << 4); LCD_REG_5 &= ~(1 << 7); /* lcd_driver_framebuffer is uncached therefore at the physical address */ LCD_FB_BASE_REG = (long)lcd_driver_framebuffer; udelay(100000); /* LCD init */ /* Pull RESET low, then high to reset driver IC */ GPO32_VAL &= ~(1 << 28); udelay(10000); GPO32_VAL |= (1 << 28); udelay(10000); lcd_display_on(); #else /* Power and display already ON - switch framebuffer address and reset settings */ /* lcd_driver_framebuffer is uncached therefore at the physical address */ LCD_FB_BASE_REG = (long)lcd_driver_framebuffer; power_on = true; display_on = true; lcd_set_invert_display(false); lcd_set_flip(false); #endif LCD_REG_6 |= 1; /* Start DMA */ } void lcd_enable(bool on) { if (on == display_on) return; if (on) { DEV_EN |= DEV_LCD; /* Enable LCD controller */ lcd_display_on(); /* Turn on display */ lcd_update(); /* Resync display */ lcd_call_enable_hook(); LCD_REG_6 |= 1; /* Restart DMA */ sleep(HZ/50); /* Wait for a frame to be written */ } else { LCD_REG_6 &= ~1; /* Disable DMA */ sleep(HZ/50); /* Wait for dma end (assuming 50Hz) */ lcd_display_off(); /* Turn off display */ DEV_EN &= ~DEV_LCD; /* Disable LCD controller */ } } bool lcd_enabled(void) { return display_on; } void lcd_sleep(void) { LCD_REG_6 &= ~1; sleep(HZ/50); if (power_on) { /* Turn off display */ if (display_on) lcd_display_off(); power_on = false; } /* Set standby mode */ /* SAP2-0=000, BT2-0=000, AP2-0=000, DK=0, SLP=0, STB=1 */ lcd_write_reg(R_POWER_CONTROL1, 0x0001); } /* Copies a rectangle from one framebuffer to another. Can be used in single transfer mode with width = num pixels, and height = 1 which allows a full-width rectangle to be copied more efficiently. */ extern void lcd_copy_buffer_rect(fb_data *dst, const fb_data *src, int width, int height); void lcd_update_rect(int x, int y, int width, int height) { fb_data *dst, *src; if (!display_on) return; if (x + width > LCD_WIDTH) width = LCD_WIDTH - x; /* Clip right */ if (x < 0) width += x, x = 0; /* Clip left */ if (width <= 0) return; /* nothing left to do */ if (y + height > LCD_HEIGHT) height = LCD_HEIGHT - y; /* Clip bottom */ if (y < 0) height += y, y = 0; /* Clip top */ if (height <= 0) return; /* nothing left to do */ dst = &lcd_driver_framebuffer[y][x]; src = &lcd_framebuffer[y][x]; /* Copy part of the Rockbox framebuffer to the second framebuffer */ if (width < LCD_WIDTH) { /* Not full width - do line-by-line */ lcd_copy_buffer_rect(dst, src, width, height); } else { /* Full width - copy as one line */ lcd_copy_buffer_rect(dst, src, LCD_WIDTH*height, 1); } } void lcd_update(void) { if (!display_on) return; /* Copy the Rockbox framebuffer to the second framebuffer */ lcd_copy_buffer_rect(&lcd_driver_framebuffer[0][0], &lcd_framebuffer[0][0], LCD_WIDTH*LCD_HEIGHT, 1); } /*** hardware configuration ***/ void lcd_set_contrast(int val) { /* TODO: Implement lcd_set_contrast() */ (void)val; } void lcd_set_invert_display(bool yesno) { bool dma_on = LCD_REG_6 & 1; if (dma_on) { LCD_REG_6 &= ~1; /* Disable DMA */ sleep(HZ/50); /* Wait for dma end (assuming 50Hz) */ DEV_EN &= ~DEV_LCD; /* Disable LCD controller */ } r_disp_control_rev = yesno ? R_DISP_CONTROL_REV : R_DISP_CONTROL_NORMAL; if (display_on) { /* PT1-0=00, VLE2-1=00, SPT=0, IB6(??)=1, GON=1, CL=0, DTE=1, REV=x, D1-0=11 */ lcd_write_reg(R_DISP_CONTROL1, 0x0073 | r_disp_control_rev); } if (dma_on) { DEV_EN |= DEV_LCD; /* Enable LCD controller */ lcd_send_msg(0x70, R_RAM_WRITE_DATA); /* Set to RAM write mode */ LCD_REG_6 |= 1; /* Restart DMA */ } } /* turn the display upside down (call lcd_update() afterwards) */ void lcd_set_flip(bool yesno) { bool dma_on = LCD_REG_6 & 1; if (dma_on) { LCD_REG_6 &= ~1; /* Disable DMA */ sleep(HZ/50); /* Wait for dma end (assuming 50Hz) */ DEV_EN &= ~DEV_LCD; /* Disable LCD controller */ } r_drv_output_control = yesno ? R_DRV_OUTPUT_CONTROL_FLIPPED : R_DRV_OUTPUT_CONTROL_NORMAL; if (power_on) { /* VSPL=0, HSPL=0, DPL=1, EPL=0, SM=0, GS=x, SS=x, NL4-0=11011 (G1-G224) */ lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control); } if (dma_on) { DEV_EN |= DEV_LCD; /* Enable LCD controller */ lcd_send_msg(0x70, R_RAM_WRITE_DATA); /* Set to RAM write mode */ LCD_REG_6 |= 1; /* Restart DMA */ } } /* Blitting functions */ void lcd_yuv_set_options(unsigned options) { lcd_yuv_options = options; } /* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */ extern void lcd_write_yuv420_lines(fb_data *dst, unsigned char const * const src[3], int width, int stride); extern void lcd_write_yuv420_lines_odither(fb_data *dst, unsigned char const * const src[3], int width, int stride, int x_screen, /* To align dither pattern */ int y_screen); /* Performance function to blit a YUV bitmap directly to the LCD */ /* For the e200 - show it rotated */ /* So the LCD_WIDTH is now the height */ void lcd_blit_yuv(unsigned char * const src[3], int src_x, int src_y, int stride, int x, int y, int width, int height) { unsigned char const * yuv_src[3]; off_t z; if (!display_on) return; /* Sorry, but width and height must be >= 2 or else */ width &= ~1; height >>= 1; y = LCD_WIDTH - 1 - y; fb_data *dst = &lcd_driver_framebuffer[x][y]; z = stride*src_y; yuv_src[0] = src[0] + z + src_x; yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1); yuv_src[2] = src[2] + (yuv_src[1] - src[1]); if (lcd_yuv_options & LCD_YUV_DITHER) { do { lcd_write_yuv420_lines_odither(dst, yuv_src, width, stride, y, x); yuv_src[0] += stride << 1; /* Skip down two luma lines */ yuv_src[1] += stride >> 1; /* Skip down one chroma line */ yuv_src[2] += stride >> 1; dst -= 2; y -= 2; } while (--height > 0); } else { do { lcd_write_yuv420_lines(dst, yuv_src, width, stride); yuv_src[0] += stride << 1; /* Skip down two luma lines */ yuv_src[1] += stride >> 1; /* Skip down one chroma line */ yuv_src[2] += stride >> 1; dst -= 2; } while (--height > 0); } }