/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Rob Purchase * Copyright © 2008 Rafaël Carré * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "kernel.h" #include "system.h" #include "panic.h" #include "ascodec-target.h" #include "dma-target.h" #include "clock-target.h" #define default_interrupt(name) \ extern __attribute__((weak,alias("UIRQ"))) void name (void) void irq_handler(void) __attribute__((interrupt ("IRQ"), naked)); void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked)); default_interrupt(INT_WATCHDOG); default_interrupt(INT_TIMER1); default_interrupt(INT_TIMER2); default_interrupt(INT_USB); default_interrupt(INT_DMAC); default_interrupt(INT_NAND); default_interrupt(INT_IDE); default_interrupt(INT_MCI0); default_interrupt(INT_MCI1); default_interrupt(INT_AUDIO); default_interrupt(INT_SSP); default_interrupt(INT_I2C_MS); default_interrupt(INT_I2C_AUDIO); default_interrupt(INT_I2SIN); default_interrupt(INT_I2SOUT); default_interrupt(INT_UART); default_interrupt(INT_GPIOD); default_interrupt(RESERVED1); /* Interrupt 17 : unused */ default_interrupt(INT_CGU); default_interrupt(INT_MEMORY_STICK); default_interrupt(INT_DBOP); default_interrupt(RESERVED2); /* Interrupt 21 : unused */ default_interrupt(RESERVED3); /* Interrupt 22 : unused */ default_interrupt(RESERVED4); /* Interrupt 23 : unused */ default_interrupt(RESERVED5); /* Interrupt 24 : unused */ default_interrupt(RESERVED6); /* Interrupt 25 : unused */ default_interrupt(RESERVED7); /* Interrupt 26 : unused */ default_interrupt(RESERVED8); /* Interrupt 27 : unused */ default_interrupt(RESERVED9); /* Interrupt 28 : unused */ default_interrupt(INT_GPIOA); default_interrupt(INT_GPIOB); default_interrupt(INT_GPIOC); static const char * const irqname[] = { "INT_WATCHDOG", "INT_TIMER1", "INT_TIMER2", "INT_USB", "INT_DMAC", "INT_NAND", "INT_IDE", "INT_MCI0", "INT_MCI1", "INT_AUDIO", "INT_SSP", "INT_I2C_MS", "INT_I2C_AUDIO", "INT_I2SIN", "INT_I2SOUT", "INT_UART", "INT_GPIOD", "RESERVED1", "INT_CGU", "INT_MEMORY_STICK", "INT_DBOP", "RESERVED2", "RESERVED3", "RESERVED4", "RESERVED5", "RESERVED6", "RESERVED7", "RESERVED8", "RESERVED9", "INT_GPIOA", "INT_GPIOB", "INT_GPIOC" }; static void UIRQ(void) { unsigned int irq_no = 0; int status = VIC_IRQ_STATUS; while((status >>= 1)) irq_no++; panicf("Unhandled IRQ %02X: %s", irq_no, irqname[irq_no]); } struct vec_int_src { int source; void (*isr) (void); }; /* Vectored interrupts (16 available) */ struct vec_int_src vec_int_srcs[] = { { INT_SRC_TIMER1, INT_TIMER1 }, { INT_SRC_TIMER2, INT_TIMER2 }, { INT_SRC_DMAC, INT_DMAC }, { INT_SRC_NAND, INT_NAND }, { INT_SRC_MCI0, INT_MCI0 }, { INT_SRC_GPIOA, INT_GPIOA, }, { INT_SRC_GPIOB, INT_GPIOB, }, }; static void setup_vic(void) { volatile unsigned long *vic_vect_addrs = VIC_VECT_ADDRS; volatile unsigned long *vic_vect_cntls = VIC_VECT_CNTLS; const unsigned int n = sizeof(vec_int_srcs)/sizeof(vec_int_srcs[0]); unsigned int i; CGU_PERI |= CGU_VIC_CLOCK_ENABLE; /* enable VIC */ VIC_INT_EN_CLEAR = 0xffffffff; /* disable all interrupt lines */ VIC_INT_SELECT = 0; /* only IRQ, no FIQ */ VIC_DEF_VECT_ADDR = (unsigned long)UIRQ; for(i = 0; i < n; i++) { vic_vect_addrs[i] = (unsigned long)vec_int_srcs[i].isr; vic_vect_cntls[i] = (1<<5) | vec_int_srcs[i].source; } } void irq_handler(void) { asm volatile( "stmfd sp!, {r0-r5,ip,lr} \n" /* Store context */ "ldr r5, =0xC6010030 \n" /* VIC_VECT_ADDR */ "mov lr, pc \n" /* Return from ISR */ "ldr pc, [r5] \n" /* execute ISR */ "str r0, [r5] \n" /* Ack interrupt */ "ldmfd sp!, {r0-r5,ip,lr} \n" /* Restore context */ "subs pc, lr, #4 \n" /* Return from IRQ */ ); } void fiq_handler(void) { asm volatile ( "subs pc, lr, #4 \r\n" ); } #ifdef BOOTLOADER static void sdram_delay(void) { int delay = 1024; /* arbitrary */ while (delay--) ; } /* Use the same initialization than OF */ static void sdram_init(void) { CGU_PERI |= (1<<26)|(1<<27); /* extmem & extmem intf clocks */ MPMC_CONTROL = 0x1; /* enable MPMC */ MPMC_DYNAMIC_CONTROL = 0x183; /* SDRAM NOP, all clocks high */ sdram_delay(); MPMC_DYNAMIC_CONTROL = 0x103; /* SDRAM PALL, all clocks high */ sdram_delay(); MPMC_DYNAMIC_REFRESH = 0x138; /* 0x138 * 16 HCLK ticks between SDRAM refresh cycles */ MPMC_CONFIG = 0; /* little endian, HCLK:MPMCCLKOUT[3:0] ratio = 1:1 */ if(MPMC_PERIPH_ID2 & 0xf0) MPMC_DYNAMIC_READ_CONFIG = 0x1; /* command delayed, clock out not delayed */ /* timings */ MPMC_DYNAMIC_tRP = 2; MPMC_DYNAMIC_tRAS = 4; MPMC_DYNAMIC_tSREX = 5; MPMC_DYNAMIC_tAPR = 0; MPMC_DYNAMIC_tDAL = 4; MPMC_DYNAMIC_tWR = 2; MPMC_DYNAMIC_tRC = 5; MPMC_DYNAMIC_tRFC = 5; MPMC_DYNAMIC_tXSR = 5; MPMC_DYNAMIC_tRRD = 2; MPMC_DYNAMIC_tMRD = 2; #if defined(SANSA_CLIP) || defined(SANSA_M200V4) /* 16 bits external bus, low power SDRAM, 16 Mbits = 2 Mbytes */ #define MEMORY_MODEL 0x21 #elif defined(SANSA_E200V2) || defined(SANSA_FUZE) /* 16 bits external bus, high performance SDRAM, 64 Mbits = 8 Mbytes */ #define MEMORY_MODEL 0x5 #else #error "The external memory in your player is unknown" #endif MPMC_DYNAMIC_RASCAS_0 = (2<<8)|2; /* CAS & RAS latency = 2 clock cycles */ MPMC_DYNAMIC_CONFIG_0 = (MEMORY_MODEL << 7); MPMC_DYNAMIC_RASCAS_1 = MPMC_DYNAMIC_CONFIG_1 = MPMC_DYNAMIC_RASCAS_2 = MPMC_DYNAMIC_CONFIG_2 = MPMC_DYNAMIC_RASCAS_3 = MPMC_DYNAMIC_CONFIG_3 = 0; MPMC_DYNAMIC_CONTROL = 0x82; /* SDRAM MODE, MPMCCLKOUT runs continuously */ /* this part is required, if you know why please explain */ unsigned int tmp = *(volatile unsigned int*)(0x30000000+0x2300*MEM); (void)tmp; /* we just need to read from this location */ MPMC_DYNAMIC_CONTROL = 0x2; /* SDRAM NORMAL, MPMCCLKOUT runs continuously */ MPMC_DYNAMIC_CONFIG_0 |= (1<<19); /* buffer enable */ } #endif void system_init(void) { #ifdef BOOTLOADER /* TODO: makes this work in the main build */ CGU_PROC = 0; /* fclk 24 MHz */ CGU_PERI &= ~0x7f; /* pclk 24 MHz */ asm volatile( "mrc p15, 0, r0, c1, c0 \n" "orr r0, r0, #0xC0000000 \n" /* asynchronous clocking */ "mcr p15, 0, r0, c1, c0 \n" : : : "r0" ); CGU_PLLA = AS3525_PLLA_SETTING; while(!(CGU_INTCTRL & (1<<0))); /* wait until PLLA is locked */ CGU_PROC = (AS3525_CPU_PREDIV << 2) | 1; CGU_PERI |= ((CLK_DIV(AS3525_PLLA_FREQ, AS3525_PCLK_FREQ) - 1) << 2) | 1; /* clk_in = PLLA */ asm volatile( "mov r0, #0 \n" "mcr p15, 0, r0, c7, c7 \n" /* invalidate icache & dcache */ "mrc p15, 0, r0, c1, c0 \n" /* control register */ "orr r0, r0, #0x1000 \n" /* enable icache */ "orr r0, r0, #4 \n" /* enable dcache */ "mcr p15, 0, r0, c1, c0 \n" : : : "r0" ); sdram_init(); #endif /* BOOTLOADER */ #if 0 /* the GPIO clock is already enabled by the dualboot function */ CGU_PERI |= CGU_GPIO_CLOCK_ENABLE; #endif /* enable timer interface for TIMER1 & TIMER2 */ CGU_PERI |= CGU_TIMERIF_CLOCK_ENABLE; setup_vic(); dma_init(); #ifndef BOOTLOADER /* Disable fast hardware power-off, to use power button normally * We don't need the power button in the bootloader. */ ascodec_init(); ascodec_write(AS3514_CVDD_DCDC3, ascodec_read(AS3514_CVDD_DCDC3) & (1<<2)); #endif /* !BOOTLOADER */ #ifdef HAVE_ADJUSTABLE_CPU_FREQ set_cpu_frequency(CPUFREQ_DEFAULT); #endif } void system_reboot(void) { } int system_memory_guard(int newmode) { (void)newmode; return 0; } #ifndef BOOTLOADER #ifdef HAVE_ADJUSTABLE_CPU_FREQ void set_cpu_frequency(long frequency) { int divider = frequency ? (CPUFREQ_MAX / frequency) : 16 /* minimal */ ; if(divider > 16) divider = 16; else if(divider < 1) divider = 1; cpu_frequency = CPUFREQ_MAX / divider; CGU_PROC &= ~(0xf << 4) /* clear divider bits */ ^ ((divider-1) << 4); } #endif /* HAVE_ADJUSTABLE_CPU_FREQ */ #endif /* BOOTLOADER */