/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2002 by Daniel Stenberg
 *
 * iPod driver based on code from the ipodlinux project - http://ipodlinux.org
 * Adapted for Rockbox in December 2005
 * Original file: linux/arch/armnommu/mach-ipod/keyboard.c
 * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
 *
 *
 * All files in this archive are subject to the GNU General Public License.
 * See the file COPYING in the source tree root for full license agreement.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

/*
 * Rockbox button functions
 */

#include <stdlib.h>
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "button.h"
#include "kernel.h"
#include "backlight.h"
#include "adc.h"
#include "serial.h"
#include "power.h"
#include "system.h"
#include "powermgmt.h"

/* Variable to use for setting button status in interrupt handler */
int int_btn = BUTTON_NONE;
#ifdef HAVE_WHEEL_POSITION
    static int wheel_position = -1;
    static bool send_events = true;
#endif

static void opto_i2c_init(void)
{
    int i, curr_value;

    /* wait for value to settle */
    i = 1000;
    curr_value = (inl(0x7000c104) << 16) >> 24;
    while (i > 0)
    {
        int new_value = (inl(0x7000c104) << 16) >> 24;

        if (new_value != curr_value) {
            i = 10000;
            curr_value = new_value;
        }
        else {
            i--;
        }
    }

    GPIOB_OUTPUT_VAL |= 0x10;
    DEV_EN |= 0x10000;
    DEV_RS |= 0x10000;
    udelay(5);
    DEV_RS &= ~0x10000; /* finish reset */

    outl(0xffffffff, 0x7000c120);
    outl(0xffffffff, 0x7000c124);
    outl(0xc00a1f00, 0x7000c100);
    outl(0x1000000, 0x7000c104);
}

static inline int ipod_4g_button_read(void)
{
    int whl = -1;
    
    /* The ipodlinux source had a udelay(250) here, but testing has shown that
       it is not needed - tested on Nano, Color/Photo and Video. */
    /* udelay(250);*/

    int btn = BUTTON_NONE;
    unsigned reg = 0x7000c104;
    if ((inl(0x7000c104) & 0x4000000) != 0) {
        unsigned status = inl(0x7000c140);

        reg = reg + 0x3C;      /* 0x7000c140 */
        outl(0x0, 0x7000c140); /* clear interrupt status? */

        if ((status & 0x800000ff) == 0x8000001a) {
            static int old_wheel_value IDATA_ATTR = -1;
            static int wheel_repeat = 0;

            if (status & 0x100)
                btn |= BUTTON_SELECT;
            if (status & 0x200)
                btn |= BUTTON_RIGHT;
            if (status & 0x400)
                btn |= BUTTON_LEFT;
            if (status & 0x800)
                btn |= BUTTON_PLAY;
            if (status & 0x1000)
                btn |= BUTTON_MENU;
            if (status & 0x40000000) {
                /* NB: highest wheel = 0x5F, clockwise increases */
                int new_wheel_value = (status << 9) >> 25;
                whl = new_wheel_value;
                backlight_on();
                /* The queue should have no other events when scrolling */
                if (queue_empty(&button_queue) && old_wheel_value >= 0) {

                    /* This is for later = BUTTON_SCROLL_TOUCH;*/
                    int wheel_delta = new_wheel_value - old_wheel_value;
                    unsigned long data;
                    int wheel_keycode;

                    if (wheel_delta < -48)
                        wheel_delta += 96; /* Forward wrapping case */
                    else if (wheel_delta > 48)
                        wheel_delta -= 96; /* Backward wrapping case */

                    if (wheel_delta > 4) {
                        wheel_keycode = BUTTON_SCROLL_FWD;
                    } else if (wheel_delta < -4) {
                        wheel_keycode = BUTTON_SCROLL_BACK;
                    } else goto wheel_end;

#ifdef HAVE_WHEEL_POSITION
                    if (send_events)
#endif
                    {
                    data = (wheel_delta << 16) | new_wheel_value;
                    queue_post(&button_queue, wheel_keycode | wheel_repeat,
                            (void *)data);
                    }

                    if (!wheel_repeat) wheel_repeat = BUTTON_REPEAT;
                }

                old_wheel_value = new_wheel_value;
            } else if (old_wheel_value >= 0) {
                /* scroll wheel up */
                old_wheel_value = -1;
                wheel_repeat = 0;
            }

        } else if (status == 0xffffffff) {
            opto_i2c_init();
        }
    }

wheel_end:

    if ((inl(reg) & 0x8000000) != 0) {
        outl(0xffffffff, 0x7000c120);
        outl(0xffffffff, 0x7000c124);
    }
    /* Save the new absolute wheel position */
    wheel_position = whl;
    return btn;
}

#ifdef HAVE_WHEEL_POSITION
int wheel_status(void)
{
    return wheel_position;
}
 
void wheel_send_events(bool send)
{
    send_events = send;
}
#endif

void ipod_4g_button_int(void)
{
    CPU_HI_INT_CLR = I2C_MASK;
    /* The following delay was 250 in the ipodlinux source, but 50 seems to 
       work fine - tested on Nano, Color/Photo and Video. */
    udelay(50); 
    outl(0x0, 0x7000c140); 
    int_btn = ipod_4g_button_read();
    outl(inl(0x7000c104) | 0xC000000, 0x7000c104);
    outl(0x400a1f00, 0x7000c100);

    GPIOB_OUTPUT_VAL |= 0x10;
    CPU_INT_EN = 0x40000000;
    CPU_HI_INT_EN = I2C_MASK;
}

void button_init_device(void)
{
    opto_i2c_init();
    /* hold button - enable as input */
    GPIOA_ENABLE |= 0x20;
    GPIOA_OUTPUT_EN &= ~0x20; 
    /* hold button - set interrupt levels */
    GPIOA_INT_LEV = ~(GPIOA_INPUT_VAL & 0x20);
    GPIOA_INT_CLR = GPIOA_INT_STAT & 0x20;
    /* enable interrupts */
    GPIOA_INT_EN = 0x20;
    /* unmask interrupt */
    CPU_INT_EN = 0x40000000;
    CPU_HI_INT_EN = I2C_MASK;
}

/*
 * Get button pressed from hardware
 */
int button_read_device(void)
{
    static bool hold_button = false;
    bool hold_button_old;

    /* normal buttons */
    hold_button_old = hold_button;
    hold_button = button_hold();

    if (hold_button != hold_button_old)
        backlight_hold_changed(hold_button);

    /* The int_btn variable is set in the button interrupt handler */
    return int_btn;
}

bool button_hold(void)
{
    return (GPIOA_INPUT_VAL & 0x20)?false:true;
}

bool headphones_inserted(void)
{
    return (GPIOA_INPUT_VAL & 0x80)?true:false;
}