/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Driver for WM8751 audio codec * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in December 2005 * * Original file: linux/arch/armnommu/mach-ipod/audio.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "kernel.h" #include "wmcodec.h" #include "audio.h" #include "audiohw.h" #include "system.h" #include "sound.h" const struct sound_settings_info audiohw_settings[] = { [SOUND_VOLUME] = {"dB", 0, 1, -74, 6, -25}, [SOUND_BASS] = {"dB", 1, 15, -60, 90, 0}, [SOUND_TREBLE] = {"dB", 1, 15, -60, 90, 0}, [SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0}, [SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0}, [SOUND_STEREO_WIDTH] = {"%", 0, 5, 0, 250, 100}, #ifdef HAVE_RECORDING /* -17.25dB to 30.0dB in 0.75dB increments 64 steps*/ [SOUND_LEFT_GAIN] = {"dB", 2, 75, -1725, 3000, 0}, [SOUND_RIGHT_GAIN] = {"dB", 2, 75, -1725, 3000, 0}, [SOUND_MIC_GAIN] = {"dB", 2, 75, -1725, 3000, 3000}, #endif #ifdef AUDIOHW_HAVE_BASS_CUTOFF [SOUND_BASS_CUTOFF] = {"Hz", 0, 70, 130, 200, 200}, #endif #ifdef AUDIOHW_HAVE_TREBLE_CUTOFF [SOUND_TREBLE_CUTOFF] = {"kHz", 0, 4, 4, 8, 4}, #endif #ifdef AUDIOHW_HAVE_DEPTH_3D [SOUND_DEPTH_3D] = {"%", 0, 1, 0, 15, 0}, #endif }; static uint16_t wmcodec_regs[WM_NUM_REGS] = { [0 ... WM_NUM_REGS-1] = 0x200, /* set invalid data in gaps */ #ifdef HAVE_WM8750 [LINVOL] = 0x097, [RINVOL] = 0x097, #endif [LOUT1] = 0x079, [ROUT1] = 0x079, [DACCTRL] = 0x008, [AINTFCE] = 0x00a, [CLOCKING] = 0x000, [LEFTGAIN] = 0x0ff, [RIGHTGAIN] = 0x0ff, [BASSCTRL] = 0x00f, [TREBCTRL] = 0x00f, /* [RESET] */ #ifdef HAVE_WM8750 [ENHANCE_3D] = 0x000, [ALC1] = 0x07b, [ALC2] = 0x000, [ALC3] = 0x032, [NGAT] = 0x000, [LADCVOL] = 0x0c3, [RADCVOL] = 0x0c3, #endif [ADDITIONAL1] = 0x0c0, [ADDITIONAL2] = 0x000, [PWRMGMT1] = 0x000, [PWRMGMT2] = 0x000, [ADDITIONAL3] = 0x000, #ifdef HAVE_WM8750 [ADCIM] = 0x000, [ADCL] = 0x000, [ADCR] = 0x000, #endif [LEFTMIX1] = 0x050, [LEFTMIX2] = 0x050, [RIGHTMIX1] = 0x050, [RIGHTMIX2] = 0x050, [MONOMIX1] = 0x050, [MONOMIX2] = 0x050, [LOUT2] = 0x079, [ROUT2] = 0x079, [MONOOUT] = 0x079 }; /* global prescaler vars */ static int prescalertone = 0; static int prescaler3d = 0; static void wmcodec_set_reg(unsigned int reg, unsigned int val) { if (reg >= WM_NUM_REGS || (wmcodec_regs[reg] & 0x200)) /* invalid register */ return; wmcodec_regs[reg] = val & 0x1ff; wmcodec_write(reg, wmcodec_regs[reg]); } static void wmcodec_set_bits(unsigned int reg, unsigned int bits) { wmcodec_set_reg(reg, wmcodec_regs[reg] | bits); } static void wmcodec_clear_bits(unsigned int reg, unsigned int bits) { wmcodec_set_reg(reg, wmcodec_regs[reg] & ~bits); } static void wmcodec_set_masked(unsigned int reg, unsigned int val, unsigned int mask ) { wmcodec_set_reg(reg, (wmcodec_regs[reg] & ~mask) | val); } /* convert tenth of dB volume (-730..60) to master volume register value */ int tenthdb2master(int db) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB (0x7f) */ /* 1111001 == 0dB (0x79) */ /* 0110000 == -73dB (0x30) */ /* 0101111..0000000 == mute (<= 0x2f) */ if (db < VOLUME_MIN) return 0x0; else return (db / 10) + 73 + 0x30; } static int tone_tenthdb2hw(int value) { /* -6.0db..+0db..+9.0db step 1.5db - translate -60..+0..+90 step 15 to 10..6..0 step -1. */ value = 10 - (value + 60) / 15; if (value == 6) value = 0xf; /* 0db -> off */ return value; } #ifdef AUDIOHW_HAVE_BASS_CUTOFF void audiohw_set_bass_cutoff(int val) { if ( val == 130 ) wmcodec_clear_bits(BASSCTRL, BASSCTRL_BC); else wmcodec_set_bits(BASSCTRL, BASSCTRL_BC); } #endif #ifdef AUDIOHW_HAVE_TREBLE_CUTOFF void audiohw_set_treble_cutoff(int val) { if ( val == 8 ) wmcodec_clear_bits(TREBCTRL, TREBCTRL_TC); else wmcodec_set_bits(TREBCTRL, TREBCTRL_TC); } #endif #ifdef HAVE_RECORDING static int recvol2hw(int value) { /* -1725 to 3000 => 0 ... 23 ... 63 */ return ((4 * value) / 300) + 23; } #endif int sound_val2phys(int setting, int value) { int result; switch (setting) { #ifdef AUDIOHW_HAVE_DEPTH_3D case SOUND_DEPTH_3D: result = (100 * value + 8) / 15; break; #endif default: result = value; } return result; } static void audiohw_mute(bool mute) { /* Mute: Set DACMU = 1 to soft-mute the audio DACs. */ /* Unmute: Set DACMU = 0 to soft-un-mute the audio DACs. */ if (mute) wmcodec_set_bits(DACCTRL, DACCTRL_DACMU); else wmcodec_clear_bits(DACCTRL, DACCTRL_DACMU); } /* Reset and power up the WM8751 */ void audiohw_preinit(void) { #if defined(MROBE_100) /* controls headphone ouput */ GPIOL_ENABLE |= 0x10; GPIOL_OUTPUT_EN |= 0x10; GPIOL_OUTPUT_VAL |= 0x10; /* disable */ #elif defined(MPIO_HD200) /* control headphone output * disabled on startup */ and_l(~(1<<25), &GPIO1_OUT); or_l((1<<25), &GPIO1_ENABLE); or_l((1<<25), &GPIO1_FUNCTION); #elif defined(MPIO_HD300) and_l(~(1<<5), &GPIO1_OUT); or_l((1<<5), &GPIO1_ENABLE); or_l((1<<5), &GPIO1_FUNCTION); #endif /* * 1. Switch on power supplies. * By default the WM8751 is in Standby Mode, the DAC is * digitally muted and the Audio Interface, Line outputs * and Headphone outputs are all OFF (DACMU = 1 Power * Management registers 1 and 2 are all zeros). */ wmcodec_write(RESET, RESET_RESET); /*Reset*/ /* 2. Enable Vmid and VREF. */ wmcodec_set_bits(PWRMGMT1, PWRMGMT1_VREF | PWRMGMT1_VMIDSEL_5K); #ifdef CODEC_SLAVE wmcodec_set_bits(AINTFCE,AINTFCE_WL_16 | AINTFCE_FORMAT_I2S); #else /* BCLKINV=0(Dont invert BCLK) MS=1(Enable Master) LRSWAP=0 LRP=0 */ /* IWL=00(16 bit) FORMAT=10(I2S format) */ wmcodec_set_bits(AINTFCE, AINTFCE_MS | AINTFCE_WL_16 | AINTFCE_FORMAT_I2S); #endif /* Set default samplerate */ audiohw_set_frequency(HW_FREQ_DEFAULT); } /* Enable DACs and audio output after a short delay */ void audiohw_postinit(void) { /* From app notes: allow Vref to stabilize to reduce clicks */ sleep(HZ); #ifdef AUDIOHW_HAVE_DEPTH_3D wmcodec_set_bits(ENHANCE_3D, ENHANCE_3D_MODE3D_PLAYBACK); #endif /* 3. Enable DACs as required. */ wmcodec_set_bits(PWRMGMT2, PWRMGMT2_DACL | PWRMGMT2_DACR); /* 4. Enable line and / or headphone output buffers as required. */ #if defined(GIGABEAT_F) /* headphones + line-out */ wmcodec_set_bits(PWRMGMT2, PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1 | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2); #else /* headphones */ wmcodec_set_bits(PWRMGMT2, PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1); #endif /* Full -0dB on the DACS */ wmcodec_set_bits(LEFTGAIN, 0xff); wmcodec_set_bits(RIGHTGAIN, RIGHTGAIN_RDVU | 0xff); /* Enable Thermal shutdown, Timeout when zero-crossing in use, * set analog bias for 3.3V, monomix to DACR */ wmcodec_set_reg(ADDITIONAL1, ADDITIONAL1_TSDEN | ADDITIONAL1_TOEN | ADDITIONAL1_DMONOMIX_LLRR | ADDITIONAL1_VSEL_DEFAULT); /* Enable zero-crossing in out stage */ wmcodec_set_bits(LOUT1, LOUT1_LO1ZC); wmcodec_set_bits(ROUT1, ROUT1_RO1ZC); wmcodec_set_bits(LOUT2, LOUT2_LO2ZC); wmcodec_set_bits(ROUT2, ROUT2_RO2ZC); /* route signal from DAC to mixers */ wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO); #ifdef TOSHIBA_GIGABEAT_F #ifdef HAVE_HARDWARE_BEEP /* Single-ended mono input */ wmcodec_set_reg(MONOMIX1, 0x00); /* Route mono input to both outputs at 0dB */ wmcodec_set_reg(LEFTMIX2, LEFTMIX2_MI2LO | LEFTMIX2_MI2LOVOL(2)); wmcodec_set_reg(RIGHTMIX1, RIGHTMIX1_MI2RO | RIGHTMIX1_MI2ROVOL(2)); #endif #endif /* lower power consumption */ wmcodec_set_masked(PWRMGMT1, PWRMGMT1_VMIDSEL_50K, PWRMGMT1_VMIDSEL_MASK); audiohw_mute(false); #if defined(MROBE_100) /* enable headphone output */ GPIOL_OUTPUT_VAL &= ~0x10; GPIOL_OUTPUT_EN |= 0x10; #elif defined(MPIO_HD200) /* enable headphone output */ or_l((1<<25), &GPIO1_OUT); #elif defined(MPIO_HD300) or_l((1<<5), &GPIO1_OUT); #endif } void audiohw_set_master_vol(int vol_l, int vol_r) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB */ /* 1111001 == 0dB */ /* 0110000 == -73dB */ /* 0101111 == mute (0x2f) */ wmcodec_set_masked(LOUT1, LOUT1_LOUT1VOL(vol_l), LOUT1_LOUT1VOL_MASK); wmcodec_set_masked(ROUT1, ROUT1_RO1VU | ROUT1_ROUT1VOL(vol_r), ROUT1_ROUT1VOL_MASK); } #ifdef TOSHIBA_GIGABEAT_F void audiohw_set_lineout_vol(int vol_l, int vol_r) { wmcodec_set_masked(LOUT2, LOUT2_LOUT2VOL(vol_l), LOUT2_LOUT2VOL_MASK); wmcodec_set_masked(ROUT2, ROUT2_RO2VU | ROUT2_ROUT2VOL(vol_r), ROUT2_ROUT2VOL_MASK); } #endif void audiohw_set_bass(int value) { wmcodec_set_masked(BASSCTRL, BASSCTRL_BASS(tone_tenthdb2hw(value)), BASSCTRL_BASS_MASK); } void audiohw_set_treble(int value) { wmcodec_set_masked(TREBCTRL, TREBCTRL_TREB(tone_tenthdb2hw(value)), TREBCTRL_TREB_MASK); } static void sync_prescaler(void) { int prescaler; prescaler = prescalertone + prescaler3d; /* attenuate in 0.5dB steps (0dB - -127dB) */ wmcodec_set_reg(LEFTGAIN, 0xff - (prescaler & LEFTGAIN_LDACVOL)); wmcodec_set_reg(RIGHTGAIN, RIGHTGAIN_RDVU | (0xff - (prescaler & RIGHTGAIN_RDACVOL))); } void audiohw_set_prescaler(int value) { prescalertone = 3 * value / 15; /* value in tdB */ sync_prescaler(); } /* Nice shutdown of WM8751 codec */ void audiohw_close(void) { /* 1. Set DACMU = 1 to soft-mute the audio DACs. */ audiohw_mute(true); #if defined(MPIO_HD200) /* disable headphone out */ and_l(~(1<<25), &GPIO1_OUT); #elif defined(MPIO_HD300) and_l(~(1<<5), &GPIO1_OUT); #endif /* 2. Disable all output buffers. */ wmcodec_set_reg(PWRMGMT2, 0x0); /* 3. Switch off the power supplies. */ wmcodec_set_reg(PWRMGMT1, 0x0); } /* According to datasheet of WM8750 * clocking setup is needed in both slave and master mode */ void audiohw_set_frequency(int fsel) { (void)fsel; static const unsigned char srctrl_table[HW_NUM_FREQ] = { HW_HAVE_11_([HW_FREQ_11] = CODEC_SRCTRL_11025HZ,) HW_HAVE_22_([HW_FREQ_22] = CODEC_SRCTRL_22050HZ,) HW_HAVE_44_([HW_FREQ_44] = CODEC_SRCTRL_44100HZ,) HW_HAVE_88_([HW_FREQ_88] = CODEC_SRCTRL_88200HZ,) }; if ((unsigned)fsel >= HW_NUM_FREQ) fsel = HW_FREQ_DEFAULT; wmcodec_set_reg(CLOCKING, srctrl_table[fsel]); } #ifdef HAVE_WM8750 #ifdef AUDIOHW_HAVE_DEPTH_3D /* Set the depth of the 3D effect */ void audiohw_set_depth_3d(int val) { if (val > 0) { wmcodec_set_bits(ENHANCE_3D, ENHANCE_3D_3DEN); wmcodec_set_masked(ENHANCE_3D, ENHANCE_3D_DEPTH(val), ENHANCE_3D_DEPTH_MASK); } else { wmcodec_clear_bits(ENHANCE_3D, ENHANCE_3D_3DEN); } /* -4 dB @ full setting * this gives approximately constant volume on setting change * and prevents clipping (at least on my HD300) */ prescaler3d = 8*val / 15; sync_prescaler(); } #endif #ifdef HAVE_RECORDING #if 0 static void audiohw_set_ngat(int ngath, int type, bool enable) { /* This function controls Noise gate function * of the codec. This can only run in conjunction * with ALC */ if(enable) wmcodec_set_reg(NGAT, NGAT_NGG(type) | NGAT_NGTH(ngath) | NGAT_NGAT); else wmcodec_clear_bits(NGAT, NGAT_NGAT); } static void audiohw_set_alc(unsigned char level, /* signal level at ADC */ bool zc, /* zero cross detection */ unsigned char hold, /* hold time */ unsigned char decay, /* decay time */ unsigned char attack, /* attack time */ bool enable) /* hw function on/off */ { if(enable) { wmcodec_set_reg(ALC1, ALC1_ALCSEL_STEREO | ALC1_MAXGAIN(0x07) | ALC1_ALCL(level)); wmcodec_set_reg(ALC2, zc?ALC2_ALCZC:0 | ALC2_HLD(hold)); wmcodec_set_reg(ALC3, ALC3_DCY(decay) | ALC3_ATK(attack)); } else { wmcodec_set_masked(ALC1, ALC1_ALCSEL_DISABLED, ALC1_ALCSEL_MASK); } } #endif void audiohw_set_recsrc(int source, bool recording) { /* INPUT1 - FM radio * INPUT2 - Line-in * INPUT3 - MIC * * if recording == false we use analog bypass from input * turn off ADC, PGA to save power * turn on output buffer(s) * * if recording == true we route input signal to PGA * and monitoring picks up signal after PGA and ADC * turn on ADC, PGA, DAC, output buffer(s) */ switch(source) { case AUDIO_SRC_PLAYBACK: audiohw_mute(true); /* mute PGA, disable all audio paths but DAC and output stage*/ wmcodec_set_bits(LINVOL, LINVOL_LINMUTE); /* Mute */ wmcodec_set_bits(RINVOL, RINVOL_RINMUTE); /* Mute */ wmcodec_clear_bits(PWRMGMT2, PWRMGMT2_OUT3 | PWRMGMT2_MOUT | PWRMGMT2_ROUT2 | PWRMGMT2_LOUT2); /* route DAC signal to output mixer, disable INPUT routing */ wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO); wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO); wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO); /* unmute DAC */ audiohw_mute(false); break; case AUDIO_SRC_FMRADIO: if(recording) { audiohw_mute(true); /* Turn on PGA and ADC */ wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR); /* Setup input source for PGA as INPUT1 */ wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT1, ADCL_LINSEL_MASK); wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT1, ADCR_RINSEL_MASK); /* turn off ALC and NGAT as OF do */ /* audiohw_set_alc(0x00, false, 0x00, 0x00, 0x00, false); audiohw_set_ngat(0x00, 0x00, false); */ /* setup output digital data * default is LADC -> LDATA, RADC -> RDATA * so we don't touch this */ /* skip: power up DAC and output stage as its never powered down wmcodec_set_bits(PWRMGMT2, PWRMGMT2_DACL | PWRMGMT2_DACR | PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1); */ /* route DAC signal to output mixer, disable INPUT routing */ wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO); wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO); wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO); audiohw_mute(false); } else { audiohw_mute(true); /* turn off ADC, PGA */ wmcodec_clear_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR); /* setup monitor mode by routing input signal to outmix * at 0dB volume */ wmcodec_set_masked(LEFTMIX1, LEFTMIX1_LI2LOVOL(0x20), LEFTMIX1_LI2LOVOL_MASK); wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LI2LO | LEFTMIX1_LMIXSEL_LINPUT1 | LEFTMIX1_LD2LO); wmcodec_set_masked(RIGHTMIX2, RIGHTMIX2_RI2ROVOL(0x20), RIGHTMIX2_RI2ROVOL_MASK); wmcodec_set_bits(RIGHTMIX1, RIGHTMIX1_RMIXSEL_RINPUT1); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RI2RO | RIGHTMIX2_RD2RO); audiohw_mute(false); } break; #if (INPUT_SRC_CAPS & SRC_CAP_LINEIN) case AUDIO_SRC_LINEIN: audiohw_mute(true); /* Turn on PGA, ADC */ wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR); /* Setup input source for PGA as INPUT2 * MICBOOST disabled */ wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT2, ADCL_LINSEL_MASK); wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT2, ADCR_RINSEL_MASK); /* setup ALC and NGAT as OF do */ /* level, zc, hold, decay, attack, enable */ /* audiohw_set_alc(0x0b, true, 0x00, 0x03, 0x02, true); */ /* ngath, type, enable */ /* audiohw_set_ngat(0x08, 0x02, true); */ /* setup output digital data * default is LADC -> LDATA, RADC -> RDATA * so we don't touch this */ /* route DAC signal to output mixer, disable INPUT routing */ wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO); wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO); wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO); #if !defined(MPIO_HD300) /* HD300 uses the same socket for headphones and line-in */ audiohw_mute(false); #endif break; #endif #if (INPUT_SRC_CAPS & SRC_CAP_MIC) case AUDIO_SRC_MIC: audiohw_mute(true); /* Turn on PGA and ADC */ wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR); /* Setup input source for PGA as INPUT3 * MICBOOST disabled */ wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT3, ADCL_LINSEL_MASK); wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT3, ADCR_RINSEL_MASK); /* setup ALC and NGAT as OF do */ /* level, zc, hold, decay, attack, enable */ /* audiohw_set_alc(0x0f, false, 0x00, 0x05, 0x02, true); */ /* ngath, type, enable */ /* audiohw_set_ngat(0x1f, 0x00, true); */ /* setup output digital data * default is LADC -> LDATA, RADC -> RDATA * so we don't touch this */ /* route DAC signal to output mixer, disable INPUT routing */ wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO); wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO); wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO); wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO); audiohw_mute(false); break; #endif } /* switch(source) */ } /* Setup PGA gain */ void audiohw_set_recvol(int vol_l, int vol_r, int type) { wmcodec_set_reg(LINVOL, LINVOL_LIZC | LINVOL_LINVOL(recvol2hw(vol_l))); if (type == AUDIO_GAIN_MIC) wmcodec_set_reg(RINVOL, RINVOL_RIVU | RINVOL_RIZC | RINVOL_RINVOL(recvol2hw(vol_l))); else wmcodec_set_reg(RINVOL, RINVOL_RIVU | RINVOL_RIZC | RINVOL_RINVOL(recvol2hw(vol_r))); } #endif /* HAVE_RECORDING */ #endif /* HAVE_WM8750 */