/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Linus Nielsen Feltzing * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" .section .init.text,"ax",%progbits .global start start: /* PortalPlayer bootloader and startup code based on startup.s from the iPodLinux * loader * * Copyright (c) 2003, Daniel Palffy (dpalffy (at) rainstorm.org) * Copyright (c) 2005, Bernard Leach * */ #if CONFIG_CPU == PP5002 .equ PROC_ID, 0xc4000000 .equ COP_CTRL, 0xcf004058 .equ COP_STATUS, 0xcf004050 .equ IIS_CONFIG, 0xc0002500 .equ SLEEP, 0xca .equ WAKE, 0xce .equ SLEEPING, 0x4000 #else .equ PROC_ID, 0x60000000 .equ COP_CTRL, 0x60007004 .equ COP_STATUS, 0x60007004 .equ IIS_CONFIG, 0x70002800 .equ SLEEP, 0x80000000 .equ WAKE, 0x0 .equ SLEEPING, 0x80000000 .equ CACHE_CTRL, 0x6000c000 .equ CACHE_ENAB, 0x1 #endif msr cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ */ #ifndef E200R_INSTALLER /* 1 - Copy the bootloader to IRAM */ /* get the high part of our execute address */ bic r0, pc, #0xff /* r4 = pc & 0xffffff00 */ /* Copy bootloader to safe area - 0x40000000 (IRAM) */ mov r1, #0x40000000 ldr r2, =_dataend 1: cmp r2, r1 ldrhi r3, [r0], #4 strhi r3, [r1], #4 bhi 1b #ifndef IPOD_ARCH /* For builds on targets with mi4 firmware, scramble writes data to 0xe0-0xeb, so jump past that. pad_skip must then exist at an address >= 0xec */ b pad_skip .space 60*4 pad_skip: #endif /* IPOD_ARCH */ /* 2 - Jump both CPU and COP there */ ldr pc, =start_loc /* jump to the relocated start_loc: */ #endif /* E200R_INSTALLER */ start_loc: /* Find out which processor we are */ ldr r0, =PROC_ID ldrb r0, [r0] cmp r0, #0x55 beq cpu cop: /* put us (co-processor) to sleep */ ldr r0, =COP_CTRL mov r1, #SLEEP str r1, [r0] #ifdef CPU_PP502x /* COP: Invalidate cache if enabled */ ldr r2, =CACHE_CTRL ldr r1, [r2] tst r1, #CACHE_ENAB beq 2f ldr r0, =0xf000f044 ldr r1, [r0] orr r1, r1, #0x6 str r1, [r0] 1: ldr r1, [r2] tst r1, #0x8000 bne 1b 2: #endif /* CPU_PP502x */ ldr r0, =startup_loc ldr pc, [r0] cpu: /* Wait for COP to be sleeping */ ldr r0, =COP_STATUS 1: ldr r1, [r0] tst r1, #SLEEPING beq 1b /* Initialise bss section to zero */ ldr r0, =_edata ldr r1, =_end mov r2, #0 1: cmp r1, r0 strhi r2, [r0], #4 bhi 1b /* Set up some stack and munge it with 0xdeadbeef */ ldr sp, =stackend ldr r0, =stackbegin ldr r1, =0xdeadbeef 1: cmp sp, r0 strhi r1, [r0], #4 bhi 1b /* execute the loader - this will load an image to 0x10000000 */ bl main /* store actual startup location returned by main() */ ldr r1, =startup_loc str r0, [r1] #ifdef CPU_PP502x /* Flush cache if enabled */ ldr r2, =CACHE_CTRL ldr r1, [r2] tst r1, #CACHE_ENAB beq 2f ldr r0, =0xf000f044 ldr r1, [r0] orr r1, r1, #0x2 str r1, [r0] 1: ldr r1, [r2] tst r1, #0x8000 bne 1b 2: #endif /* CPU_PP502x */ /* Wake up the coprocessor before executing the firmware */ ldr r0, =COP_CTRL mov r1, #WAKE str r1, [r0] #ifdef SANSA_C200 /* Magic for loading the c200 OF */ ldr r0, =0xb00d10ad mov r1, #0x700 ldr r2, =0xfff0 mov r3, #0x7 #endif ldr r4, =startup_loc ldr pc, [r4] startup_loc: .word 0x0 #ifdef IPOD_ARCH .align 8 /* starts at 0x100 */ .global boot_table boot_table: /* here comes the boot table, don't move its offset - preceding code+data must stay <= 256 bytes */ .space 400 #endif