/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Barry Wardell * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* Taken from button-h10.c by Barry Wardell and reverse engineering by MrH. */ #include "system.h" #include "button.h" #include "backlight.h" #include "powermgmt.h" #define WHEEL_REPEAT_INTERVAL 300000 #define WHEEL_FAST_ON_INTERVAL 20000 #define WHEEL_FAST_OFF_INTERVAL 60000 #define WHEELCLICKS_PER_ROTATION 48 /* wheelclicks per full rotation */ /* Clickwheel */ #ifndef BOOTLOADER static unsigned int old_wheel_value = 0; static unsigned int wheel_repeat = BUTTON_NONE; static unsigned int wheel_click_count = 0; static unsigned int wheel_delta = 0; static int wheel_fast_mode = 0; static unsigned long last_wheel_usec = 0; static unsigned long wheel_velocity = 0; static long last_wheel_post = 0; static long next_backlight_on = 0; /* Buttons */ static bool hold_button = false; static bool hold_button_old = false; #define _button_hold() hold_button #else #define _button_hold() ((GPIOF_INPUT_VAL & 0x80) != 0) #endif /* BOOTLOADER */ static int int_btn = BUTTON_NONE; void button_init_device(void) { /* Enable all buttons */ GPIOF_OUTPUT_EN &= ~0xff; GPIOF_ENABLE |= 0xff; /* Scrollwheel light - enable control through GPIOG pin 7 and set timeout */ GPIOG_OUTPUT_EN |= 0x80; GPIOG_ENABLE = 0x80; #ifndef BOOTLOADER /* Mask these before performing init ... because init has possibly occurred before */ GPIOF_INT_EN &= ~0xff; GPIOH_INT_EN &= ~0xc0; /* Get current tick before enabling button interrupts */ last_wheel_usec = USEC_TIMER; last_wheel_post = last_wheel_usec; GPIOH_ENABLE |= 0xc0; GPIOH_OUTPUT_EN &= ~0xc0; /* Read initial buttons */ button_int(); GPIOF_INT_CLR = 0xff; /* Read initial wheel value (bit 6-7 of GPIOH) */ old_wheel_value = GPIOH_INPUT_VAL & 0xc0; GPIOH_INT_LEV = (GPIOH_INT_LEV & ~0xc0) | (old_wheel_value ^ 0xc0); GPIOH_INT_CLR = 0xc0; /* Enable button interrupts */ GPIOF_INT_EN |= 0xff; GPIOH_INT_EN |= 0xc0; CPU_INT_EN = HI_MASK; CPU_HI_INT_EN = GPIO1_MASK; #endif /* BOOTLOADER */ } bool button_hold(void) { return _button_hold(); } /* clickwheel */ #ifndef BOOTLOADER void clickwheel_int(void) { /* Read wheel * Bits 6 and 7 of GPIOH change as follows: * Clockwise rotation 01 -> 00 -> 10 -> 11 * Counter-clockwise 11 -> 10 -> 00 -> 01 * * This is equivalent to wheel_value of: * Clockwise rotation 0x40 -> 0x00 -> 0x80 -> 0xc0 * Counter-clockwise 0xc0 -> 0x80 -> 0x00 -> 0x40 */ static const unsigned char wheel_tbl[2][4] = { /* 0x00 0x40 0x80 0xc0 */ /* Wheel value */ { 0x40, 0xc0, 0x00, 0x80 }, /* Clockwise rotation */ { 0x80, 0x00, 0xc0, 0x40 }, /* Counter-clockwise */ }; unsigned int wheel_value; wheel_value = GPIOH_INPUT_VAL & 0xc0; GPIOH_INT_LEV = (GPIOH_INT_LEV & ~0xc0) | (wheel_value ^ 0xc0); GPIOH_INT_CLR = GPIOH_INT_STAT & 0xc0; if (!hold_button) { unsigned int btn = BUTTON_NONE; if (old_wheel_value == wheel_tbl[0][wheel_value >> 6]) btn = BUTTON_SCROLL_FWD; else if (old_wheel_value == wheel_tbl[1][wheel_value >> 6]) btn = BUTTON_SCROLL_BACK; if (btn != BUTTON_NONE) { int repeat = 1; /* assume repeat */ unsigned long usec = USEC_TIMER; unsigned v = (usec - last_wheel_usec) & 0x7fffffff; v = (v>0) ? 1000000 / v : 0; /* clicks/sec = 1000000 * clicks/usec */ v = (v>0xffffff) ? 0xffffff : v; /* limit to 24 bit */ /* some velocity filtering to smooth things out */ wheel_velocity = (7*wheel_velocity + v) / 8; if (btn != wheel_repeat) { /* direction reversals nullify all fast mode states */ wheel_repeat = btn; repeat = wheel_fast_mode = wheel_velocity = wheel_click_count = 0; } if (wheel_fast_mode != 0) { /* fast OFF happens immediately when velocity drops below threshold */ if (TIME_AFTER(usec, last_wheel_usec + WHEEL_FAST_OFF_INTERVAL)) { /* moving out of fast mode */ wheel_fast_mode = 0; /* reset velocity */ wheel_velocity = 0; /* wheel_delta is always 1 in slow mode */ wheel_delta = 1; } } else { /* fast ON gets filtered to avoid inadvertent jumps to fast mode */ if (repeat && wheel_velocity > 1000000/WHEEL_FAST_ON_INTERVAL) { /* moving into fast mode */ wheel_fast_mode = 1 << 31; wheel_click_count = 0; wheel_velocity = 1000000/WHEEL_FAST_OFF_INTERVAL; } else if (++wheel_click_count < 2) { btn = BUTTON_NONE; } /* wheel_delta is always 1 in slow mode */ wheel_delta = 1; } if (TIME_AFTER(current_tick, next_backlight_on) || v <= 4) { /* poke backlight to turn it on or maintain it no more often than every 1/4 second*/ next_backlight_on = current_tick + HZ/4; backlight_on(); buttonlight_on(); reset_poweroff_timer(); } if (btn != BUTTON_NONE) { wheel_click_count = 0; /* generate repeats if quick enough */ if (repeat && TIME_BEFORE(usec, last_wheel_post + WHEEL_REPEAT_INTERVAL)) btn |= BUTTON_REPEAT; last_wheel_post = usec; if (queue_empty(&button_queue)) { queue_post(&button_queue, btn, wheel_fast_mode | (wheel_delta << 24) | wheel_velocity*360/WHEELCLICKS_PER_ROTATION); /* message posted - reset delta */ wheel_delta = 1; } else { /* skipped post - increment delta */ if (++wheel_delta > 0x7f) wheel_delta = 0x7f; } } last_wheel_usec = usec; } } old_wheel_value = wheel_value; } #endif /* BOOTLOADER */ /* device buttons */ void button_int(void) { unsigned char state; int_btn = BUTTON_NONE; state = GPIOF_INPUT_VAL & 0xff; #ifndef BOOTLOADER GPIOF_INT_LEV = (GPIOF_INT_LEV & ~0xff) | (state ^ 0xff); GPIOF_INT_CLR = GPIOF_INT_STAT; hold_button = (state & 0x80) != 0; #endif if (!_button_hold()) { /* Read normal buttons */ if ((state & 0x01) == 0) int_btn |= BUTTON_REC; if ((state & 0x02) == 0) int_btn |= BUTTON_DOWN; if ((state & 0x04) == 0) int_btn |= BUTTON_RIGHT; if ((state & 0x08) == 0) int_btn |= BUTTON_LEFT; if ((state & 0x10) == 0) int_btn |= BUTTON_SELECT; /* The centre button */ if ((state & 0x20) == 0) int_btn |= BUTTON_UP; /* The "play" button */ if ((state & 0x40) != 0) int_btn |= BUTTON_POWER; } } /* * Get button pressed from hardware */ int button_read_device(void) { #ifdef BOOTLOADER /* Read buttons directly in the bootloader */ button_int(); #else /* light handling */ if (hold_button != hold_button_old) { hold_button_old = hold_button; backlight_hold_changed(hold_button); } #endif /* BOOTLOADER */ /* The int_btn variable is set in the button interrupt handler */ return int_btn; }