/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2011 by Amaury Pouly
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

#include "config.h"
#include "system.h"
#include "power.h"
#include "string.h"
#include "usb.h"
#include "system-target.h"
#include "power-imx233.h"
#include "pinctrl-imx233.h"
#include "fmradio_i2c.h"

struct current_step_bit_t
{
    unsigned current;
    uint32_t bit;
};

/* in decreasing order */
static struct current_step_bit_t g_charger_current_bits[] =
{
    { 400, HW_POWER_CHARGE__BATTCHRG_I__400mA },
    { 200, HW_POWER_CHARGE__BATTCHRG_I__200mA },
    { 100, HW_POWER_CHARGE__BATTCHRG_I__100mA },
    { 50, HW_POWER_CHARGE__BATTCHRG_I__50mA },
    { 20, HW_POWER_CHARGE__BATTCHRG_I__20mA },
    { 10, HW_POWER_CHARGE__BATTCHRG_I__10mA }
};

/* in decreasing order */
static struct current_step_bit_t g_charger_stop_current_bits[] =
{
    { 100, HW_POWER_CHARGE__STOP_ILIMIT__100mA },
    { 50, HW_POWER_CHARGE__STOP_ILIMIT__50mA },
    { 20, HW_POWER_CHARGE__STOP_ILIMIT__20mA },
    { 10, HW_POWER_CHARGE__STOP_ILIMIT__10mA }
};

/* in decreasing order */
static struct current_step_bit_t g_4p2_charge_limit_bits[] =
{
    { 400, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__400mA },
    { 200, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__200mA },
    { 100, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__100mA },
    { 50, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__50mA },
    { 20, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__20mA },
    { 10, HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__10mA }
};

void INT_VDD5V(void)
{
    if(HW_POWER_CTRL & HW_POWER_CTRL__VBUSVALID_IRQ)
    {
        if(HW_POWER_STS & HW_POWER_STS__VBUSVALID)
            usb_insert_int();
        else
            usb_remove_int();
        /* reverse polarity */
        __REG_TOG(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
        /* enable int */
        __REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__VBUSVALID_IRQ;
    }
}

void power_init(void)
{
    /* setup vbusvalid parameters: set threshold to 4v and power up comparators */
    __REG_CLR(HW_POWER_5VCTRL) = HW_POWER_5VCTRL__VBUSVALID_TRSH_BM;
    __REG_SET(HW_POWER_5VCTRL) = HW_POWER_5VCTRL__VBUSVALID_TRSH_4V |
        HW_POWER_5VCTRL__PWRUP_VBUS_CMPS;
    /* enable vbusvalid detection method for the dcdc (improves efficiency) */
    __REG_SET(HW_POWER_5VCTRL) = HW_POWER_5VCTRL__VBUSVALID_5VDETECT;
    /* clear vbusvalid irq and set correct polarity */
    __REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__VBUSVALID_IRQ;
    if(HW_POWER_STS & HW_POWER_STS__VBUSVALID)
        __REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
    else
        __REG_SET(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
    __REG_SET(HW_POWER_CTRL) = HW_POWER_CTRL__ENIRQ_VBUS_VALID;
    imx233_icoll_enable_interrupt(INT_SRC_VDD5V, true);
    /* setup linear regulator offsets to 25 mV below to prevent contention between
     * linear regulators and DCDC */
    __FIELD_SET(HW_POWER_VDDDCTRL, LINREG_OFFSET, 2);
    __FIELD_SET(HW_POWER_VDDACTRL, LINREG_OFFSET, 2);
    __FIELD_SET(HW_POWER_VDDIOCTRL, LINREG_OFFSET, 2);
    /* enable a few bits controlling the DC-DC as recommended by Freescale */
    __REG_SET(HW_POWER_LOOPCTRL) = HW_POWER_LOOPCTRL__TOGGLE_DIF |
        HW_POWER_LOOPCTRL__EN_CM_HYST;
    __FIELD_SET(HW_POWER_LOOPCTRL, EN_RCSCALE, HW_POWER_LOOPCTRL__EN_RCSCALE__2X);
}

void power_off(void)
{
    /* wait a bit, useful for the user to stop touching anything */
    sleep(HZ / 2);
#ifdef SANSA_FUZEPLUS
    /* This pin seems to be important to shutdown the hardware properly */
    imx233_pinctrl_acquire_pin(0, 9, "power off");
    imx233_set_pin_function(0, 9, PINCTRL_FUNCTION_GPIO);
    imx233_enable_gpio_output(0, 9, true);
    imx233_set_gpio_output(0, 9, true);
#endif
    /* power down */
    HW_POWER_RESET = HW_POWER_RESET__UNLOCK | HW_POWER_RESET__PWD;
    while(1);
}

unsigned int power_input_status(void)
{
    return (usb_detect() == USB_INSERTED)
        ? POWER_INPUT_MAIN_CHARGER : POWER_INPUT_NONE;
}

bool charging_state(void)
{
    return HW_POWER_STS & HW_POWER_STS__CHRGSTS;
}

void imx233_power_set_charge_current(unsigned current)
{
    __REG_CLR(HW_POWER_CHARGE) = HW_POWER_CHARGE__BATTCHRG_I_BM;
    /* find closest current LOWER THAN OR EQUAL TO the expected current */
    for(unsigned i = 0; i < ARRAYLEN(g_charger_current_bits); i++)
        if(current >= g_charger_current_bits[i].current)
        {
            current -= g_charger_current_bits[i].current;
            __REG_SET(HW_POWER_CHARGE) = g_charger_current_bits[i].bit;
        }
}

void imx233_power_set_stop_current(unsigned current)
{
    __REG_CLR(HW_POWER_CHARGE) = HW_POWER_CHARGE__STOP_ILIMIT_BM;
    /* find closest current GREATHER THAN OR EQUAL TO the expected current */
    unsigned sum = 0;
    for(unsigned i = 0; i < ARRAYLEN(g_charger_stop_current_bits); i++)
        sum += g_charger_stop_current_bits[i].current;
    for(unsigned i = 0; i < ARRAYLEN(g_charger_stop_current_bits); i++)
    {
        sum -= g_charger_stop_current_bits[i].current;
        if(current > sum)
        {
            current -= g_charger_stop_current_bits[i].current;
            __REG_SET(HW_POWER_CHARGE) = g_charger_stop_current_bits[i].bit;
        }
    }
}

struct imx233_power_info_t imx233_power_get_info(unsigned flags)
{
    static int dcdc_freqsel[8] = {
        [HW_POWER_MISC__FREQSEL__RES] = 0,
        [HW_POWER_MISC__FREQSEL__20MHz] = 20000,
        [HW_POWER_MISC__FREQSEL__24MHz] = 24000,
        [HW_POWER_MISC__FREQSEL__19p2MHz] = 19200,
        [HW_POWER_MISC__FREQSEL__14p4MHz] = 14200,
        [HW_POWER_MISC__FREQSEL__18MHz] = 18000,
        [HW_POWER_MISC__FREQSEL__21p6MHz] = 21600,
        [HW_POWER_MISC__FREQSEL__17p28MHz] = 17280,
    };
    
    struct imx233_power_info_t s;
    memset(&s, 0, sizeof(s));
    if(flags & POWER_INFO_VDDD)
    {
        s.vddd = HW_POWER_VDDDCTRL__TRG_MIN + HW_POWER_VDDDCTRL__TRG_STEP * __XTRACT(HW_POWER_VDDDCTRL, TRG);
        s.vddd_linreg = HW_POWER_VDDDCTRL & HW_POWER_VDDDCTRL__ENABLE_LINREG;
        s.vddd_linreg_offset = __XTRACT(HW_POWER_VDDDCTRL, LINREG_OFFSET) == 0 ? 0 :
            __XTRACT(HW_POWER_VDDDCTRL, LINREG_OFFSET) == 1 ? 25 : -25;
    }
    if(flags & POWER_INFO_VDDA)
    {
        s.vdda = HW_POWER_VDDACTRL__TRG_MIN + HW_POWER_VDDACTRL__TRG_STEP * __XTRACT(HW_POWER_VDDACTRL, TRG);
        s.vdda_linreg = HW_POWER_VDDACTRL & HW_POWER_VDDACTRL__ENABLE_LINREG;
        s.vdda_linreg_offset = __XTRACT(HW_POWER_VDDACTRL, LINREG_OFFSET) == 0 ? 0 :
            __XTRACT(HW_POWER_VDDACTRL, LINREG_OFFSET) == 1 ? 25 : -25;
    }
    if(flags & POWER_INFO_VDDIO)
    {
        s.vddio = HW_POWER_VDDIOCTRL__TRG_MIN + HW_POWER_VDDIOCTRL__TRG_STEP * __XTRACT(HW_POWER_VDDIOCTRL, TRG);
        s.vddio_linreg_offset = __XTRACT(HW_POWER_VDDIOCTRL, LINREG_OFFSET) == 0 ? 0 :
            __XTRACT(HW_POWER_VDDIOCTRL, LINREG_OFFSET) == 1 ? 25 : -25;
    }
    if(flags & POWER_INFO_VDDMEM)
    {
        s.vddmem = HW_POWER_VDDMEMCTRL__TRG_MIN + HW_POWER_VDDMEMCTRL__TRG_STEP * __XTRACT(HW_POWER_VDDMEMCTRL, TRG);
        s.vddmem_linreg = HW_POWER_VDDMEMCTRL & HW_POWER_VDDMEMCTRL__ENABLE_LINREG;
    }
    if(flags & POWER_INFO_DCDC)
    {
        s.dcdc_sel_pllclk = HW_POWER_MISC & HW_POWER_MISC__SEL_PLLCLK;
        s.dcdc_freqsel = dcdc_freqsel[__XTRACT(HW_POWER_MISC, FREQSEL)];
    }
    if(flags & POWER_INFO_CHARGE)
    {
        for(unsigned i = 0; i < ARRAYLEN(g_charger_current_bits); i++)
            if(HW_POWER_CHARGE & g_charger_current_bits[i].bit)
                s.charge_current += g_charger_current_bits[i].current;
        for(unsigned i = 0; i < ARRAYLEN(g_charger_stop_current_bits); i++)
            if(HW_POWER_CHARGE & g_charger_stop_current_bits[i].bit)
                s.stop_current += g_charger_stop_current_bits[i].current;
        s.charging = HW_POWER_STS & HW_POWER_STS__CHRGSTS;
        s.batt_adj = HW_POWER_BATTMONITOR & HW_POWER_BATTMONITOR__ENBATADJ;
    }
    if(flags & POWER_INFO_4P2)
    {
        s._4p2_enable = HW_POWER_DCDC4P2 & HW_POWER_DCDC4P2__ENABLE_4P2;
        s._4p2_dcdc = HW_POWER_DCDC4P2 & HW_POWER_DCDC4P2__ENABLE_DCDC;
        s._4p2_cmptrip = __XTRACT(HW_POWER_DCDC4P2, CMPTRIP);
        s._4p2_dropout = __XTRACT(HW_POWER_DCDC4P2, DROPOUT_CTRL);
    }
    if(flags & POWER_INFO_5V)
    {
        s._5v_pwd_charge_4p2 = HW_POWER_5VCTRL & HW_POWER_5VCTRL__PWD_CHARGE_4P2;
        s._5v_dcdc_xfer = HW_POWER_5VCTRL & HW_POWER_5VCTRL__DCDC_XFER;
        s._5v_enable_dcdc = HW_POWER_5VCTRL & HW_POWER_5VCTRL__ENABLE_DCDC;
        for(unsigned i = 0; i < ARRAYLEN(g_4p2_charge_limit_bits); i++)
            if(HW_POWER_5VCTRL & g_4p2_charge_limit_bits[i].bit)
                s._5v_charge_4p2_limit += g_4p2_charge_limit_bits[i].current;
        s._5v_vbusvalid_detect = HW_POWER_5VCTRL & HW_POWER_5VCTRL__VBUSVALID_5VDETECT;
        s._5v_vbus_cmps = HW_POWER_5VCTRL & HW_POWER_5VCTRL__PWRUP_VBUS_CMPS;
        s._5v_vbusvalid_thr =
            __XTRACT(HW_POWER_5VCTRL, VBUSVALID_TRSH) == 0 ?
                2900
                : 3900 + __XTRACT(HW_POWER_5VCTRL, VBUSVALID_TRSH) * 100;
    }
    return s;
}