/* * This config file is for the Sandisk Sansa View */ #define TARGET_TREE /* this target is using the target tree system */ /* For Rolo and boot loader */ #define MODEL_NUMBER 63 #define MODEL_NAME "Sandisk View" #define HW_SAMPR_CAPS (SAMPR_CAP_44) /* define this if you have recording possibility */ /* #define HAVE_RECORDING */ #define REC_SAMPR_CAPS (SAMPR_CAP_22) #define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */ #define REC_SAMPR_DEFAULT SAMPR_22 /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 240 #define LCD_HEIGHT 320 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ #ifndef BOOTLOADER /* define this if you have LCD enable function */ /* #define HAVE_LCD_ENABLE */ /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ /* #define HAVE_LCD_SLEEP */ /* #define HAVE_LCD_SLEEP_SETTING */ #endif /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ /* The only difference is that the power/hold is on the left instead of right on Fuze */ #define CONFIG_KEYPAD SANSA_FUZE_PAD /* Define this to have CPU boosted while scrolling in the UI */ #define HAVE_GUI_BOOST /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS /* define this if you have a real-time clock */ #ifndef BOOTLOADER /* #define CONFIG_RTC RTC_ */ #endif /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Required for MicroSD cards */ #define HAVE_FAT16SUPPORT /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define AB_REPEAT_ENABLE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* #define HAVE_BACKLIGHT_BRIGHTNESS */ /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* define to activate advanced wheel acceleration code */ #define HAVE_WHEEL_ACCELERATION /* define from which rotation speed [degree/sec] on the acceleration starts */ #define WHEEL_ACCEL_START 540 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ #define WHEEL_ACCELERATION 1 /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD #define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_SIMPLE #define HAVE_POWEROFF_WHILE_CHARGING /* define current usage levels */ #define CURRENT_NORMAL 30 /* Toni's measurements in Nov 2008 */ #define CURRENT_BACKLIGHT 40 /* Screen is about 20, blue LEDs are another 20, so 40 if both */ #define CURRENT_RECORD 30 /* flash player, so this is just unboosted current*/ /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have a PortalPlayer PP5024 */ #define CONFIG_CPU PP6100 /* Define this if you want to use the PP5024 i2c interface */ #define CONFIG_I2C I2C_PP5024 /* define this if the hardware can be powered off while charging */ /* Sansa can't be powered off while charging */ /* #define HAVE_POWEROFF_WHILE_CHARGING */ /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* Define this to the CPU frequency */ #define CPU_FREQ 250000000 /* Type of LCD TODO: hopefully the same as the x5 but check this*/ #define CONFIG_LCD LCD_VIEW /* Offset ( in the firmware file's header ) to the file CRC and data. These are only used when loading the old format rockbox.e200 file Required for bootloader/common.c to compile */ #define FIRMWARE_OFFSET_FILE_CRC 0x0 #define FIRMWARE_OFFSET_FILE_DATA 0x8 #ifndef BOOTLOADER #define HAVE_MULTIDRIVE #define NUM_DRIVES 2 #define HAVE_HOTSWAP #endif /* USB On-the-go */ /* #define CONFIG_USBOTG USBOTG_ARC */ /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x0781 #define USB_PRODUCT_ID 0x74b1 /* Define this if you have adjustable CPU frequency */ /* #define HAVE_ADJUSTABLE_CPU_FREQ */ #define MI4_FORMAT #define BOOTFILE_EXT "mi4" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define INCLUDE_TIMEOUT_API /** Port-specific settings **/ /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 12 #define DEFAULT_BRIGHTNESS_SETTING 6 /* Default recording levels */ #define DEFAULT_REC_MIC_GAIN 23 #define DEFAULT_REC_LEFT_GAIN 23 #define DEFAULT_REC_RIGHT_GAIN 23 /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY