#define TARGET_TREE /* this target is using the target tree system */ /* * This config file is for iriver H120 and H140 */ #define IRIVER_H100_SERIES 1 #define MODEL_NAME "iriver H120/H140" /* For Rolo and boot loader */ #define MODEL_NUMBER 0 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 160 #define LCD_HEIGHT 128 #define LCD_DEPTH 2 #define LCD_PIXELFORMAT VERTICAL_PACKING /* Display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_DARKCOLOR 0x000000 #define LCD_BRIGHTCOLOR 0x5a915a #define LCD_BL_DARKCOLOR 0x000000 #define LCD_BL_BRIGHTCOLOR 0xadd8e6 /* remote LCD */ #define LCD_REMOTE_WIDTH 128 #define LCD_REMOTE_HEIGHT 64 #define LCD_REMOTE_DEPTH 1 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING /* Remote display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_REMOTE_DARKCOLOR 0x000000 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a #define LCD_REMOTE_BL_DARKCOLOR 0x000000 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa #define CONFIG_KEYPAD IRIVER_H100_PAD #define CONFIG_REMOTE_KEYPAD H100_REMOTE /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this if you have an remote lcd */ #define HAVE_REMOTE_LCD /* Define if we have a hardware defect that causes ticking on the audio line */ #define HAVE_REMOTE_LCD_TICKING #define CONFIG_LCD LCD_S1D15E06 /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* We can fade the backlight by using PWM */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define AB_REPEAT_ENABLE 1 #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 #define HAVE_UDA1380 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \ SRC_CAP_FMRADIO | SRC_CAP_SPDIF) /* define hardware samples rate caps mask */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) #define HAVE_AGC #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Hardware controlled charging */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define current usage levels */ #define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery */ #define CURRENT_BACKLIGHT 23 /* from IriverBattery twiki page */ #define CURRENT_SPDIF_OUT 10 /* optical SPDIF output on */ #define CURRENT_RECORD 105 /* additional current while recording */ #define CURRENT_REMOTE 8 /* additional current when remote connected */ #ifndef SIMULATOR /* Define this if you have a Motorola SCF5249 */ #define CONFIG_CPU MCF5249 /* Define this if you want to use coldfire's i2c interface */ #define CONFIG_I2C I2C_COLDFIRE /* Define this if you can run rockbox from flash memory */ #define HAVE_FLASHED_ROCKBOX /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x200000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 #define HAVE_ATA_LED_CTRL /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "iriver" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define BOOTLOADER_ENTRYPOINT 0x001F0000 #define FLASH_RAMIMAGE_ENTRY 0x00001000 #define FLASH_ROMIMAGE_ENTRY 0x00100000 #define FLASH_MAGIC 0xfbfbfbf2 /* Define this if there is an EEPROM chip */ #define HAVE_EEPROM /* Define this if the EEPROM chip is used */ #define HAVE_EEPROM_SETTINGS #endif /* !SIMULATOR */ /* Define this for S/PDIF output available */ #define HAVE_SPDIF_OUT /* Define this if you can control the S/PDIF power */ #define HAVE_SPDIF_POWER /* Define this if you have a serial port */ /*#define HAVE_SERIAL*/ /** Port-specific settings **/ #define HAVE_LCD_CONTRAST /* Main LCD backlight brightness range and defaults */ #define MIN_CONTRAST_SETTING 14 /* White screen a bit higher than this */ #define MAX_CONTRAST_SETTING 63 /* Black screen a bit lower than this */ #define DEFAULT_CONTRAST_SETTING 27 /* Remote LCD contrast range and defaults */ #define MIN_REMOTE_CONTRAST_SETTING 5 #define MAX_REMOTE_CONTRAST_SETTING 63 #define DEFAULT_REMOTE_CONTRAST_SETTING 42 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */