/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Björn Stenberg * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "system.h" #include "thread.h" #include "kernel.h" #include "string.h" #include "panic.h" /*#define LOGF_ENABLE*/ #include "logf.h" #include "usb.h" #include "usb_ch9.h" #include "usb_drv.h" #include "usb_core.h" #include "usb_class_driver.h" #if defined(USB_ENABLE_STORAGE) #include "usb_storage.h" #endif #if defined(USB_ENABLE_SERIAL) #include "usb_serial.h" #endif #if defined(USB_ENABLE_CHARGING_ONLY) #include "usb_charging_only.h" #endif #ifdef USB_ENABLE_HID #include "usb_hid.h" #endif /* TODO: Move target-specific stuff somewhere else (serial number reading) */ #ifdef HAVE_AS3514 #include "ascodec.h" #include "as3514.h" #endif #if !defined(HAVE_AS3514) && !defined(IPOD_ARCH) && (CONFIG_STORAGE & STORAGE_ATA) #include "ata.h" #endif #if (CONFIG_CPU == IMX233) #include "ocotp-imx233.h" #endif #ifdef SANSA_CONNECT #include "cryptomem-sansaconnect.h" #endif #ifndef USB_MAX_CURRENT #define USB_MAX_CURRENT 500 #endif /*-------------------------------------------------------------------------*/ /* USB protocol descriptors: */ static struct usb_device_descriptor __attribute__((aligned(2))) device_descriptor= { .bLength = sizeof(struct usb_device_descriptor), .bDescriptorType = USB_DT_DEVICE, #ifndef USB_NO_HIGH_SPEED .bcdUSB = 0x0200, #else .bcdUSB = 0x0110, #endif .bDeviceClass = USB_CLASS_PER_INTERFACE, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .bMaxPacketSize0 = 64, .idVendor = USB_VENDOR_ID, .idProduct = USB_PRODUCT_ID, .bcdDevice = 0x0100, .iManufacturer = USB_STRING_INDEX_MANUFACTURER, .iProduct = USB_STRING_INDEX_PRODUCT, .iSerialNumber = USB_STRING_INDEX_SERIAL, .bNumConfigurations = 1 } ; static struct usb_config_descriptor __attribute__((aligned(2))) config_descriptor = { .bLength = sizeof(struct usb_config_descriptor), .bDescriptorType = USB_DT_CONFIG, .wTotalLength = 0, /* will be filled in later */ .bNumInterfaces = 1, .bConfigurationValue = 1, .iConfiguration = 0, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = (USB_MAX_CURRENT + 1) / 2, /* In 2mA units */ }; static const struct usb_qualifier_descriptor __attribute__((aligned(2))) qualifier_descriptor = { .bLength = sizeof(struct usb_qualifier_descriptor), .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = 0x0200, .bDeviceClass = 0, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .bMaxPacketSize0 = 64, .bNumConfigurations = 1 }; static const struct usb_string_descriptor __attribute__((aligned(2))) usb_string_iManufacturer = USB_STRING_INITIALIZER(u"Rockbox.org"); static const struct usb_string_descriptor __attribute__((aligned(2))) usb_string_iProduct = USB_STRING_INITIALIZER(u"Rockbox media player"); static struct usb_string_descriptor __attribute__((aligned(2))) usb_string_iSerial = USB_STRING_INITIALIZER(u"00000000000000000000000000000000000000000"); /* Generic for all targets */ /* this is stringid #0: languages supported */ static const struct usb_string_descriptor __attribute__((aligned(2))) lang_descriptor = USB_STRING_INITIALIZER(u"\x0409"); /* LANGID US English */ static const struct usb_string_descriptor* const usb_strings[USB_STRING_INDEX_MAX] = { [USB_STRING_INDEX_LANGUAGE] = &lang_descriptor, [USB_STRING_INDEX_MANUFACTURER] = &usb_string_iManufacturer, [USB_STRING_INDEX_PRODUCT] = &usb_string_iProduct, [USB_STRING_INDEX_SERIAL] = &usb_string_iSerial, }; static int usb_address = 0; static bool initialized = false; static bool drivers_connected = false; static enum { DEFAULT, ADDRESS, CONFIGURED } usb_state; #ifdef HAVE_USB_CHARGING_ENABLE static int usb_charging_mode = USB_CHARGING_DISABLE; static int usb_charging_current_requested = 500; static struct timeout usb_no_host_timeout; static bool usb_no_host = false; static int usb_no_host_callback(struct timeout *tmo) { (void)tmo; usb_no_host = true; usb_charger_update(); return 0; } #endif static int usb_core_num_interfaces; typedef void (*completion_handler_t)(int ep, int dir, int status, int length); typedef bool (*control_handler_t)(struct usb_ctrlrequest* req, void* reqdata, unsigned char* dest); static struct { completion_handler_t completion_handler[2]; control_handler_t control_handler[2]; struct usb_transfer_completion_event_data completion_event[2]; } ep_data[USB_NUM_ENDPOINTS]; static struct usb_class_driver drivers[USB_NUM_DRIVERS] = { #ifdef USB_ENABLE_STORAGE [USB_DRIVER_MASS_STORAGE] = { .enabled = false, .needs_exclusive_storage = true, .first_interface = 0, .last_interface = 0, .request_endpoints = usb_storage_request_endpoints, .set_first_interface = usb_storage_set_first_interface, .get_config_descriptor = usb_storage_get_config_descriptor, .init_connection = usb_storage_init_connection, .init = usb_storage_init, .disconnect = usb_storage_disconnect, .transfer_complete = usb_storage_transfer_complete, .control_request = usb_storage_control_request, #ifdef HAVE_HOTSWAP .notify_hotswap = usb_storage_notify_hotswap, #endif }, #endif #ifdef USB_ENABLE_SERIAL [USB_DRIVER_SERIAL] = { .enabled = false, .needs_exclusive_storage = false, .first_interface = 0, .last_interface = 0, .request_endpoints = usb_serial_request_endpoints, .set_first_interface = usb_serial_set_first_interface, .get_config_descriptor = usb_serial_get_config_descriptor, .init_connection = usb_serial_init_connection, .init = usb_serial_init, .disconnect = usb_serial_disconnect, .transfer_complete = usb_serial_transfer_complete, .control_request = usb_serial_control_request, #ifdef HAVE_HOTSWAP .notify_hotswap = NULL, #endif }, #endif #ifdef USB_ENABLE_CHARGING_ONLY [USB_DRIVER_CHARGING_ONLY] = { .enabled = false, .needs_exclusive_storage = false, .first_interface = 0, .last_interface = 0, .request_endpoints = usb_charging_only_request_endpoints, .set_first_interface = usb_charging_only_set_first_interface, .get_config_descriptor = usb_charging_only_get_config_descriptor, .init_connection = NULL, .init = NULL, .disconnect = NULL, .transfer_complete = NULL, .control_request = NULL, #ifdef HAVE_HOTSWAP .notify_hotswap = NULL, #endif }, #endif #ifdef USB_ENABLE_HID [USB_DRIVER_HID] = { .enabled = false, .needs_exclusive_storage = false, .first_interface = 0, .last_interface = 0, .request_endpoints = usb_hid_request_endpoints, .set_first_interface = usb_hid_set_first_interface, .get_config_descriptor = usb_hid_get_config_descriptor, .init_connection = usb_hid_init_connection, .init = usb_hid_init, .disconnect = usb_hid_disconnect, .transfer_complete = usb_hid_transfer_complete, .control_request = usb_hid_control_request, #ifdef HAVE_HOTSWAP .notify_hotswap = NULL, #endif }, #endif }; #ifdef USB_LEGACY_CONTROL_API static struct usb_ctrlrequest active_request_buf; static struct usb_ctrlrequest* volatile active_request = NULL; static void* volatile control_write_data = NULL; static volatile bool control_write_data_done = false; #endif static void usb_core_control_request_handler(struct usb_ctrlrequest* req, void* reqdata); static unsigned char response_data[256] USB_DEVBSS_ATTR; /** NOTE Serial Number * The serial number string is split into two parts: * - the first character indicates the set of interfaces enabled * - the other characters form a (hopefully) unique device-specific number * The implementation of set_serial_descriptor should left the first character * of usb_string_iSerial unused, ie never write to * usb_string_iSerial.wString[0] but should take it into account when * computing the length of the descriptor */ static const short hex[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; #ifdef IPOD_ARCH static void set_serial_descriptor(void) { #ifdef IPOD_VIDEO uint32_t* serial = (uint32_t*)0x20004034; #else uint32_t* serial = (uint32_t*)0x20002034; #endif /* We need to convert from a little-endian 64-bit int into a utf-16 string of hex characters */ short* p = &usb_string_iSerial.wString[24]; uint32_t x; int i, j; for(i = 0; i < 2; i++) { x = serial[i]; for(j = 0; j < 8; j++) { *p-- = hex[x & 0xf]; x >>= 4; } } usb_string_iSerial.bLength = 52; } #elif defined(HAVE_AS3514) static void set_serial_descriptor(void) { unsigned char serial[AS3514_UID_LEN]; /* Align 32 digits right in the 40-digit serial number */ short* p = &usb_string_iSerial.wString[1]; int i; ascodec_readbytes(AS3514_UID_0, AS3514_UID_LEN, serial); for(i = 0; i < AS3514_UID_LEN; i++) { *p++ = hex[(serial[i] >> 4) & 0xF]; *p++ = hex[(serial[i] >> 0) & 0xF]; } usb_string_iSerial.bLength = 36 + (2 * AS3514_UID_LEN); } #elif (CONFIG_CPU == IMX233) && IMX233_SUBTARGET >= 3700 // FIXME where is the STMP3600 serial number stored ? static void set_serial_descriptor(void) { short* p = &usb_string_iSerial.wString[1]; for(int i = 0; i < IMX233_NUM_OCOTP_OPS; i++) { uint32_t ops = imx233_ocotp_read(&HW_OCOTP_OPSn(i)); for(int j = 0; j < 8; j++) { *p++ = hex[(ops >> 28) & 0xF]; ops <<= 4; } } usb_string_iSerial.bLength = 2 + 2 * (1 + IMX233_NUM_OCOTP_OPS * 8); } #elif defined(SANSA_CONNECT) static void set_serial_descriptor(void) { char deviceid[32]; short* p = &usb_string_iSerial.wString[1]; int i; if(!cryptomem_read_deviceid(deviceid)) { for(i = 0; i < 32; i++) { *p++ = deviceid[i]; } usb_string_iSerial.bLength = 2 + 2 * (1 + 32); } else { device_descriptor.iSerialNumber = 0; } } #elif (CONFIG_STORAGE & STORAGE_ATA) /* If we don't know the device serial number, use the one * from the disk */ static void set_serial_descriptor(void) { short* p = &usb_string_iSerial.wString[1]; unsigned short* identify = ata_get_identify(); unsigned short x; int i; for(i = 10; i < 20; i++) { x = identify[i]; *p++ = hex[(x >> 12) & 0xF]; *p++ = hex[(x >> 8) & 0xF]; *p++ = hex[(x >> 4) & 0xF]; *p++ = hex[(x >> 0) & 0xF]; } usb_string_iSerial.bLength = 84; } #elif (CONFIG_STORAGE & STORAGE_RAMDISK) /* This "serial number" isn't unique, but it should never actually appear in non-testing use */ static void set_serial_descriptor(void) { short* p = &usb_string_iSerial.wString[1]; int i; for(i = 0; i < 16; i++) { *p++ = hex[(2 * i) & 0xF]; *p++ = hex[(2 * i + 1) & 0xF]; } usb_string_iSerial.bLength = 68; } #else static void set_serial_descriptor(void) { device_descriptor.iSerialNumber = 0; } #endif void usb_core_init(void) { int i; if (initialized) return; usb_drv_init(); /* class driver init functions should be safe to call even if the driver * won't be used. This simplifies other logic (i.e. we don't need to know * yet which drivers will be enabled */ for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].init != NULL) drivers[i].init(); initialized = true; usb_state = DEFAULT; #ifdef HAVE_USB_CHARGING_ENABLE usb_no_host = false; timeout_register(&usb_no_host_timeout, usb_no_host_callback, HZ*10, 0); #endif logf("usb_core_init() finished"); } void usb_core_exit(void) { int i; if(drivers_connected) { for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].disconnect != NULL) { drivers[i].disconnect(); drivers[i].enabled = false; } drivers_connected = false; } if(initialized) { usb_drv_exit(); initialized = false; } usb_state = DEFAULT; #ifdef HAVE_USB_CHARGING_ENABLE usb_no_host = false; usb_charging_maxcurrent_change(usb_charging_maxcurrent()); #endif logf("usb_core_exit() finished"); } void usb_core_handle_transfer_completion( struct usb_transfer_completion_event_data* event) { completion_handler_t handler; int ep = event->endpoint; switch(ep) { case EP_CONTROL: logf("ctrl handled %ld req=0x%x", current_tick, ((struct usb_ctrlrequest*)event->data[0])->bRequest); usb_core_control_request_handler( (struct usb_ctrlrequest*)event->data[0], event->data[1]); break; default: handler = ep_data[ep].completion_handler[EP_DIR(event->dir)]; if(handler != NULL) handler(ep, event->dir, event->status, event->length); break; } } void usb_core_enable_driver(int driver, bool enabled) { drivers[driver].enabled = enabled; } bool usb_core_driver_enabled(int driver) { return drivers[driver].enabled; } bool usb_core_any_exclusive_storage(void) { int i; for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].needs_exclusive_storage) return true; return false; } #ifdef HAVE_HOTSWAP void usb_core_hotswap_event(int volume, bool inserted) { int i; for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].notify_hotswap != NULL) drivers[i].notify_hotswap(volume, inserted); } #endif static void usb_core_set_serial_function_id(void) { int i, id = 0; for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled) id |= 1 << i; usb_string_iSerial.wString[0] = hex[id]; } int usb_core_request_endpoint(int type, int dir, struct usb_class_driver* drv) { int ret, ep; ret = usb_drv_request_endpoint(type, dir); if(ret == -1) return -1; dir = EP_DIR(ret); ep = EP_NUM(ret); ep_data[ep].completion_handler[dir] = drv->transfer_complete; ep_data[ep].control_handler[dir] = drv->control_request; return ret; } void usb_core_release_endpoint(int ep) { int dir; usb_drv_release_endpoint(ep); dir = EP_DIR(ep); ep = EP_NUM(ep); ep_data[ep].completion_handler[dir] = NULL; ep_data[ep].control_handler[dir] = NULL; } static void allocate_interfaces_and_endpoints(void) { int i; int interface = 0; memset(ep_data, 0, sizeof(ep_data)); for(i = 0; i < USB_NUM_ENDPOINTS; i++) { usb_drv_release_endpoint(i | USB_DIR_OUT); usb_drv_release_endpoint(i | USB_DIR_IN); } for(i = 0; i < USB_NUM_DRIVERS; i++) { if(drivers[i].enabled) { drivers[i].first_interface = interface; if(drivers[i].request_endpoints(&drivers[i])) { drivers[i].enabled = false; continue; } interface = drivers[i].set_first_interface(interface); drivers[i].last_interface = interface; } } usb_core_num_interfaces = interface; } static void control_request_handler_drivers(struct usb_ctrlrequest* req, void* reqdata) { int i, interface = req->wIndex & 0xff; bool handled = false; for(i = 0; i < USB_NUM_DRIVERS; i++) { if(drivers[i].enabled && drivers[i].control_request && drivers[i].first_interface <= interface && drivers[i].last_interface > interface) { handled = drivers[i].control_request(req, reqdata, response_data); if(handled) break; } } if(!handled) { /* nope. flag error */ logf("bad req:desc %d:%d", req->bRequest, req->wValue >> 8); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); } } static void request_handler_device_get_descriptor(struct usb_ctrlrequest* req, void* reqdata) { int size; const void* ptr = NULL; int length = req->wLength; int index = req->wValue & 0xff; switch(req->wValue >> 8) { /* type */ case USB_DT_DEVICE: ptr = &device_descriptor; size = sizeof(struct usb_device_descriptor); break; case USB_DT_OTHER_SPEED_CONFIG: case USB_DT_CONFIG: { int i, max_packet_size; if(req->wValue>>8==USB_DT_CONFIG) { max_packet_size = (usb_drv_port_speed() ? 512 : 64); config_descriptor.bDescriptorType = USB_DT_CONFIG; } else { max_packet_size=(usb_drv_port_speed() ? 64 : 512); config_descriptor.bDescriptorType = USB_DT_OTHER_SPEED_CONFIG; } #ifdef HAVE_USB_CHARGING_ENABLE if (usb_charging_mode == USB_CHARGING_DISABLE) { config_descriptor.bMaxPower = (100+1)/2; usb_charging_current_requested = 100; } else { config_descriptor.bMaxPower = (500+1)/2; usb_charging_current_requested = 500; } #endif size = sizeof(struct usb_config_descriptor); for(i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].get_config_descriptor) size += drivers[i].get_config_descriptor( &response_data[size], max_packet_size); config_descriptor.bNumInterfaces = usb_core_num_interfaces; config_descriptor.wTotalLength = (uint16_t)size; memcpy(&response_data[0], &config_descriptor, sizeof(struct usb_config_descriptor)); ptr = response_data; break; } case USB_DT_STRING: logf("STRING %d", index); if((unsigned)index < USB_STRING_INDEX_MAX) { size = usb_strings[index]->bLength; ptr = usb_strings[index]; } else if(index == 0xee) { /* We don't have a real OS descriptor, and we don't handle * STALL correctly on some devices, so we return any valid * string (we arbitrarily pick the manufacturer name) */ size = usb_string_iManufacturer.bLength; ptr = &usb_string_iManufacturer; } else { logf("bad string id %d", index); ptr = NULL; } break; case USB_DT_DEVICE_QUALIFIER: ptr = &qualifier_descriptor; size = sizeof(struct usb_qualifier_descriptor); break; default: logf("ctrl desc."); control_request_handler_drivers(req, reqdata); return; } if(ptr) { logf("data %d (%d)", size, length); length = MIN(size, length); if (ptr != response_data) memcpy(response_data, ptr, length); usb_drv_control_response(USB_CONTROL_ACK, response_data, length); } else { usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); } } static void usb_core_do_set_addr(uint8_t address) { logf("usb_core: SET_ADR %d", address); usb_address = address; usb_state = ADDRESS; } static void usb_core_do_set_config(uint8_t config) { logf("usb_core: SET_CONFIG %d",config); if(config) { usb_state = CONFIGURED; if(drivers_connected) for(int i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].disconnect != NULL) drivers[i].disconnect(); for(int i = 0; i < USB_NUM_DRIVERS; i++) if(drivers[i].enabled && drivers[i].init_connection) drivers[i].init_connection(); drivers_connected = true; } else usb_state = ADDRESS; #ifdef HAVE_USB_CHARGING_ENABLE usb_charging_maxcurrent_change(usb_charging_maxcurrent()); #endif } static void usb_core_do_clear_feature(int recip, int recip_nr, int feature) { logf("usb_core: CLEAR FEATURE (%d,%d,%d)", recip, recip_nr, feature); if(recip == USB_RECIP_ENDPOINT) { if(feature == USB_ENDPOINT_HALT) usb_drv_stall(EP_NUM(recip_nr), false, EP_DIR(recip_nr)); } } static void request_handler_device(struct usb_ctrlrequest* req, void* reqdata) { switch(req->bRequest) { case USB_REQ_GET_CONFIGURATION: logf("usb_core: GET_CONFIG"); response_data[0] = (usb_state == ADDRESS ? 0 : 1); usb_drv_control_response(USB_CONTROL_ACK, response_data, 1); break; case USB_REQ_SET_CONFIGURATION: usb_drv_cancel_all_transfers(); usb_core_do_set_config(req->wValue); usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); break; case USB_REQ_SET_ADDRESS: /* NOTE: We really have no business handling this and drivers * should just handle it themselves. We don't care beyond * knowing if we've been assigned an address yet, or not. */ usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); usb_drv_cancel_all_transfers(); usb_drv_set_address(req->wValue); usb_core_do_set_addr(req->wValue); break; case USB_REQ_GET_DESCRIPTOR: logf("usb_core: GET_DESC %d", req->wValue >> 8); request_handler_device_get_descriptor(req, reqdata); break; case USB_REQ_SET_FEATURE: if(req->wValue==USB_DEVICE_TEST_MODE) { int mode = req->wIndex >> 8; usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); usb_drv_set_test_mode(mode); } else { usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); } break; case USB_REQ_GET_STATUS: response_data[0] = 0; response_data[1] = 0; usb_drv_control_response(USB_CONTROL_ACK, response_data, 2); break; default: logf("bad req:desc %d:%d", req->bRequest, req->wValue); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); break; } } static void request_handler_interface_standard(struct usb_ctrlrequest* req, void* reqdata) { switch (req->bRequest) { case USB_REQ_SET_INTERFACE: logf("usb_core: SET_INTERFACE"); usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); break; case USB_REQ_GET_INTERFACE: logf("usb_core: GET_INTERFACE"); response_data[0] = 0; usb_drv_control_response(USB_CONTROL_ACK, response_data, 1); break; case USB_REQ_GET_STATUS: response_data[0] = 0; response_data[1] = 0; usb_drv_control_response(USB_CONTROL_ACK, response_data, 2); break; case USB_REQ_CLEAR_FEATURE: case USB_REQ_SET_FEATURE: /* TODO: These used to be ignored (erroneously). * Should they be passed to the drivers instead? */ usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); break; default: control_request_handler_drivers(req, reqdata); break; } } static void request_handler_interface(struct usb_ctrlrequest* req, void* reqdata) { switch(req->bRequestType & USB_TYPE_MASK) { case USB_TYPE_STANDARD: request_handler_interface_standard(req, reqdata); break; case USB_TYPE_CLASS: control_request_handler_drivers(req, reqdata); break; case USB_TYPE_VENDOR: default: logf("bad req:desc %d", req->bRequest); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); break; } } static void request_handler_endpoint_drivers(struct usb_ctrlrequest* req, void* reqdata) { bool handled = false; control_handler_t control_handler = NULL; if(EP_NUM(req->wIndex) < USB_NUM_ENDPOINTS) control_handler = ep_data[EP_NUM(req->wIndex)].control_handler[EP_DIR(req->wIndex)]; if(control_handler) handled = control_handler(req, reqdata, response_data); if(!handled) { /* nope. flag error */ logf("usb bad req %d", req->bRequest); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); } } static void request_handler_endpoint_standard(struct usb_ctrlrequest* req, void* reqdata) { switch (req->bRequest) { case USB_REQ_CLEAR_FEATURE: usb_core_do_clear_feature(USB_RECIP_ENDPOINT, req->wIndex, req->wValue); usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); break; case USB_REQ_SET_FEATURE: logf("usb_core: SET FEATURE (%d)", req->wValue); if(req->wValue == USB_ENDPOINT_HALT) usb_drv_stall(EP_NUM(req->wIndex), true, EP_DIR(req->wIndex)); usb_drv_control_response(USB_CONTROL_ACK, NULL, 0); break; case USB_REQ_GET_STATUS: response_data[0] = 0; response_data[1] = 0; logf("usb_core: GET_STATUS"); if(req->wIndex > 0) response_data[0] = usb_drv_stalled(EP_NUM(req->wIndex), EP_DIR(req->wIndex)); usb_drv_control_response(USB_CONTROL_ACK, response_data, 2); break; default: request_handler_endpoint_drivers(req, reqdata); break; } } static void request_handler_endpoint(struct usb_ctrlrequest* req, void* reqdata) { switch(req->bRequestType & USB_TYPE_MASK) { case USB_TYPE_STANDARD: request_handler_endpoint_standard(req, reqdata); break; case USB_TYPE_CLASS: request_handler_endpoint_drivers(req, reqdata); break; case USB_TYPE_VENDOR: default: logf("bad req:desc %d", req->bRequest); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); break; } } /* Handling USB requests starts here */ static void usb_core_control_request_handler(struct usb_ctrlrequest* req, void* reqdata) { #ifdef HAVE_USB_CHARGING_ENABLE timeout_cancel(&usb_no_host_timeout); if(usb_no_host) { usb_no_host = false; usb_charging_maxcurrent_change(usb_charging_maxcurrent()); } #endif if(usb_state == DEFAULT) { set_serial_descriptor(); usb_core_set_serial_function_id(); allocate_interfaces_and_endpoints(); } switch(req->bRequestType & USB_RECIP_MASK) { case USB_RECIP_DEVICE: request_handler_device(req, reqdata); break; case USB_RECIP_INTERFACE: request_handler_interface(req, reqdata); break; case USB_RECIP_ENDPOINT: request_handler_endpoint(req, reqdata); break; default: logf("unsupported recipient"); usb_drv_control_response(USB_CONTROL_STALL, NULL, 0); break; } } /* called by usb_drv_int() */ void usb_core_bus_reset(void) { logf("usb_core: bus reset"); usb_address = 0; usb_state = DEFAULT; #ifdef HAVE_USB_CHARGING_ENABLE #ifdef HAVE_USB_CHARGING_IN_THREAD /* On some targets usb_charging_maxcurrent_change() cannot be called * from an interrupt handler; get the USB thread to do it instead. */ usb_charger_update(); #else usb_charging_maxcurrent_change(usb_charging_maxcurrent()); #endif #endif } /* called by usb_drv_transfer_completed() */ void usb_core_transfer_complete(int endpoint, int dir, int status, int length) { struct usb_transfer_completion_event_data* completion_event = &ep_data[endpoint].completion_event[EP_DIR(dir)]; completion_event->endpoint = endpoint; completion_event->dir = dir; completion_event->data[0] = NULL; completion_event->data[1] = NULL; completion_event->status = status; completion_event->length = length; #ifdef USB_LEGACY_CONTROL_API if(endpoint == EP_CONTROL) { bool cwdd = control_write_data_done; struct usb_ctrlrequest* req = active_request; if(dir == USB_DIR_OUT && req && cwdd) { completion_event->data[0] = req; completion_event->data[1] = control_write_data; } else { return; } } #endif usb_signal_transfer_completion(completion_event); } void usb_core_handle_notify(long id, intptr_t data) { switch(id) { case USB_NOTIFY_SET_ADDR: usb_core_do_set_addr(data); break; case USB_NOTIFY_SET_CONFIG: usb_core_do_set_config(data); break; default: break; } } void usb_core_control_request(struct usb_ctrlrequest* req, void* reqdata) { struct usb_transfer_completion_event_data* completion_event = &ep_data[EP_CONTROL].completion_event[EP_DIR(USB_DIR_IN)]; completion_event->endpoint = EP_CONTROL; completion_event->dir = 0; completion_event->data[0] = (void*)req; completion_event->data[1] = reqdata; completion_event->status = 0; completion_event->length = 0; logf("ctrl received %ld, req=0x%x", current_tick, req->bRequest); usb_signal_transfer_completion(completion_event); } void usb_core_control_complete(int status) { /* We currently don't use this, it's here to make the API look good ;) * It makes sense to #define it away on normal builds. */ (void)status; logf("ctrl complete %ld, %d", current_tick, status); } #ifdef USB_LEGACY_CONTROL_API /* Only needed if the driver does not support the new API yet */ void usb_core_legacy_control_request(struct usb_ctrlrequest* req) { memcpy(&active_request_buf, req, sizeof(*req)); active_request = &active_request_buf; control_write_data = NULL; control_write_data_done = false; usb_core_control_request(req, NULL); } void usb_drv_control_response(enum usb_control_response resp, void* data, int length) { struct usb_ctrlrequest* req = active_request; if(!req) panicf("null ctrl req"); if(req->wLength == 0) { active_request = NULL; /* No-data request */ if(resp == USB_CONTROL_ACK) usb_drv_send(EP_CONTROL, data, length); else if(resp == USB_CONTROL_STALL) usb_drv_stall(EP_CONTROL, true, true); else panicf("RECEIVE on non-data req"); } else if(req->bRequestType & USB_DIR_IN) { /* Control read request */ if(resp == USB_CONTROL_ACK) { active_request = NULL; usb_drv_recv_nonblocking(EP_CONTROL, NULL, 0); usb_drv_send(EP_CONTROL, data, length); } else if(resp == USB_CONTROL_STALL) { active_request = NULL; usb_drv_stall(EP_CONTROL, true, true); } else { panicf("RECEIVE on ctrl read req"); } } else if(!control_write_data_done) { /* Control write request, data phase */ if(resp == USB_CONTROL_RECEIVE) { control_write_data = data; control_write_data_done = true; usb_drv_recv_nonblocking(EP_CONTROL, data, length); } else if(resp == USB_CONTROL_STALL) { /* We should stall the OUT endpoint here, but the old code did * not do so and some drivers may not handle it correctly. */ active_request = NULL; usb_drv_stall(EP_CONTROL, true, true); } else { panicf("ACK on ctrl write data"); } } else { active_request = NULL; control_write_data = NULL; control_write_data_done = false; /* Control write request, status phase */ if(resp == USB_CONTROL_ACK) usb_drv_send(EP_CONTROL, NULL, 0); else if(resp == USB_CONTROL_STALL) usb_drv_stall(EP_CONTROL, true, true); else panicf("RECEIVE on ctrl write status"); } } #endif void usb_core_notify_set_address(uint8_t addr) { logf("notify set addr received %ld", current_tick); usb_signal_notify(USB_NOTIFY_SET_ADDR, addr); } void usb_core_notify_set_config(uint8_t config) { logf("notify set config received %ld", current_tick); usb_signal_notify(USB_NOTIFY_SET_CONFIG, config); } #ifdef HAVE_USB_CHARGING_ENABLE void usb_charging_enable(int state) { usb_charging_mode = state; usb_charging_maxcurrent_change(usb_charging_maxcurrent()); } int usb_charging_maxcurrent() { if (!initialized || usb_charging_mode == USB_CHARGING_DISABLE) return 100; if (usb_state == CONFIGURED) return usb_charging_current_requested; if (usb_charging_mode == USB_CHARGING_FORCE && usb_no_host) return 500; return 100; } #endif