/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Rafaël Carré * * Based on Rockbox iriver bootloader by Linus Nielsen Feltzing * and the ipodlinux bootloader by Daniel Palffy and Bernard Leach * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include #include #include "config.h" #include "gcc_extensions.h" #include "lcd.h" #ifdef USE_ROCKBOX_USB #include "usb.h" #include "sysfont.h" #endif /* USE_ROCKBOX_USB */ #include "backlight.h" #include "button-target.h" #include "common.h" #include "storage.h" #include "disk.h" #include "panic.h" #include "power.h" int show_logo(void); #ifdef USE_ROCKBOX_USB static void usb_mode(void) { if(usb_detect() != USB_INSERTED) { static const char msg[] = "Plug USB cable"; reset_screen(); lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * sizeof(msg))) / 2, (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg); lcd_update(); /* wait until USB is plugged */ while(usb_detect() != USB_INSERTED) ; } static const char msg[] = "Bootloader USB mode"; reset_screen(); lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * sizeof(msg))) / 2, (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg); lcd_update(); while(usb_detect() == USB_INSERTED) sleep(HZ); reset_screen(); lcd_update(); } #endif /* USE_ROCKBOX_USB */ void main(void) NORETURN_ATTR; void main(void) { unsigned char* loadbuffer; int buffer_size; void(*kernel_entry)(void); int ret; system_init(); kernel_init(); enable_irq(); lcd_init(); show_logo(); backlight_init(); button_init_device(); int btn = button_read_device(); #if !defined(SANSA_FUZE) && !defined(SANSA_CLIP) && !defined(SANSA_CLIPV2) \ && !defined(SANSA_CLIPPLUS) && !defined(SANSA_CLIPZIP) if (button_hold()) { verbose = true; lcd_clear_display(); printf("Hold switch on"); printf("Shutting down..."); sleep(HZ); power_off(); } #endif /* Enable bootloader messages if any button is pressed */ if (btn) { lcd_clear_display(); verbose = true; } ret = storage_init(); if(ret < 0) error(EATA, ret, true); #ifdef USE_ROCKBOX_USB usb_init(); usb_start_monitoring(); /* Enter USB mode if USB is plugged and SELECT button is pressed */ if(btn & BUTTON_SELECT && usb_detect() == USB_INSERTED) usb_mode(); #endif /* USE_ROCKBOX_USB */ while(!disk_init(IF_MV(0))) #ifdef USE_ROCKBOX_USB usb_mode(); #else panicf("disk_init failed!"); #endif while((ret = disk_mount_all()) <= 0) { #ifdef USE_ROCKBOX_USB error(EDISK, ret, false); usb_mode(); #else error(EDISK, ret, true); #endif } printf("Loading firmware"); loadbuffer = (unsigned char*)DRAM_ORIG; /* DRAM */ buffer_size = (int)(loadbuffer + (DRAM_SIZE) - TTB_SIZE); while((ret = load_firmware(loadbuffer, BOOTFILE, buffer_size)) < 0) { #ifdef USE_ROCKBOX_USB error(EBOOTFILE, ret, false); usb_mode(); #else error(EBOOTFILE, ret, true); #endif } kernel_entry = (void*) loadbuffer; cpucache_invalidate(); printf("Executing"); kernel_entry(); printf("ERR: Failed to boot"); /* never returns */ while(1) ; }