% $Id$ % \chapter{\label{ref:rockbox_interface}The Rockbox interface} \section{Your \dap} \begin{center} \opt{player}{\includegraphics[height=11.8cm]{rockbox_interface/images/player-front.png}} \opt{recorder,recorderv2fm}{\includegraphics[height=11.8cm]{rockbox_interface/images/recorderv2fm-front.png}} \opt{ondiosp}{\includegraphics[height=11.8cm]{rockbox_interface/images/ondiosp-front.png}} \opt{ondiofm}{\includegraphics[height=11.8cm]{rockbox_interface/images/ondiofm-front.png}} \opt{h1xx}{\includegraphics[height=11.8cm]{rockbox_interface/images/h1xx-front.png}} \opt{h300}{\includegraphics[height=11.8cm]{rockbox_interface/images/h300-front.jpg}} \end{center} Throughout this manual, the buttons on the \dap\ are labelled according to the picture above. \subsection{The \daps{} controls} \blind{ % \opt{h1xx}{ If you lay the \dap\ on the table with the joystick pointing towards you, and the curved sides at the top, you will find the following if you start from the top-right corner and follow the side of the \dap: \ButtonOn, \ButtonOff, \ButtonMode, USB port, a small hole for resetting the \dap, charger plug, \ButtonRec, headphone minijack plug, remote port, optical/line in, optical/line out. The joystick in the middle of the \dap\ is used to navigate menus by pressing it up, down, left and right. Pressing the joystick down is labelled \ButtonSelect\ throughout this manual. } % \opt{h300}{ Hold the lay the \dap\ so that the side with the button pad and LCD is facing towards you. The buttons on the button pad are as follows: top left corner: \ButtonOn, bottom left corner: \ButtonOff, top right corner: \ButtonRec, bottom right corner: \ButtonMode. In the center of the button pad is a button labelled \ButtonSelect. Surrounding the \ButtonSelect\ button are four directional buttons used to navigate up, down, left and right. On the top panel of the \dap, from left to right, you can find the following: headphone minijack plug, remote port, Line-in, Line-out. On the bottom panel of the \dap, from left to right, you can find the following: power jack and two USB ports. The USB port on the right is used to connect your \dap\ to your computer. The USB port on the left is not used in Rockbox. } % \opt{ipod4g,ipodcolor,ipodvideo,ipodmini} { The main controls on the \dap\ are a slightly indented scroll wheel with a flat round button in the center. Hold the \dap\ with these controls facing you. The top of the player will have the following, from left to right: \opt{ipod4g,ipodcolor}{remote connector, headphone jack, hold switch.} \opt{ipodvideo}{hold switch, headphone jack.} \opt{ipodmini}{hold switch, remote connector, headphone jack.} The dock connector that is used to connect your \dap\ to your computer is on the bottom panel of the \dap. The button in the middle of the wheel is called \ButtonSelect. You can operate the wheel by pressing the top, bottom, left or right sections, or by sliding your finger around it. The top is \ButtonMenu, the bottom is \ButtonPlay, the left is \ButtonLeft, and the right is \ButtonRight. When the manual says to \ButtonScrollFwd, it means to slide your finger clockwise around the wheel. \ButtonScrollBack\ means to slide your finger counterclockwise. Note that the wheel is sensitive, so you will need to move slowly at first and get a feel for how it works. Note that when the hold switch is pushed toward the center of the \dap, ``hold'' is on, and none of the other controls do anything. Be sure ``hold'' is off before trying to use your player. } % \opt{ipodnano}{ The main controls on the \dap\ are a slightly indented wheel with a flat round button in the center. Hold the \dap\ with these controls on the top surface. There is a Hold switch at one end, and headphone and USB jacks at the other; be sure the end with the switch is facing away from you. The button in the middle of the wheel is called \ButtonSelect\. You can operate the wheel by pressing the top, bottom, left or right sections, or by sliding your finger around it. The top is \ButtonMenu\, the bottom is \ButtonPlay\, the left is \ButtonLeft\, and the right is \ButtonRight\. When the manual says to \ButtonScrollFwd\, it means to slide your finger clockwise around the wheel. \ButtonScrollBack\ means to slide your finger counterclockwise. Note that the wheel is sensitive, so you will need to move slowly at first and get a feel for how it works. Note that when the Hold switch is pushed toward the center of the \dap\, Hold is on, and none of the other controls do anything; be sure Hold is off before trying to use your player. } % \nopt{h1xx,h300,ipodnano,ipodvideo,ipodmini,ipod4g,ipodcolor} { \fixme{Write a section describing the \dap\ for blind users.} } } \subsection{Turning the \dap\ on and off} To turn on and shut down your \dap, the following keys are used: \begin{table} \begin{btnmap}{}{} \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn} \opt{IPOD_4G_PAD}{\ButtonMenu\ or \ButtonSelect} \opt{ONDIO_PAD}{\ButtonOff}\opt{RECORDER_PAD,PLAYER_PAD} {Hold \ButtonOn\ for 2{}-3s} \opt{IAUDIO_X5_PAD}{\ButtonPower} & Start Rockbox\\ \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{Hold \ButtonOff} \opt{IPOD_4G_PAD}{Hold \ButtonPlay} \opt{ONDIO_PAD,recorderv2fm}{Hold \ButtonOff} \opt{recorder}{Double tap \ButtonOff\ when playback is stopped} \opt{PLAYER_PAD}{From the Main Menu, select \textbf{Shutdown}} \opt{IAUDIO_X5_PAD}{Hold \ButtonPower} & Shutdown Rockbox\\ \end{btnmap} \end{table} \label{ref:Safeshutdown}On shutdown, Rockbox automatically saves its settings. \opt{PLAYER_PAD,RECORDER_PAD,ONDIO_PAD}{ In the unlikely event of a software failure, a hardware power off can be performed by holding down \opt{PLAYER_PAD}{\ButtonStop} \opt{RECORDER_PAD,ONDIO_PAD}{\ButtonOff} until the \nopt{ondiosp,ondiofm}{\dap\ power light} \opt{ondiosp,ondiofm}{\daps\ display} goes off. } \section{\label{ref:file_browser}File Browser} \screenshot{rockbox_interface/images/ss-file-browser}{The file browser}{} Rockbox lets you browse your music in either of two ways. The \setting{File Browser} lets you navigate through the files and folders on your \dap, entering folders and executing the default action on each file. To help differentiate files, each file format is displayed with an icon. The \setting{Tag Cache Browser}, on the other hand, allows you to navigate through the music on your player using categories like album, artist, genre, etc. You can select whether to browse using the \setting{File Browser} or the \setting{Tag Cache Browser} by adjusting the \setting{Show Files} setting. If you choose the \setting{File Browser}, the \setting{Show Files} setting also lets you select what types of files you wish to view. See \reference{ref:ShowFiles} for more information on the \setting{Show Files} setting. \note{The \setting{File Browser} allows you to manipulate your files in ways that are not available within the \setting{Tag Cache Browser}. Read more about \setting{Tag Cache} in \reference{ref:tagcache}. The remainder of this section deals with the \setting{File Browser}.} \opt{ondio}{\fixme{Add information on hotplug/multivolume support}} \subsection{\label{ref:controls}File Browser Controls} \begin{table} \begin{btnmap}{}{} \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,ONDIO_PAD,RECORDER_PAD,IAUDIO_X5_PAD} {\ButtonUp/\ButtonDown} \opt{PLAYER_PAD}{\ButtonLeft/\ButtonRight} \opt{IPOD_4G_PAD}{\ButtonScrollBack/\ButtonScrollFwd} & Go to previous/next item in list. If you are on the first/last entry, the cursor will wrap to the last/first entry.\\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,RECORDER_PAD} {\ButtonOn+\ButtonUp/\ButtonDown} \opt{PLAYER_PAD,IPOD_4G_PAD,IAUDIO_X5_PAD}{n/a} \opt{ONDIO_PAD}{n/a} & Move one page up/down on the list.\\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,RECORDER_PAD,IAUDIO_X5_PAD,ONDIO_PAD,IPOD_4G_PAD}{\ButtonLeft} \opt{PLAYER_PAD}{\ButtonStop} & Go to the parent directory. \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,IPOD_4G_PAD} {\ButtonRight/\ButtonSelect} \opt{PLAYER_PAD}{\ButtonPlay} \opt{ONDIO_PAD}{\ButtonRight} \opt{RECORDER_PAD}{\ButtonRight/\ButtonPlay} & Executes an action. Depending on the file type, that action may vary. (See \reference{ref:Filemenu}) \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,PLAYER_PAD,RECORDER_PAD}{\ButtonOn} \opt{IAUDIO_X5_PAD,IPOD_4G_PAD}{\ButtonPlay} \opt{ONDIO_PAD}{Short press on \ButtonMenu} & If there is a MP3 playing, returns to the While Playing Screen (WPS) without stopping playback. \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,IPOD_4G_PAD} {Hold \ButtonSelect} \opt{RECORDER_PAD,PLAYER_PAD}{Hold \ButtonPlay/\ButtonOn+\ButtonPlay} \opt{ONDIO_PAD}{Hold \ButtonRight} & Enter the File Menu\\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonMode} \opt{RECORDER_PAD}{\ButtonFOne} \opt{PLAYER_PAD,IPOD_4G_PAD,ONDIO_PAD,IPOD_VIDEO_PAD}{\ButtonMenu} \opt{IAUDIO_X5_PAD}{Press \ButtonRec} & Enter the Main Menu \\ % \opt{RECORDER_PAD}{ \ButtonFTwo & Switches to the Browse/Play Quick Menu \\ % \ButtonFThree & Switches to the Display Quick Menu \\ % } \end{btnmap} \end{table} \opt{RECORDER_PAD}{ The functions of the F keys are also summarised on the button bar at the bottom of the screen. } \subsection{\label{ref:Filemenu}\label{ref:PartIISectionFM}File Menu} \screenshot{rockbox_interface/images/ss-file-menu}{The File Menu}{} The \setting{File Menu} allows you to perform certain operations on files or folders. To access the \setting{File Menu}, position the selector over a file or folder and \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,IPOD_4G_PAD} {hold the \ButtonSelect\ button.} \opt{RECORDER_PAD,PLAYER_PAD}{press the \ButtonPlay/\ButtonOn+\ButtonPlay\ buttons.} \opt{ONDIO_PAD}{hold the \ButtonRight\ button.} \note{The \setting{File Menu} is a context sensitive menu. If the \setting{File Menu} is invoked on a file, it will display options available for files. If the \setting{File Menu} is invoked on a folder or directory, it will display options for directories.} The \setting{File Menu} contains the following options (unless otherwise noted, each option pertains both to files and directories): \begin{description} \item [Playlist:] Enters the \setting{Playlist Submenu} (see below). \item [Rename:] This function lets the user modify a file name. \item [Cut:] Copies the name of the currently selected file or directory to the clipboard and marks it to be 'cut'. \item [Copy:] Copies the name of the currently selected file or directory to the clipboard and marks it to be 'copied'. \item [Paste:] Only visible if a file or directory name is on the clipboard. When selected it will move or copy the clipboard to the current directory. \item [Delete:] Deletes the currently selected file. This option applies only to files, and not to directories. Rockbox will ask for confirmation before deleting a file. Press \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,IPOD_4G_PAD,IPOD_VIDEO_PAD} {\ButtonSelect} \opt{PLAYER_PAD,RECORDER_PAD}{\ButtonPlay} \opt{ONDIO_PAD}{\ButtonRight} to confirm deletion or any other key to cancel. \item [Delete Directory:] Deletes the currently selected directory and all of the files and folders contained in the selected directory. Deleted directories cannot be recovered. Use this feature with caution! \item [Open with:] Runs a viewer plugin on the file. Normally, when a file is selected in Rockbox, Rockbox automatically detects the file type and runs the appropriate plugin. The \setting{Open With} function can be used to override the default action and select a viewer by hand. For example, this function can be used to view a text file even if the file has a non-standard extension (i.e., the file has an extension of something other than \fname{.txt}). See \reference{ref:Viewersplugins} for more details on viewers. \item [Create Directory:] Makes a new folder in the current folder on the disk. \end{description} \subsection{\label{ref:Playlistsubmenu}Playlist Submenu} \screenshot{rockbox_interface/images/ss-playlist-menu}{The Playlist Submenu}{} The \setting{Playlist Submenu} allows you to put tracks into a ``dynamic playlist''. If there is no music currently playing, Rockbox will create a new dynamic playlist and put the selected track(s) into the playlist. If there is music currently playing, Rockbox will put the selected track(s) into the current playlist. The place in which the newly selected tracks are added to the playlist is determined by the following options: \begin{description} \item [Insert:] Add track(s) to playlist. If no other tracks have been inserted then the selected track will be added immediately after current playing track, otherwise they will be added to end of insertion list. \item [Insert next:] Add track(s) immediately after current playing track, no matter what else has been inserted. \item [Insert last:] Add track(s) to end of playlist. \item [Queue:] Queue is the same as Insert except queued tracks are deleted immediately from the playlist after they've been played. Also, queued tracks are not saved to the playlist file (see \reference{ref:playlistoptions}). \item [Queue next:] Queue track(s) immediately after current playing track. \item [Queue last:] Queue track(s) at end of playlist. \end{description} The \setting{Playlist Submenu} can be used to add either single tracks or entire directories to a playlist. If the \setting{Playlist Submenu} is invoked on a single track, it will put only that track into the playlist. On the other hand, if the \setting{Playlist Submenu} is invoked on a directory, Rockbox adds all of the tracks in that directory to the playlist. \note{You can control whether or not Rockbox includes the contents of subdirectories when adding an entire directory to a playlists. Set the \setting{Main Menu $\rightarrow$ Playlist Options $\rightarrow$ Recusively Insert Directories} setting to \setting{Yes} if you would like Rockbox to include tracks in subdirectories as well as tracks in the currently-selected directory.} If you want to have Rockbox create a playlist of a whole folder (to play an entire album, for example), use the \setting{File Browser} to select the song. When a single song is selected from the \setting{File Browser}, Rockbox will automatically create a playlist with all songs in the current folder. However, if you want to play only a single song and then stop, stop playback, navigate to the song you want to play, and use the \setting{Playlist $\rightarrow$ Insert} function to select the song. Dynamic playlists are saved so resume will restore them exactly as they were before shutdown. \note{To view, save or reshuffle the current dynamic playlist, use the \setting{Playlist Options} setting in the WPS Context Menu.} \subsection{Virtual Keyboard} \screenshot{rockbox_interface/images/ss-virtual-keyboard}{The virtual keyboard}{} This is the virtual keyboard that is used when entering file names in Rockbox. \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,RECORDER_PAD}{ \begin{table} \begin{btnmap}{}{} \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,RECORDER_PAD} {\ButtonUp/\ButtonDown/\ButtonLeft/\ButtonRight} & Move about the virtual keyboard (moves the solid cursor) \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,RECORDER_PAD} {\ButtonOn+\ButtonLeft/\ButtonRight} \opt{IAUDIO_X5_PAD}{Please add correct keys} & Move about within the current file name (moves the line cursor) \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonSelect} \opt{RECORDER_PAD}{\ButtonPlay} \opt{IAUDIO_X5_PAD}{Please add correct keys} & Inserts the currently selected keyboard letter at the current filename cursor position \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,RECORDER_PAD}{\ButtonOff} \opt{IAUDIO_X5_PAD}{Please add correct keys} & Exits the virtual keyboard without saving any changes \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{n/a} \opt{RECORDER_PAD}{\ButtonFOne} & SHIFT: Shifts between the upper case, lower case and accented keyboards \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn} \opt{RECORDER_PAD}{\ButtonFTwo} \opt{IAUDIO_X5_PAD}{Please add correct keys} & OK: Exits the virtual keyboard and saves any changes \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonRec} \opt{RECORDER_PAD}{\ButtonFThree} \opt{IAUDIO_X5_PAD}{Please add correct keys} & DEL: Deletes the character before the current filename cursor \\ % \opt{SWCODEC}{ \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn+\ButtonMode} \opt{IAUDIO_X5_PAD}{Please add correct keys} & Enters Morse input mode\\ } \end{btnmap} \end{table} } \opt{IPOD_4G_PAD}{ \textbf{Picker area} \begin{table} \begin{btnmap}{}{} \ButtonScrollFwd/\ButtonScrollBack & Move about the virtual keyboard \\ \ButtonLeft/\ButtonRight & (moves the solid cursor). If you move out of the picker area with \ButtonScrollFwd/\ButtonScrollBack, you get to the line edit mode. \\ \ButtonSelect & Inserts the currently selected keyboard letter at the current filename cursor position \\ Hold \ButtonSelect & OK: Exits the virtual keyboard and saves any changes \\ \ButtonMenu & Exits the virtual keyboard without saving any changes\\ \end{btnmap} \end{table} \textbf{Line edit mode} \begin{table} \begin{btnmap}{}{} \ButtonLeft/\ButtonRight & Move left and right\\ \ButtonSelect & Deletes the letter to the left of the cursor\\ \ButtonScrollFwd/\ButtonScrollBack & Returns to the picker area\\ \end{btnmap} \end{table} } \opt{ondio}{ \textbf{Picker area} \begin{table} \begin{btnmap}{}{} \ButtonUp/\ButtonDown/\ButtonLeft/\ButtonRight & Move about the virtual keyboard (moves the solid cursor). If you move out of the picker area with \ButtonUp/\ButtonDown, you get to the line edit mode. \\ \ButtonMenu & Selects the letter underneath the cursor. \\ Long press on \ButtonMenu & Accepts the currently selected letter\\ \ButtonOff & Aborts the currently selected letter\\ \end{btnmap} \end{table} \textbf{Line edit mode} \begin{table} \begin{btnmap}{}{} \ButtonLeft/\ButtonRight & Move left and right\\ \ButtonMenu & Deletes the letter to the left of the cursor\\ Long press on \ButtonMenu & Accepts the deletion\\ \ButtonUp/\ButtonDown & Returns to the picker area\\ \end{btnmap} \end{table} }\opt{player}{ The current filename is always listed on the first line of the display. The second line of the display can contain the character selection bar, as in the screenshot above, or one of a number of other options. \begin{table} \begin{btnmap}{}{} \ButtonLeft/\ButtonRight & Moves the arrow to/from the filename \\ & and changes between the character bar \\ & and BACKSPACE, DELETE, ACCEPT and ABORT. \\ \ButtonPlay/\ButtonStop & Varies (see below) \\ \ButtonMenu & Shift. When the character selection bar is selected\\ & this changes between upper case, lower case, \\ & and accented letters. \\ \end{btnmap} \end{table} The function of the \ButtonPlay\ and \ButtonStop\ buttons depends on what the arrow is pointing to, as follows. \begin{table} \begin{center} \begin{tabularx}{.75\textwidth}{lX} \textbf{Selected option} & \textbf{Play/Stop function} \\\midrule filename & Moves the cursor left (\ButtonStop) \\ & or right (\ButtonPlay) within the filename \\ character bar & Moves the character bar to the next (\ButtonPlay)\\ & or previous (\ButtonStop) character. \\ BACKSPACE & \ButtonPlay deletes the character before \\ & the current cursor position \\ DELETE & \ButtonPlay deletes the character at the \\ & current cursor position\\ ACCEPT & \ButtonPlay exits the virtual keyboard and \\ & saves any changes \\ ABORT & \ButtonPlay exits the virtual keyboard and \\ & discards any changes \\\bottomrule \end{tabularx} \end{center} \end{table} } \input{rockbox_interface/tagcache.tex} \input{rockbox_interface/wps.tex}