/* * This config file is for the Philips GoGear HDD63x0 */ #define TARGET_TREE /* this target is using the target tree system */ /* For Rolo and boot loader */ #define MODEL_NUMBER 65 #define MODEL_NAME "Philips GoGear HDD63x0" /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 220 #define LCD_HEIGHT 176 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */ #ifndef BOOTLOADER /* Define this if your LCD can be enabled/disabled */ /* #define HAVE_LCD_ENABLE */ /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE * should be defined as well. * We can currently put the lcd to sleep but it won't wake up properly */ /* #define HAVE_LCD_SLEEP */ /* #define HAVE_LCD_SLEEP_SETTING */ #endif /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ #define CONFIG_KEYPAD PHILIPS_HDD6330_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC, but it's register compatible with the E8564. */ #ifndef BOOTLOADER #define CONFIG_RTC RTC_E8564 #define HAVE_RTC_ALARM #endif /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8731 audio codec */ #define HAVE_WM8731 /* WM8731 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS /* TODO: #define AB_REPEAT_ENABLE */ /* FM Tuner */ #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING */ /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 16 #define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */ /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT #define HAVE_BUTTONLIGHT_BRIGHTNESS /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION #define BATTERY_CAPACITY_DEFAULT 840 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 800 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 20 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Hardware controlled charging */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5022 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 75000000 /* Type of LCD */ #define CONFIG_LCD LCD_HDD6330 /* Define this if your LCD can set contrast */ /* #define HAVE_LCD_CONTRAST */ #define MIN_CONTRAST_SETTING 0 #define MAX_CONTRAST_SETTING 127 #define DEFAULT_CONTRAST_SETTING 63 /* Match boot contrast */ /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* Offset ( in the firmware file's header ) to the file CRC and data. These are only used when loading the old format rockbox.e200 file */ #define FIRMWARE_OFFSET_FILE_CRC 0x0 #define FIRMWARE_OFFSET_FILE_DATA 0x8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x0471 #define USB_PRODUCT_ID 0x014B #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define MI4_FORMAT #define BOOTFILE_EXT "mi4" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ /* TODO: it does not work - it hangs the player */ /* #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY