/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Michael Sevakis * * Driver for WM8978 audio codec * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "system.h" #include "audiohw.h" #include "wmcodec.h" #include "audio.h" /*#define LOGF_ENABLE*/ #include "logf.h" #include "sound.h" /* TODO: Define/refine an API for special hardware steps outside the * main codec driver such as special GPIO handling. */ /* NOTE: Much of the volume code is very interdependent and calibrated for * the Gigabeat S. If you change anything for another device that uses this * file it may break things. */ extern void audiohw_enable_headphone_jack(bool enable); const struct sound_settings_info audiohw_settings[] = { [SOUND_VOLUME] = {"dB", 0, 1, -90, 6, -25}, [SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0}, [SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0}, [SOUND_STEREO_WIDTH] = {"%", 0, 5, 0, 250, 100}, [SOUND_EQ_BAND1_GAIN] = {"dB", 0, 1, -12, 12, 0}, [SOUND_EQ_BAND2_GAIN] = {"dB", 0, 1, -12, 12, 0}, [SOUND_EQ_BAND3_GAIN] = {"dB", 0, 1, -12, 12, 0}, [SOUND_EQ_BAND4_GAIN] = {"dB", 0, 1, -12, 12, 0}, [SOUND_EQ_BAND5_GAIN] = {"dB", 0, 1, -12, 12, 0}, [SOUND_EQ_BAND1_FREQUENCY] = {"", 0, 1, 0, 3, 0}, [SOUND_EQ_BAND2_FREQUENCY] = {"", 0, 1, 0, 3, 0}, [SOUND_EQ_BAND3_FREQUENCY] = {"", 0, 1, 0, 3, 0}, [SOUND_EQ_BAND4_FREQUENCY] = {"", 0, 1, 0, 3, 0}, [SOUND_EQ_BAND5_FREQUENCY] = {"", 0, 1, 0, 3, 0}, [SOUND_EQ_BAND2_WIDTH] = {"", 0, 1, 0, 1, 0}, [SOUND_EQ_BAND3_WIDTH] = {"", 0, 1, 0, 1, 0}, [SOUND_EQ_BAND4_WIDTH] = {"", 0, 1, 0, 1, 0}, [SOUND_DEPTH_3D] = {"%", 0, 1, 0, 15, 0}, #ifdef HAVE_RECORDING /* Digital: -119.0dB to +8.0dB in 0.5dB increments * Analog: Relegated to volume control * Circumstances unfortunately do not allow a great deal of positive * gain. */ [SOUND_LEFT_GAIN] = {"dB", 1, 1,-238, 16, 0}, [SOUND_RIGHT_GAIN] = {"dB", 1, 1,-238, 16, 0}, #if 0 [SOUND_MIC_GAIN] = {"dB", 1, 1,-238, 16, 0}, #endif #endif }; static uint16_t wmc_regs[WMC_NUM_REGISTERS] = { /* Initialized with post-reset default values - the 2-wire interface * cannot be read. Or-in additional bits desired for some registers. */ [0 ... WMC_NUM_REGISTERS-1] = 0x8000, /* To ID invalids in gaps */ [WMC_SOFTWARE_RESET] = 0x000, [WMC_POWER_MANAGEMENT1] = 0x000, [WMC_POWER_MANAGEMENT2] = 0x000, [WMC_POWER_MANAGEMENT3] = 0x000, [WMC_AUDIO_INTERFACE] = 0x050, [WMC_COMPANDING_CTRL] = 0x000, [WMC_CLOCK_GEN_CTRL] = 0x140, [WMC_ADDITIONAL_CTRL] = 0x000, [WMC_GPIO] = 0x000, [WMC_JACK_DETECT_CONTROL1] = 0x000, [WMC_DAC_CONTROL] = 0x000, [WMC_LEFT_DAC_DIGITAL_VOL] = 0x0ff, /* Latch left first */ [WMC_RIGHT_DAC_DIGITAL_VOL] = 0x0ff | WMC_VU, [WMC_JACK_DETECT_CONTROL2] = 0x000, [WMC_ADC_CONTROL] = 0x100, [WMC_LEFT_ADC_DIGITAL_VOL] = 0x0ff, /* Latch left first */ [WMC_RIGHT_ADC_DIGITAL_VOL] = 0x0ff | WMC_VU, [WMC_EQ1_LOW_SHELF] = 0x12c, [WMC_EQ2_PEAK1] = 0x02c, [WMC_EQ3_PEAK2] = 0x02c, [WMC_EQ4_PEAK3] = 0x02c, [WMC_EQ5_HIGH_SHELF] = 0x02c, [WMC_DAC_LIMITER1] = 0x032, [WMC_DAC_LIMITER2] = 0x000, [WMC_NOTCH_FILTER1] = 0x000, [WMC_NOTCH_FILTER2] = 0x000, [WMC_NOTCH_FILTER3] = 0x000, [WMC_NOTCH_FILTER4] = 0x000, [WMC_ALC_CONTROL1] = 0x038, [WMC_ALC_CONTROL2] = 0x00b, [WMC_ALC_CONTROL3] = 0x032, [WMC_NOISE_GATE] = 0x000, [WMC_PLL_N] = 0x008, [WMC_PLL_K1] = 0x00c, [WMC_PLL_K2] = 0x093, [WMC_PLL_K3] = 0x0e9, [WMC_3D_CONTROL] = 0x000, [WMC_BEEP_CONTROL] = 0x000, [WMC_INPUT_CTRL] = 0x033, [WMC_LEFT_INP_PGA_GAIN_CTRL] = 0x010 | WMC_ZC, /* Latch left first */ [WMC_RIGHT_INP_PGA_GAIN_CTRL] = 0x010 | WMC_VU | WMC_ZC, [WMC_LEFT_ADC_BOOST_CTRL] = 0x100, [WMC_RIGHT_ADC_BOOST_CTRL] = 0x100, [WMC_OUTPUT_CTRL] = 0x002, [WMC_LEFT_MIXER_CTRL] = 0x001, [WMC_RIGHT_MIXER_CTRL] = 0x001, [WMC_LOUT1_HP_VOLUME_CTRL] = 0x039 | WMC_ZC, /* Latch left first */ [WMC_ROUT1_HP_VOLUME_CTRL] = 0x039 | WMC_VU | WMC_ZC, [WMC_LOUT2_SPK_VOLUME_CTRL] = 0x039 | WMC_ZC, /* Latch left first */ [WMC_ROUT2_SPK_VOLUME_CTRL] = 0x039 | WMC_VU | WMC_ZC, [WMC_OUT3_MIXER_CTRL] = 0x001, [WMC_OUT4_MONO_MIXER_CTRL] = 0x001, }; struct { signed char vol_l; signed char vol_r; unsigned char dac_l; unsigned char dac_r; unsigned char ahw_mute; unsigned char prescaler; /* Attenuation */ unsigned char eq_on; /* Enabled */ signed char band_gain[5]; /* Setting */ unsigned char enh_3d_prescaler; /* Attenuation */ unsigned char enh_3d_on; /* Enabled */ unsigned char enh_3d; /* Setting */ } wmc_vol = { .vol_l = 0, .vol_r = 0, .dac_l = 0, .dac_r = 0, .ahw_mute = false, .prescaler = 0, .eq_on = true, .band_gain = { 0, 0, 0, 0, 0 }, .enh_3d_prescaler = 0, .enh_3d_on = true, .enh_3d = 0, }; static void wmc_write(unsigned int reg, unsigned int val) { if (reg >= WMC_NUM_REGISTERS || (wmc_regs[reg] & 0x8000)) { logf("wm8978 invalid register: %d", reg); return; } wmc_regs[reg] = val & ~0x8000; wmcodec_write(reg, val); } void wmc_set(unsigned int reg, unsigned int bits) { wmc_write(reg, wmc_regs[reg] | bits); } void wmc_clear(unsigned int reg, unsigned int bits) { wmc_write(reg, wmc_regs[reg] & ~bits); } static void wmc_write_masked(unsigned int reg, unsigned int bits, unsigned int mask) { wmc_write(reg, (wmc_regs[reg] & ~mask) | (bits & mask)); } /* convert tenth of dB volume (-890..60) to master volume register value * (000000...111111) */ int tenthdb2master(int db) { /* -90dB to +6dB 1dB steps (96 levels) 7bits */ /* 1100000 == +6dB (0x60,96) */ /* 1101010 == 0dB (0x5a,90) */ /* 1000001 == -57dB (0x21,33,DAC) */ /* 0000001 == -89dB (0x01,01) */ /* 0000000 == -90dB (0x00,00,Mute) */ if (db <= VOLUME_MIN) { return 0x0; } else { return (db - VOLUME_MIN) / 10; } } int sound_val2phys(int setting, int value) { int result; switch (setting) { #ifdef HAVE_RECORDING case SOUND_LEFT_GAIN: case SOUND_RIGHT_GAIN: case SOUND_MIC_GAIN: result = value * 5; break; #endif case SOUND_EQ_BAND1_GAIN+0x10000: case SOUND_EQ_BAND2_GAIN+0x10000: case SOUND_EQ_BAND3_GAIN+0x10000: case SOUND_EQ_BAND4_GAIN+0x10000: case SOUND_EQ_BAND5_GAIN+0x10000: result = value * 10; break; case SOUND_DEPTH_3D: result = (100 * value + 8) / 15; break; default: result = value; } return result; } void audiohw_preinit(void) { /* 1. Turn on external power supplies. Wait for supply voltage to settle. */ /* Step 1 should be completed already. Reset and return all registers to * defaults */ wmcodec_write(WMC_SOFTWARE_RESET, 0xff); sleep(HZ/10); /* 2. Mute all analogue outputs */ wmc_set(WMC_LOUT1_HP_VOLUME_CTRL, WMC_MUTE); wmc_set(WMC_ROUT1_HP_VOLUME_CTRL, WMC_MUTE); wmc_set(WMC_LOUT2_SPK_VOLUME_CTRL, WMC_MUTE); wmc_set(WMC_ROUT2_SPK_VOLUME_CTRL, WMC_MUTE); wmc_set(WMC_OUT3_MIXER_CTRL, WMC_MUTE); wmc_set(WMC_OUT4_MONO_MIXER_CTRL, WMC_MUTE); /* 3. Set L/RMIXEN = 1 and DACENL/R = 1 in register R3. */ wmc_write(WMC_POWER_MANAGEMENT3, WMC_RMIXEN | WMC_LMIXEN); /* EQ and 3D applied to DAC (Set before DAC enable!) */ wmc_set(WMC_EQ1_LOW_SHELF, WMC_EQ3DMODE); wmc_set(WMC_POWER_MANAGEMENT3, WMC_DACENR | WMC_DACENL); /* 4. Set BUFIOEN = 1 and VMIDSEL[1:0] to required value in register * R1. Wait for VMID supply to settle */ wmc_write(WMC_POWER_MANAGEMENT1, WMC_BUFIOEN | WMC_VMIDSEL_300K); sleep(HZ/10); /* 5. Set BIASEN = 1 in register R1. */ wmc_set(WMC_POWER_MANAGEMENT1, WMC_BIASEN); /* 6. Set L/ROUTEN = 1 in register R2. */ wmc_write(WMC_POWER_MANAGEMENT2, WMC_LOUT1EN | WMC_ROUT1EN); } void audiohw_postinit(void) { sleep(5*HZ/4); /* 7. Enable other mixers as required */ /* 8. Enable other outputs as required */ /* 9. Set remaining registers */ wmc_write(WMC_AUDIO_INTERFACE, WMC_WL_16 | WMC_FMT_I2S); wmc_write(WMC_DAC_CONTROL, WMC_DACOSR_128); /* No ADC, no HP filter, no popping */ wmc_clear(WMC_ADC_CONTROL, WMC_HPFEN); wmc_clear(WMC_LEFT_ADC_BOOST_CTRL, WMC_PGABOOSTL); wmc_clear(WMC_RIGHT_ADC_BOOST_CTRL, WMC_PGABOOSTR); /* Specific to HW clocking */ wmc_write_masked(WMC_CLOCK_GEN_CTRL, WMC_BCLKDIV_4 | WMC_MS, WMC_BCLKDIV | WMC_MS | WMC_CLKSEL); audiohw_set_frequency(HW_FREQ_DEFAULT); audiohw_enable_headphone_jack(true); } static void get_headphone_levels(int val, int *dac_p, int *hp_p, int *mix_p, int *boost_p) { int dac, hp, mix, boost; if (val >= 33) { dac = 255; hp = val - 33; mix = 7; boost = 5; } else if (val >= 21) { dac = 189 + val / 3 * 6; hp = val % 3; mix = 7; boost = (val - 18) / 3; } else { dac = 189 + val / 3 * 6; hp = val % 3; mix = val / 3; boost = 1; } *dac_p = dac; *hp_p = hp; *mix_p = mix; *boost_p = boost; } static void sync_prescaler(void) { int prescaler = 0; /* Combine all prescaling into a single DAC attenuation */ if (wmc_vol.eq_on) prescaler = wmc_vol.prescaler; if (wmc_vol.enh_3d_on) prescaler += wmc_vol.enh_3d_prescaler; wmc_write_masked(WMC_LEFT_DAC_DIGITAL_VOL, wmc_vol.dac_l - prescaler, WMC_DVOL); wmc_write_masked(WMC_RIGHT_DAC_DIGITAL_VOL, wmc_vol.dac_r - prescaler, WMC_DVOL); } void audiohw_set_headphone_vol(int vol_l, int vol_r) { int prev_l = wmc_vol.vol_l; int prev_r = wmc_vol.vol_r; int dac_l, dac_r, hp_l, hp_r; int mix_l, mix_r, boost_l, boost_r; wmc_vol.vol_l = vol_l; wmc_vol.vol_r = vol_r; /* Mixers are synced to provide full volume range on both the analogue * and digital pathways */ get_headphone_levels(vol_l, &dac_l, &hp_l, &mix_l, &boost_l); get_headphone_levels(vol_r, &dac_r, &hp_r, &mix_r, &boost_r); wmc_vol.dac_l = dac_l; wmc_vol.dac_r = dac_r; sync_prescaler(); wmc_write_masked(WMC_LEFT_MIXER_CTRL, mix_l << WMC_BYPLMIXVOL_POS, WMC_BYPLMIXVOL); wmc_write_masked(WMC_LEFT_ADC_BOOST_CTRL, boost_l << WMC_L2_2BOOSTVOL_POS, WMC_L2_2BOOSTVOL); wmc_write_masked(WMC_LOUT1_HP_VOLUME_CTRL, hp_l, WMC_AVOL); wmc_write_masked(WMC_RIGHT_MIXER_CTRL, mix_r << WMC_BYPRMIXVOL_POS, WMC_BYPRMIXVOL); wmc_write_masked(WMC_RIGHT_ADC_BOOST_CTRL, boost_r << WMC_R2_2BOOSTVOL_POS, WMC_R2_2BOOSTVOL); wmc_write_masked(WMC_ROUT1_HP_VOLUME_CTRL, hp_r, WMC_AVOL); if (vol_l > 0) { /* Not muted and going up from mute level? */ if (prev_l <= 0 && !wmc_vol.ahw_mute) wmc_clear(WMC_LOUT1_HP_VOLUME_CTRL, WMC_MUTE); } else { /* Going to mute level? */ if (prev_l > 0) wmc_set(WMC_LOUT1_HP_VOLUME_CTRL, WMC_MUTE); } if (vol_r > 0) { /* Not muted and going up from mute level? */ if (prev_r <= 0 && !wmc_vol.ahw_mute) wmc_clear(WMC_ROUT1_HP_VOLUME_CTRL, WMC_MUTE); } else { /* Going to mute level? */ if (prev_r > 0) wmc_set(WMC_ROUT1_HP_VOLUME_CTRL, WMC_MUTE); } } static void audiohw_mute(bool mute) { wmc_vol.ahw_mute = mute; /* No DAC mute here, please - take care of each enabled output. */ if (mute) { wmc_set(WMC_LOUT1_HP_VOLUME_CTRL, WMC_MUTE); wmc_set(WMC_ROUT1_HP_VOLUME_CTRL, WMC_MUTE); } else { /* Unmute outputs not at mute level */ if (wmc_vol.vol_l > 0) wmc_clear(WMC_LOUT1_HP_VOLUME_CTRL, WMC_MUTE); if (wmc_vol.vol_r > 0) wmc_clear(WMC_ROUT1_HP_VOLUME_CTRL, WMC_MUTE); } } /* Equalizer - set the eq band level -12 to +12 dB. */ void audiohw_set_eq_band_gain(unsigned int band, int val) { if (band > 4) return; wmc_vol.band_gain[band] = val; if (!wmc_vol.eq_on) val = 0; wmc_write_masked(band + WMC_EQ1_LOW_SHELF, 12 - val, WMC_EQG); } /* Equalizer - set the eq band frequency index. */ void audiohw_set_eq_band_frequency(unsigned int band, int val) { if (band > 4) return; wmc_write_masked(band + WMC_EQ1_LOW_SHELF, val << WMC_EQC_POS, WMC_EQC); } /* Equalizer - set bandwidth for peaking filters to wide (!= 0) or * narrow (0); only valid for peaking filter bands 1-3. */ void audiohw_set_eq_band_width(unsigned int band, int val) { if (band < 1 || band > 3) return; wmc_write_masked(band + WMC_EQ1_LOW_SHELF, (val == 0) ? 0 : WMC_EQBW, WMC_EQBW); } /* Set prescaler to prevent clipping the output amp when applying positive * gain to EQ bands. */ void audiohw_set_prescaler(int val) { wmc_vol.prescaler = val / 5; /* centibels->semi-decibels */ sync_prescaler(); } /* Set the depth of the 3D effect */ void audiohw_set_depth_3d(int val) { wmc_vol.enh_3d_prescaler = 10*val / 15; /* -5 dB @ full setting */ wmc_vol.enh_3d = val; if (!wmc_vol.enh_3d_on) val = 0; sync_prescaler(); wmc_write_masked(WMC_3D_CONTROL, val, WMC_DEPTH3D); } void audiohw_close(void) { /* 1. Mute all analogue outputs */ audiohw_mute(true); audiohw_enable_headphone_jack(false); /* 2. Disable power management register 1. R1 = 00 */ wmc_write(WMC_POWER_MANAGEMENT1, 0x000); /* 3. Disable power management register 2. R2 = 00 */ wmc_write(WMC_POWER_MANAGEMENT2, 0x000); /* 4. Disable power management register 3. R3 = 00 */ wmc_write(WMC_POWER_MANAGEMENT3, 0x000); /* 5. Remove external power supplies. */ } void audiohw_set_frequency(int fsel) { extern const struct wmc_srctrl_entry wmc_srctrl_table[HW_NUM_FREQ]; unsigned int plln; unsigned int mclkdiv; if ((unsigned)fsel >= HW_NUM_FREQ) fsel = HW_FREQ_DEFAULT; /* Setup filters. */ wmc_write(WMC_ADDITIONAL_CTRL, wmc_srctrl_table[fsel].filter); plln = wmc_srctrl_table[fsel].plln; mclkdiv = wmc_srctrl_table[fsel].mclkdiv; if (plln != 0) { /* Using PLL to generate SYSCLK */ /* Program PLL. */ wmc_write(WMC_PLL_N, plln); wmc_write(WMC_PLL_K1, wmc_srctrl_table[fsel].pllk1); wmc_write(WMC_PLL_K2, wmc_srctrl_table[fsel].pllk2); wmc_write(WMC_PLL_K3, wmc_srctrl_table[fsel].pllk3); /* Turn on PLL. */ wmc_set(WMC_POWER_MANAGEMENT1, WMC_PLLEN); /* Switch to PLL and set divider. */ wmc_write_masked(WMC_CLOCK_GEN_CTRL, mclkdiv | WMC_CLKSEL, WMC_MCLKDIV | WMC_CLKSEL); } else { /* Switch away from PLL and set MCLKDIV. */ wmc_write_masked(WMC_CLOCK_GEN_CTRL, mclkdiv, WMC_MCLKDIV | WMC_CLKSEL); /* Turn off PLL. */ wmc_clear(WMC_POWER_MANAGEMENT1, WMC_PLLEN); } } void audiohw_enable_tone_controls(bool enable) { int i; wmc_vol.eq_on = enable; audiohw_set_prescaler(wmc_vol.prescaler); for (i = 0; i < 5; i++) audiohw_set_eq_band_gain(i, wmc_vol.band_gain[i]); } void audiohw_enable_depth_3d(bool enable) { wmc_vol.enh_3d_on = enable; audiohw_set_depth_3d(wmc_vol.enh_3d); } #ifdef HAVE_RECORDING void audiohw_set_recsrc(int source, bool recording) { switch (source) { case AUDIO_SRC_PLAYBACK: /* Disable all audio paths but DAC */ /* Disable ADCs */ wmc_clear(WMC_ADC_CONTROL, WMC_HPFEN); wmc_clear(WMC_POWER_MANAGEMENT2, WMC_ADCENL | WMC_ADCENR); /* Disable bypass */ wmc_clear(WMC_LEFT_MIXER_CTRL, WMC_BYPL2LMIX); wmc_clear(WMC_RIGHT_MIXER_CTRL, WMC_BYPR2RMIX); /* Disable IP BOOSTMIX and PGA */ wmc_clear(WMC_POWER_MANAGEMENT2, WMC_INPPGAENL | WMC_INPPGAENR | WMC_BOOSTENL | WMC_BOOSTENR); wmc_clear(WMC_INPUT_CTRL, WMC_L2_2INPPGA | WMC_R2_2INPPGA | WMC_LIP2INPPGA | WMC_RIP2INPPGA | WMC_LIN2INPPGA | WMC_RIN2INPPGA); wmc_clear(WMC_LEFT_ADC_BOOST_CTRL, WMC_PGABOOSTL); wmc_clear(WMC_RIGHT_ADC_BOOST_CTRL, WMC_PGABOOSTR); break; case AUDIO_SRC_FMRADIO: if (recording) { /* Disable bypass */ wmc_clear(WMC_LEFT_MIXER_CTRL, WMC_BYPL2LMIX); wmc_clear(WMC_RIGHT_MIXER_CTRL, WMC_BYPR2RMIX); /* Enable ADCs, IP BOOSTMIX and PGA, route L/R2 through PGA */ wmc_set(WMC_POWER_MANAGEMENT2, WMC_ADCENL | WMC_ADCENR | WMC_BOOSTENL | WMC_BOOSTENR | WMC_INPPGAENL | WMC_INPPGAENR); wmc_set(WMC_ADC_CONTROL, WMC_ADCOSR | WMC_HPFEN); /* PGA at 0dB with +20dB boost */ wmc_write_masked(WMC_LEFT_INP_PGA_GAIN_CTRL, 0x10, WMC_AVOL); wmc_write_masked(WMC_RIGHT_INP_PGA_GAIN_CTRL, 0x10, WMC_AVOL); wmc_set(WMC_LEFT_ADC_BOOST_CTRL, WMC_PGABOOSTL); wmc_set(WMC_RIGHT_ADC_BOOST_CTRL, WMC_PGABOOSTR); /* Connect L/R2 inputs to PGA */ wmc_write_masked(WMC_INPUT_CTRL, WMC_L2_2INPPGA | WMC_R2_2INPPGA | WMC_LIN2INPPGA | WMC_RIN2INPPGA, WMC_L2_2INPPGA | WMC_R2_2INPPGA | WMC_LIP2INPPGA | WMC_RIP2INPPGA | WMC_LIN2INPPGA | WMC_RIN2INPPGA); } else { /* Disable PGA and ADC, enable IP BOOSTMIX, route L/R2 directly to * IP BOOSTMIX */ wmc_clear(WMC_ADC_CONTROL, WMC_HPFEN); wmc_write_masked(WMC_POWER_MANAGEMENT2, WMC_BOOSTENL | WMC_BOOSTENR, WMC_BOOSTENL | WMC_BOOSTENR | WMC_INPPGAENL | WMC_INPPGAENR | WMC_ADCENL | WMC_ADCENR); wmc_clear(WMC_INPUT_CTRL, WMC_L2_2INPPGA | WMC_R2_2INPPGA | WMC_LIP2INPPGA | WMC_RIP2INPPGA | WMC_LIN2INPPGA | WMC_RIN2INPPGA); wmc_clear(WMC_LEFT_ADC_BOOST_CTRL, WMC_PGABOOSTL); wmc_clear(WMC_RIGHT_ADC_BOOST_CTRL, WMC_PGABOOSTR); /* Enable bypass to L/R mixers */ wmc_set(WMC_LEFT_MIXER_CTRL, WMC_BYPL2LMIX); wmc_set(WMC_RIGHT_MIXER_CTRL, WMC_BYPR2RMIX); } break; } } void audiohw_set_recvol(int left, int right, int type) { switch (type) { case AUDIO_GAIN_LINEIN: wmc_write_masked(WMC_LEFT_ADC_DIGITAL_VOL, left + 239, WMC_DVOL); wmc_write_masked(WMC_RIGHT_ADC_DIGITAL_VOL, right + 239, WMC_DVOL); return; } } #endif /* HAVE_RECORDING */