/* * This config file is for IHIFI 760 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 92 #define MODEL_NAME "IHIFI 760" /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ /* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */ /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \ SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \ SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) #define HAVE_DUMMY_CODEC #define CODEC_SLAVE /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you can flip your LCD */ /* #define HAVE_LCD_FLIP */ /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can invert the colours on your LCD */ /* #define HAVE_LCD_INVERT */ /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND) #define CONFIG_NAND NAND_RK27XX #define HAVE_SW_TONE_CONTROLS #define HAVE_SW_VOLUME_CONTROL /* commented for now */ /* #define HAVE_HOTSWAP */ #define NUM_DRIVES 1 #define SECTOR_SIZE 512 /* for small(ish) SD cards */ #define HAVE_FAT16SUPPORT /* LCD dimensions */ #define LCD_WIDTH 320 #define LCD_HEIGHT 240 /* sqrt(320^2 + 240^2) / 2.4 = 166.7 */ #define LCD_DPI 167 #define LCD_DEPTH 16 /* pseudo 262.144 colors */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if the LCD can shut down */ /* #define HAVE_LCD_SHUTDOWN */ /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ #ifndef BOOTLOADER /* TODO: #define HAVE_LCD_SLEEP */ /* TODO: #define HAVE_LCD_SLEEP_SETTING */ #endif #define CONFIG_KEYPAD IHIFI_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ /* #define CONFIG_RTC RTC_NANO2G */ /* Define if the device can wake from an RTC alarm */ /* #define HAVE_RTC_ALARM */ #define CONFIG_LCD LCD_IHIFI /* Define the type of audio codec */ /*#define HAVE_RK27XX_CODEC */ /* #define HAVE_PCM_DMA_ADDRESS */ /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS #define MIN_BRIGHTNESS_SETTING 0 #define MAX_BRIGHTNESS_SETTING 31 #define DEFAULT_BRIGHTNESS_SETTING 20 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* TODO: Figure out real values */ #define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 10 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define current usage levels */ /* TODO: #define CURRENT_NORMAL * TODO: #define CURRENT_BACKLIGHT 23 */ /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_RK27XX /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x071b #define USB_PRODUCT_ID 0x3202 #define HAVE_BOOTLOADER_USB_MODE /* Define this if your LCD can set contrast */ /* #define HAVE_LCD_CONTRAST */ /* The exact type of CPU */ #define CONFIG_CPU RK27XX /* I2C interface */ #define CONFIG_I2C I2C_RK27XX /* Define this to the CPU frequency */ #define CPU_FREQ 200000000 /* define this if the hardware can be powered off while charging */ /* #define HAVE_POWEROFF_WHILE_CHARGING */ /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 #define STORAGE_NEEDS_ALIGN /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Virtual LED (icon) */ #define CONFIG_LED LED_VIRTUAL #define RKW_FORMAT #define BOOTFILE_EXT "rkw" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox"