/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Barry Wardell * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #include "system.h" #include "kernel.h" #include "thread.h" #include "adc.h" static unsigned short adcdata[NUM_ADC_CHANNELS]; /* Scan ADC so that adcdata[channel] gets updated */ unsigned short adc_scan(int channel) { unsigned int adc_data_1; unsigned int adc_data_2; /* Initialise */ ADC_ADDR=0x130; ADC_STATUS=0; /* 4 bytes, 1 per channel. Each byte is 0 if the channel is off, 0x40 if the channel is on */ /* Enable Channel */ ADC_ADDR |= (0x1000000<> (8*channel)) & 0xff); adc_data_2 = ((ADC_DATA_2 >> (8*channel+6)) & 0x3); adcdata[channel] = (adc_data_1<<2 | adc_data_2); /* FIXME: Hardcode a value for ~82% charge in here until we figure out the ADC. This will avoid the low battery warning message. */ adcdata[ADC_UNREG_POWER] = 0x2C0; return adcdata[channel]; } /* Read 10-bit channel data */ unsigned short adc_read(int channel) { return adcdata[channel]; } static int adc_counter; static void adc_tick(void) { if(++adc_counter == HZ) { adc_counter = 0; adc_scan(ADC_0); adc_scan(ADC_1); adc_scan(ADC_2); adc_scan(ADC_3); } } void adc_init(void) { /* Enable ADC */ ADC_ENABLE_ADDR |= ADC_ENABLE; /* Initialise */ ADC_INIT=0; /* Force a scan of all channels to get initial values */ adc_scan(ADC_0); adc_scan(ADC_1); adc_scan(ADC_2); adc_scan(ADC_3); tick_add_task(adc_tick); }