/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Alan Korr & Nick Robinson * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include #include #include #include "panic.h" #include "iap-core.h" #include "iap-lingo.h" #include "button.h" #include "config.h" #include "cpu.h" #include "system.h" #include "kernel.h" #include "thread.h" #include "serial.h" #include "appevents.h" #include "core_alloc.h" #include "playlist.h" #include "playback.h" #include "audio.h" #include "settings.h" #include "metadata.h" #include "sound.h" #include "action.h" #include "powermgmt.h" #include "usb.h" #include "tuner.h" #include "ipod_remote_tuner.h" /* MS_TO_TICKS converts a milisecond time period into the * corresponding amount of ticks. If the time period cannot * be accurately measured in ticks it will round up. */ #if (HZ>1000) #error "HZ is >1000, please fix MS_TO_TICKS" #endif #define MS_PER_HZ (1000/HZ) #define MS_TO_TICKS(x) (((x)+MS_PER_HZ-1)/MS_PER_HZ) /* IAP specifies a timeout of 25ms for traffic from a device to the iPod. * Depending on HZ this cannot be accurately measured. Find out the next * best thing. */ #define IAP_PKT_TIMEOUT (MS_TO_TICKS(25)) /* Events in the iap_queue */ #define IAP_EV_TICK (1) /* The regular task timeout */ #define IAP_EV_MSG_RCVD (2) /* A complete message has been received from the device */ #define IAP_EV_MALLOC (3) /* Allocate memory for the RX/TX buffers */ static bool iap_started = false; static bool iap_setupflag = false, iap_running = false; /* This is set to true if a SYS_POWEROFF message is received, * signalling impending power off */ static bool iap_shutdown = false; static struct timeout iap_task_tmo; unsigned long iap_remotebtn = 0; /* Used to make sure a button press is delivered to the processing * backend. While this is !0, no new incoming messasges are processed. * Counted down by remote_control_rx() */ int iap_repeatbtn = 0; /* Used to time out button down events in case we miss the button up event * from the device somehow. * If a device sends a button down event it's required to repeat that event * every 30 to 100ms as long as the button is pressed, and send an explicit * button up event if the button is released. * In case the button up event is lost any down events will time out after * ~200ms. * iap_periodic() will count down this variable and reset all buttons if * it reaches 0 */ unsigned int iap_timeoutbtn = 0; bool iap_btnrepeat = false, iap_btnshuffle = false; static long thread_stack[(DEFAULT_STACK_SIZE*6)/sizeof(long)]; static struct event_queue iap_queue; /* These are pointer used to manage a dynamically allocated buffer which * will hold both the RX and TX side of things. * * iap_buffer_handle is the handle returned from core_alloc() * iap_buffers points to the start of the complete buffer * * The buffer is partitioned as follows: * - TX_BUFLEN+6 bytes for the TX buffer * The 6 extra bytes are for the sync byte, the SOP byte, the length indicators * (3 bytes) and the checksum byte. * iap_txstart points to the beginning of the TX buffer * iap_txpayload points to the beginning of the payload portion of the TX buffer * iap_txnext points to the position where the next byte will be placed * * - RX_BUFLEN+2 bytes for the RX buffer * The RX buffer can hold multiple packets at once, up to it's * maximum capacity. Every packet consists of a two byte length * indicator followed by the actual payload. The length indicator * is two bytes for every length, even for packets with a length <256 * bytes. * * Once a packet has been processed from the RX buffer the rest * of the buffer (and the pointers below) are shifted to the front * so that the next packet again starts at the beginning of the * buffer. This happens with interrupts disabled, to prevent * writing into the buffer during the move. * * iap_rxstart points to the beginning of the RX buffer * iap_rxpayload starts to the beginning of the currently recieved * packet * iap_rxnext points to the position where the next incoming byte * will be placed * iap_rxlen is not a pointer, but an indicator of the free * space left in the RX buffer. * * The RX buffer is placed behind the TX buffer so that an eventual TX * buffer overflow has some place to spill into where it will not cause * immediate damage. See the comments for IAP_TX_* and iap_send_tx() */ #define IAP_MALLOC_SIZE (TX_BUFLEN+6+RX_BUFLEN+2) #ifdef IAP_MALLOC_DYNAMIC static int iap_buffer_handle; #endif static unsigned char* iap_buffers; static unsigned char* iap_rxstart; static unsigned char* iap_rxpayload; static unsigned char* iap_rxnext; static uint32_t iap_rxlen; static unsigned char* iap_txstart; unsigned char* iap_txpayload; unsigned char* iap_txnext; /* The versions of the various Lingoes we support. A major version * of 0 means unsupported */ unsigned char lingo_versions[32][2] = { {1, 9}, /* General lingo, 0x00 */ #ifdef HAVE_LINE_REC {1, 1}, /* Microphone lingo, 0x01 */ #else {0, 0}, /* Microphone lingo, 0x01, disabled */ #endif {1, 2}, /* Simple remote lingo, 0x02 */ {1, 5}, /* Display remote lingo, 0x03 */ {1, 12}, /* Extended Interface lingo, 0x04 */ {1, 1}, /* RF/BT Transmitter lingo, 0x05 */ {} /* All others are unsupported */ }; /* states of the iap de-framing state machine */ enum fsm_state { ST_SYNC, /* wait for 0xFF sync byte */ ST_SOF, /* wait for 0x55 start-of-frame byte */ ST_LEN, /* receive length byte (small packet) */ ST_LENH, /* receive length high byte (large packet) */ ST_LENL, /* receive length low byte (large packet) */ ST_DATA, /* receive data */ ST_CHECK /* verify checksum */ }; static struct state_t { enum fsm_state state; /* current fsm state */ unsigned int len; /* payload data length */ unsigned int check; /* running checksum over [len,payload,check] */ unsigned int count; /* playload bytes counter */ } frame_state = { .state = ST_SYNC }; enum interface_state interface_state = IST_STANDARD; struct device_t device; #ifdef IAP_MALLOC_DYNAMIC static int iap_move_callback(int handle, void* current, void* new); static struct buflib_callbacks iap_buflib_callbacks = { iap_move_callback, NULL }; #endif static void iap_malloc(void); void put_u16(unsigned char *buf, const uint16_t data) { buf[0] = (data >> 8) & 0xFF; buf[1] = (data >> 0) & 0xFF; } void put_u32(unsigned char *buf, const uint32_t data) { buf[0] = (data >> 24) & 0xFF; buf[1] = (data >> 16) & 0xFF; buf[2] = (data >> 8) & 0xFF; buf[3] = (data >> 0) & 0xFF; } uint32_t get_u32(const unsigned char *buf) { return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; } uint16_t get_u16(const unsigned char *buf) { return (buf[0] << 8) | buf[1]; } #if defined(LOGF_ENABLE) && defined(ROCKBOX_HAS_LOGF) /* Convert a buffer into a printable string, perl style * buf contains the data to be converted, len is the length * of the buffer. * * This will convert at most 1024 bytes from buf */ static char* hexstring(const unsigned char *buf, unsigned int len) { static char hexbuf[4097]; unsigned int l; const unsigned char* p; unsigned char* out; unsigned char h[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; if (len > 1024) { l = 1024; } else { l = len; } p = buf; out = hexbuf; do { *out++ = h[(*p)>>4]; *out++ = h[*p & 0x0F]; } while(--l && p++); *out = 0x00; return hexbuf; } #endif void iap_tx_strlcpy(const unsigned char *str) { ptrdiff_t txfree; int r; txfree = TX_BUFLEN - (iap_txnext - iap_txstart); r = strlcpy(iap_txnext, str, txfree); if (r < txfree) { /* No truncation occured * Account for the terminating \0 */ iap_txnext += (r+1); } else { /* Truncation occured, the TX buffer is now full. */ iap_txnext = iap_txstart + TX_BUFLEN; } } void iap_reset_auth(struct auth_t* auth) { auth->state = AUST_NONE; auth->max_section = 0; auth->next_section = 0; } void iap_reset_device(struct device_t* device) { iap_reset_auth(&(device->auth)); device->lingoes = 0; device->notifications = 0; device->changed_notifications = 0; device->do_notify = false; device->do_power_notify = false; device->accinfo = ACCST_NONE; device->capabilities = 0; device->capabilities_queried = 0; } static int iap_task(struct timeout *tmo) { (void) tmo; queue_post(&iap_queue, IAP_EV_TICK, 0); return MS_TO_TICKS(100); } /* This thread is waiting for events posted to iap_queue and calls * the appropriate subroutines in response */ static void iap_thread(void) { struct queue_event ev; while(1) { queue_wait(&iap_queue, &ev); switch (ev.id) { /* Handle the regular 100ms tick used for driving the * authentication state machine and notifications */ case IAP_EV_TICK: { iap_periodic(); break; } /* Handle a newly received message from the device */ case IAP_EV_MSG_RCVD: { iap_handlepkt(); break; } /* Handle memory allocation. This is used only once, during * startup */ case IAP_EV_MALLOC: { iap_malloc(); break; } /* Handle poweroff message */ case SYS_POWEROFF: { iap_shutdown = true; break; } /* Ack USB thread */ case SYS_USB_CONNECTED: { usb_acknowledge(SYS_USB_CONNECTED_ACK); break; } } } } /* called by playback when the next track starts */ static void iap_track_changed(unsigned short id, void *ignored) { (void)id; (void)ignored; if ((interface_state == IST_EXTENDED) && device.do_notify) { long playlist_pos = playlist_next(0); playlist_pos -= playlist_get_first_index(NULL); if(playlist_pos < 0) playlist_pos += playlist_amount(); IAP_TX_INIT4(0x04, 0x0027); IAP_TX_PUT(0x01); IAP_TX_PUT_U32(playlist_pos); iap_send_tx(); return; } } /* Do general setup of the needed infrastructure. * * Please note that a lot of additional work is done by iap_start() */ void iap_setup(const int ratenum) { iap_bitrate_set(ratenum); iap_remotebtn = BUTTON_NONE; iap_setupflag = true; iap_started = false; iap_running = false; } /* Actually bring up the message queue, message handler thread and * notification timer * * NOTE: This is running in interrupt context */ static void iap_start(void) { unsigned int tid; if (iap_started) return; iap_reset_device(&device); queue_init(&iap_queue, true); tid = create_thread(iap_thread, thread_stack, sizeof(thread_stack), 0, "iap" IF_PRIO(, PRIORITY_SYSTEM) IF_COP(, CPU)); if (!tid) panicf("Could not create iap thread"); timeout_register(&iap_task_tmo, iap_task, MS_TO_TICKS(100), (intptr_t)NULL); add_event(PLAYBACK_EVENT_TRACK_CHANGE, iap_track_changed); /* Since we cannot allocate memory while in interrupt context * post a message to our own queue to get that done */ queue_post(&iap_queue, IAP_EV_MALLOC, 0); iap_started = true; } static void iap_malloc(void) { #ifndef IAP_MALLOC_DYNAMIC static unsigned char serbuf[IAP_MALLOC_SIZE]; #endif if (iap_running) return; #ifdef IAP_MALLOC_DYNAMIC iap_buffer_handle = core_alloc_ex("iap", IAP_MALLOC_SIZE, &iap_buflib_callbacks); if (iap_buffer_handle < 0) panicf("Could not allocate buffer memory"); iap_buffers = core_get_data(iap_buffer_handle); #else iap_buffers = serbuf; #endif iap_txstart = iap_buffers; iap_txpayload = iap_txstart+5; iap_txnext = iap_txpayload; iap_rxstart = iap_buffers+(TX_BUFLEN+6); iap_rxpayload = iap_rxstart; iap_rxnext = iap_rxpayload; iap_rxlen = RX_BUFLEN+2; iap_running = true; } void iap_bitrate_set(const int ratenum) { switch(ratenum) { case 0: serial_bitrate(0); break; case 1: serial_bitrate(9600); break; case 2: serial_bitrate(19200); break; case 3: serial_bitrate(38400); break; case 4: serial_bitrate(57600); break; } } /* Message format: 0xff 0x55 length mode command (2 bytes) parameters (0-n bytes) checksum (length+mode+parameters+checksum == 0) */ /* Send the current content of the TX buffer. * This will check for TX buffer overflow and panic, but it might * be too late by then (although one would have to overflow the complete * RX buffer as well) */ void iap_send_tx(void) { int i, chksum; ptrdiff_t txlen; unsigned char* txstart; txlen = iap_txnext - iap_txpayload; if (txlen <= 0) return; if (txlen > TX_BUFLEN) panicf("IAP: TX buffer overflow"); if (txlen < 256) { /* Short packet */ txstart = iap_txstart+2; *(txstart+2) = txlen; chksum = txlen; } else { /* Long packet */ txstart = iap_txstart; *(txstart+2) = 0x00; *(txstart+3) = (txlen >> 8) & 0xFF; *(txstart+4) = (txlen) & 0xFF; chksum = *(txstart+3) + *(txstart+4); } *(txstart) = 0xFF; *(txstart+1) = 0x55; for (i=0; istate != ST_SYNC) && TIME_AFTER(current_tick, pkt_timeout)) { /* Packet timeouts only make sense while not waiting for the * sync byte */ s->state = ST_SYNC; return iap_getc(x); } /* run state machine to detect and extract a valid frame */ switch (s->state) { case ST_SYNC: if (x == 0xFF) { /* The IAP infrastructure is started by the first received sync * byte. It takes a while to spin up, so do not advance the state * machine until it has started. */ if (!iap_running) { iap_start(); break; } iap_rxnext = iap_rxpayload; s->state = ST_SOF; } break; case ST_SOF: if (x == 0x55) { /* received a valid sync/SOF pair */ s->state = ST_LEN; } else { s->state = ST_SYNC; return iap_getc(x); } break; case ST_LEN: s->check = x; s->count = 0; if (x == 0) { /* large packet */ s->state = ST_LENH; } else { /* small packet */ if (x > (iap_rxlen-2)) { /* Packet too long for buffer */ s->state = ST_SYNC; break; } s->len = x; s->state = ST_DATA; put_u16(iap_rxnext, s->len); iap_rxnext += 2; } break; case ST_LENH: s->check += x; s->len = x << 8; s->state = ST_LENL; break; case ST_LENL: s->check += x; s->len += x; if ((s->len == 0) || (s->len > (iap_rxlen-2))) { /* invalid length */ s->state = ST_SYNC; break; } else { s->state = ST_DATA; put_u16(iap_rxnext, s->len); iap_rxnext += 2; } break; case ST_DATA: s->check += x; *(iap_rxnext++) = x; s->count += 1; if (s->count == s->len) { s->state = ST_CHECK; } break; case ST_CHECK: s->check += x; if ((s->check & 0xFF) == 0) { /* done, received a valid frame */ iap_rxpayload = iap_rxnext; queue_post(&iap_queue, IAP_EV_MSG_RCVD, 0); } else { /* Invalid frame */ } s->state = ST_SYNC; break; default: #ifdef LOGF_ENABLE logf("Unhandled iap state %d", (int) s->state); #else panicf("Unhandled iap state %d", (int) s->state); #endif break; } pkt_timeout = current_tick + IAP_PKT_TIMEOUT; /* return true while still hunting for the sync and start-of-frame byte */ return (s->state == ST_SYNC) || (s->state == ST_SOF); } void iap_get_trackinfo(const unsigned int track, struct mp3entry* id3) { int tracknum; int fd; struct playlist_track_info info; tracknum = track; tracknum += playlist_get_first_index(NULL); if(tracknum >= playlist_amount()) tracknum -= playlist_amount(); /* If the tracknumber is not the current one, read id3 from disk */ if(playlist_next(0) != tracknum) { playlist_get_track_info(NULL, tracknum, &info); fd = open(info.filename, O_RDONLY); memset(id3, 0, sizeof(*id3)); get_metadata(id3, fd, info.filename); close(fd); } else { memcpy(id3, audio_current_track(), sizeof(*id3)); } } uint32_t iap_get_trackpos(void) { struct mp3entry *id3 = audio_current_track(); return id3->elapsed; } uint32_t iap_get_trackindex(void) { struct playlist_info* playlist = playlist_get_current(); return (playlist->index - playlist->first_index); } void iap_periodic(void) { static int count; if(!iap_setupflag) return; /* Handle pending authentication tasks */ switch (device.auth.state) { case AUST_INIT: { /* Send out GetDevAuthenticationInfo */ IAP_TX_INIT(0x00, 0x14); iap_send_tx(); device.auth.state = AUST_CERTREQ; break; } case AUST_CERTDONE: { /* Send out GetDevAuthenticationSignature, with * 20 bytes of challenge and a retry counter of 1. * Since we do not really care about the content of the * challenge we just use the first 20 bytes of whatever * is in the RX buffer right now. */ IAP_TX_INIT(0x00, 0x17); IAP_TX_PUT_DATA(iap_rxstart, (device.auth.version == 0x100) ? 16 : 20); IAP_TX_PUT(0x01); iap_send_tx(); device.auth.state = AUST_CHASENT; break; } default: { break; } } /* Time out button down events */ if (iap_timeoutbtn) iap_timeoutbtn -= 1; if (!iap_timeoutbtn) { iap_remotebtn = BUTTON_NONE; iap_repeatbtn = 0; iap_btnshuffle = false; iap_btnrepeat = false; } /* Handle power down messages. */ if (iap_shutdown && device.do_power_notify) { /* NotifyiPodStateChange */ IAP_TX_INIT(0x00, 0x23); IAP_TX_PUT(0x01); iap_send_tx(); /* No further actions, we're going down */ iap_reset_device(&device); return; } /* Handle GetAccessoryInfo messages */ if (device.accinfo == ACCST_INIT) { /* GetAccessoryInfo */ IAP_TX_INIT(0x00, 0x27); IAP_TX_PUT(0x00); iap_send_tx(); device.accinfo = ACCST_SENT; } /* Do not send requests for device information while * an authentication is still running, this seems to * confuse some devices */ if (!DEVICE_AUTH_RUNNING && (device.accinfo == ACCST_DATA)) { int first_set; /* Find the first bit set in the capabilities field, * ignoring those we already asked for */ first_set = find_first_set_bit(device.capabilities & (~device.capabilities_queried)); if (first_set != 32) { /* Add bit to queried cababilities */ device.capabilities_queried |= BIT_N(first_set); switch (first_set) { /* Name */ case 0x01: /* Firmware version */ case 0x04: /* Hardware version */ case 0x05: /* Manufacturer */ case 0x06: /* Model number */ case 0x07: /* Serial number */ case 0x08: /* Maximum payload size */ case 0x09: { IAP_TX_INIT(0x00, 0x27); IAP_TX_PUT(first_set); iap_send_tx(); break; } /* Minimum supported iPod firmware version */ case 0x02: { IAP_TX_INIT(0x00, 0x27); IAP_TX_PUT(2); IAP_TX_PUT_U32(IAP_IPOD_MODEL); IAP_TX_PUT(IAP_IPOD_FIRMWARE_MAJOR); IAP_TX_PUT(IAP_IPOD_FIRMWARE_MINOR); IAP_TX_PUT(IAP_IPOD_FIRMWARE_REV); iap_send_tx(); break; } /* Minimum supported lingo version. Queries Lingo 0 */ case 0x03: { IAP_TX_INIT(0x00, 0x27); IAP_TX_PUT(3); IAP_TX_PUT(0); iap_send_tx(); break; } } device.accinfo = ACCST_SENT; } } if (!device.do_notify) return; if ((device.notifications == 0) && (interface_state != IST_EXTENDED)) return; /* Volume change notifications are sent every 100ms */ if (device.notifications & (BIT_N(4) | BIT_N(16))) { /* Currently we do not track volume changes, so this is * never sent. * * TODO: Fix volume tracking */ } /* All other events are sent every 500ms */ count += 1; if (count < 5) return; count = 0; /* RemoteEventNotification */ /* Mode 04 PlayStatusChangeNotification */ /* Are we in Extended Mode */ if (interface_state == IST_EXTENDED) { /* Return Track Position */ struct mp3entry *id3 = audio_current_track(); unsigned long time_elapsed = id3->elapsed; IAP_TX_INIT4(0x04, 0x0027); IAP_TX_PUT(0x04); IAP_TX_PUT_U32(time_elapsed); iap_send_tx(); } /* Track position (ms) or Track position (s) */ if (device.notifications & (BIT_N(0) | BIT_N(15))) { uint32_t t; uint16_t ts; bool changed; t = iap_get_trackpos(); ts = (t / 1000) & 0xFFFF; if ((device.notifications & BIT_N(0)) && (device.trackpos_ms != t)) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x00); IAP_TX_PUT_U32(t); device.changed_notifications |= BIT_N(0); changed = true; iap_send_tx(); } if ((device.notifications & BIT_N(15)) && (device.trackpos_s != ts)) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x0F); IAP_TX_PUT_U16(ts); device.changed_notifications |= BIT_N(15); changed = true; iap_send_tx(); } if (changed) { device.trackpos_ms = t; device.trackpos_s = ts; } } /* Track index */ if (device.notifications & BIT_N(1)) { uint32_t index; index = iap_get_trackindex(); if (device.track_index != index) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x01); IAP_TX_PUT_U32(index); device.changed_notifications |= BIT_N(1); iap_send_tx(); device.track_index = index; } } /* Chapter index */ if (device.notifications & BIT_N(2)) { uint32_t index; index = iap_get_trackindex(); if (device.track_index != index) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x02); IAP_TX_PUT_U32(index); IAP_TX_PUT_U16(0); IAP_TX_PUT_U16(0xFFFF); device.changed_notifications |= BIT_N(2); iap_send_tx(); device.track_index = index; } } /* Play status */ if (device.notifications & BIT_N(3)) { unsigned char play_status; play_status = audio_status(); if (device.play_status != play_status) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x03); if (play_status & AUDIO_STATUS_PLAY) { /* Playing or paused */ if (play_status & AUDIO_STATUS_PAUSE) { /* Paused */ IAP_TX_PUT(0x02); } else { /* Playing */ IAP_TX_PUT(0x01); } } else { IAP_TX_PUT(0x00); } device.changed_notifications |= BIT_N(3); iap_send_tx(); device.play_status = play_status; } } /* Power/Battery */ if (device.notifications & BIT_N(5)) { unsigned char power_state; unsigned char battery_l; power_state = charger_input_state; battery_l = battery_level(); if ((device.power_state != power_state) || (device.battery_level != battery_l)) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x05); iap_fill_power_state(); device.changed_notifications |= BIT_N(5); iap_send_tx(); device.power_state = power_state; device.battery_level = battery_l; } } /* Equalizer state * This is not handled yet. * * TODO: Fix equalizer handling */ /* Shuffle */ if (device.notifications & BIT_N(7)) { unsigned char shuffle; shuffle = global_settings.playlist_shuffle; if (device.shuffle != shuffle) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x07); IAP_TX_PUT(shuffle?0x01:0x00); device.changed_notifications |= BIT_N(7); iap_send_tx(); device.shuffle = shuffle; } } /* Repeat */ if (device.notifications & BIT_N(8)) { unsigned char repeat; repeat = global_settings.repeat_mode; if (device.repeat != repeat) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x08); switch (repeat) { case REPEAT_OFF: { IAP_TX_PUT(0x00); break; } case REPEAT_ONE: { IAP_TX_PUT(0x01); break; } case REPEAT_ALL: { IAP_TX_PUT(0x02); break; } } device.changed_notifications |= BIT_N(8); iap_send_tx(); device.repeat = repeat; } } /* Date/Time */ if (device.notifications & BIT_N(9)) { struct tm* tm; tm = get_time(); if (memcmp(tm, &(device.datetime), sizeof(struct tm))) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x09); IAP_TX_PUT_U16(tm->tm_year); /* Month */ IAP_TX_PUT(tm->tm_mon+1); /* Day */ IAP_TX_PUT(tm->tm_mday); /* Hour */ IAP_TX_PUT(tm->tm_hour); /* Minute */ IAP_TX_PUT(tm->tm_min); device.changed_notifications |= BIT_N(9); iap_send_tx(); memcpy(&(device.datetime), tm, sizeof(struct tm)); } } /* Alarm * This is not supported yet. * * TODO: Fix alarm handling */ /* Backlight * This is not supported yet. * * TODO: Fix backlight handling */ /* Hold switch */ if (device.notifications & BIT_N(0x0C)) { unsigned char hold; hold = button_hold(); if (device.hold != hold) { IAP_TX_INIT(0x03, 0x09); IAP_TX_PUT(0x0C); IAP_TX_PUT(hold?0x01:0x00); device.changed_notifications |= BIT_N(0x0C); iap_send_tx(); device.hold = hold; } } /* Sound check * This is not supported yet. * * TODO: Fix sound check handling */ /* Audiobook check * This is not supported yet. * * TODO: Fix audiobook handling */ } /* Change the current interface state. * On a change from IST_EXTENDED to IST_STANDARD, or from IST_STANDARD * to IST_EXTENDED, pause playback, if playing */ void iap_interface_state_change(const enum interface_state new) { if (((interface_state == IST_EXTENDED) && (new == IST_STANDARD)) || ((interface_state == IST_STANDARD) && (new == IST_EXTENDED))) { if (audio_status() == AUDIO_STATUS_PLAY) { REMOTE_BUTTON(BUTTON_RC_PLAY); } } interface_state = new; } static void iap_handlepkt_mode5(const unsigned int len, const unsigned char *buf) { (void) len; unsigned int cmd = buf[1]; switch (cmd) { /* Sent from iPod Begin Transmission */ case 0x02: { /* RF Transmitter: Begin High Power transmission */ unsigned char data0[] = {0x05, 0x02}; iap_send_pkt(data0, sizeof(data0)); break; } /* Sent from iPod End High Power Transmission */ case 0x03: { /* RF Transmitter: End High Power transmission */ unsigned char data1[] = {0x05, 0x03}; iap_send_pkt(data1, sizeof(data1)); break; } /* Return Version Number ?*/ case 0x04: { /* do nothing */ break; } } } #if 0 static void iap_handlepkt_mode7(const unsigned int len, const unsigned char *buf) { unsigned int cmd = buf[1]; switch (cmd) { /* RetTunerCaps */ case 0x02: { /* do nothing */ /* GetAccessoryInfo */ unsigned char data[] = {0x00, 0x27, 0x00}; iap_send_pkt(data, sizeof(data)); break; } /* RetTunerFreq */ case 0x0A: /* fall through */ /* TunerSeekDone */ case 0x13: { rmt_tuner_freq(len, buf); break; } /* RdsReadyNotify, RDS station name 0x21 1E 00 + ASCII text*/ case 0x21: { rmt_tuner_rds_data(len, buf); break; } } } #endif void iap_handlepkt(void) { int level; int length; if(!iap_setupflag) return; /* if we are waiting for a remote button to go out, delay the handling of the new packet */ if(iap_repeatbtn) { queue_post(&iap_queue, IAP_EV_MSG_RCVD, 0); sleep(1); return; } /* handle command by mode */ length = get_u16(iap_rxstart); #if defined(LOGF_ENABLE) && defined(ROCKBOX_HAS_LOGF) logf("R: %s", hexstring(iap_rxstart+2, (length))); #endif unsigned char mode = *(iap_rxstart+2); switch (mode) { case 0: iap_handlepkt_mode0(length, iap_rxstart+2); break; #ifdef HAVE_LINE_REC case 1: iap_handlepkt_mode1(length, iap_rxstart+2); break; #endif case 2: iap_handlepkt_mode2(length, iap_rxstart+2); break; case 3: iap_handlepkt_mode3(length, iap_rxstart+2); break; case 4: iap_handlepkt_mode4(length, iap_rxstart+2); break; case 5: iap_handlepkt_mode5(length, iap_rxstart+2); break; /* case 7: iap_handlepkt_mode7(length, iap_rxstart+2); break; */ } /* Remove the handled packet from the RX buffer * This needs to be done with interrupts disabled, to make * sure the buffer and the pointers into it are handled * cleanly */ level = disable_irq_save(); memmove(iap_rxstart, iap_rxstart+(length+2), (RX_BUFLEN+2)-(length+2)); iap_rxnext -= (length+2); iap_rxpayload -= (length+2); iap_rxlen += (length+2); restore_irq(level); /* poke the poweroff timer */ reset_poweroff_timer(); } int remote_control_rx(void) { int btn = iap_remotebtn; if(iap_repeatbtn) iap_repeatbtn--; return btn; } const unsigned char *iap_get_serbuf(void) { return iap_rxstart; } #ifdef IAP_MALLOC_DYNAMIC static int iap_move_callback(int handle, void* current, void* new) { (void) handle; (void) current; iap_txstart = new; iap_txpayload = iap_txstart+5; iap_txnext = iap_txpayload; iap_rxstart = iap_buffers+(TX_BUFLEN+6); return BUFLIB_CB_OK; } #endif /* Change the shuffle state */ void iap_shuffle_state(const bool state) { /* Set shuffle to enabled */ if(state && !global_settings.playlist_shuffle) { global_settings.playlist_shuffle = 1; settings_save(); if (audio_status() & AUDIO_STATUS_PLAY) playlist_randomise(NULL, current_tick, true); } /* Set shuffle to disabled */ else if(!state && global_settings.playlist_shuffle) { global_settings.playlist_shuffle = 0; settings_save(); if (audio_status() & AUDIO_STATUS_PLAY) playlist_sort(NULL, true); } } /* Change the repeat state */ void iap_repeat_state(const unsigned char state) { if (state != global_settings.repeat_mode) { global_settings.repeat_mode = state; settings_save(); if (audio_status() & AUDIO_STATUS_PLAY) audio_flush_and_reload_tracks(); } } void iap_repeat_next(void) { switch (global_settings.repeat_mode) { case REPEAT_OFF: { iap_repeat_state(REPEAT_ALL); break; } case REPEAT_ALL: { iap_repeat_state(REPEAT_ONE); break; } case REPEAT_ONE: { iap_repeat_state(REPEAT_OFF); break; } } } /* This function puts the current power/battery state * into the TX buffer. The buffer is assumed to be initialized */ void iap_fill_power_state(void) { unsigned char power_state; unsigned char battery_l; power_state = charger_input_state; battery_l = battery_level(); if (power_state == NO_CHARGER) { if (battery_l < 30) { IAP_TX_PUT(0x00); } else { IAP_TX_PUT(0x01); } IAP_TX_PUT((char)((battery_l * 255)/100)); } else { IAP_TX_PUT(0x04); IAP_TX_PUT(0x00); } }