/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Driver for WM8975 audio codec * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in December 2005 * * Original file: linux/arch/armnommu/mach-ipod/audio.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "logf.h" #include "system.h" #include "string.h" #include "audio.h" #include "sound.h" #include "wmcodec.h" #include "audiohw.h" const struct sound_settings_info audiohw_settings[] = { [SOUND_VOLUME] = {"dB", 0, 1, -74, 6, -25}, [SOUND_BASS] = {"dB", 0, 1, -6, 9, 0}, [SOUND_TREBLE] = {"dB", 0, 1, -6, 9, 0}, [SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0}, [SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0}, [SOUND_STEREO_WIDTH] = {"%", 0, 5, 0, 250, 100}, #ifdef HAVE_RECORDING [SOUND_LEFT_GAIN] = {"dB", 1, 1, 0, 63, 23}, [SOUND_RIGHT_GAIN] = {"dB", 1, 1, 0, 63, 23}, [SOUND_MIC_GAIN] = {"dB", 1, 1, 0, 63, 0}, #endif }; static unsigned short wm8975_regs[] = { [LINVOL] = LINVOL_LZCEN | 23, /* 0dB */ [RINVOL] = RINVOL_RIVU | RINVOL_RZCEN | 23, /* 0dB */ [DAPCTRL] = DAPCTRL_DACMU, /* This reduces the popping noise during codec powerup noticably, especially with high-impedance loads. We might want to change this for all targets, but it has only been tested on iPod Nano 2G so far. */ #ifdef IPOD_NANO2G [PWRMGMT1] = PWRMGMT1_VMIDSEL_500K | PWRMGMT1_VREF, #else [PWRMGMT1] = PWRMGMT1_VMIDSEL_5K | PWRMGMT1_VREF, #endif [PWRMGMT2] = PWRMGMT2_DACL | PWRMGMT2_DACR | PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1 | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2, }; static void wm8975_write(int reg, unsigned val) { wm8975_regs[reg] = val; wmcodec_write(reg, val); } static void wm8975_write_and(int reg, unsigned bits) { wm8975_write(reg, wm8975_regs[reg] & bits); } static void wm8975_write_or(int reg, unsigned bits) { wm8975_write(reg, wm8975_regs[reg] | bits); } /* convert tenth of dB volume (-730..60) to master volume register value */ int tenthdb2master(int db) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB (0x7f) */ /* 1111001 == 0dB (0x79) */ /* 0110000 == -73dB (0x30 */ /* 0101111..0000000 == mute (0x2f) */ if (db < VOLUME_MIN) { return 0x0; } else { return((db/10)+73+0x30); } } int sound_val2phys(int setting, int value) { int result; switch(setting) { #ifdef HAVE_RECORDING case SOUND_LEFT_GAIN: case SOUND_RIGHT_GAIN: result = ((value - 23) * 15) / 2; break; case SOUND_MIC_GAIN: result = ((value - 23) * 15) / 2 + 200; break; #endif default: result = value; break; } return result; } static void audiohw_mute(bool mute) { if (mute) { /* Set DACMU = 1 to soft-mute the audio DACs. */ wm8975_write_or(DAPCTRL, DAPCTRL_DACMU); } else { /* Set DACMU = 0 to soft-un-mute the audio DACs. */ wm8975_write_and(DAPCTRL, ~DAPCTRL_DACMU); } } #define IPOD_PCM_LEVEL 0x65 /* -6dB */ /* This reduces the popping noise during codec powerup noticably, especially with high-impedance loads. We might want to change this for all targets, but it has only been tested on iPod Nano 2G so far. */ #ifdef IPOD_NANO2G void audiohw_preinit(void) { wmcodec_write(RESET, RESET_RESET); wmcodec_write(AINTFCE, AINTFCE_MS | AINTFCE_LRP_I2S_RLO | AINTFCE_IWL_16BIT | AINTFCE_FORMAT_I2S); #ifndef IPOD_NANO2G wmcodec_write(SAMPCTRL, WM8975_44100HZ); #endif wmcodec_write(LOUTMIX1, LOUTMIX1_LD2LO | LOUTMIX1_LI2LOVOL(5)); wmcodec_write(ROUTMIX2, ROUTMIX2_RD2RO | ROUTMIX2_RI2ROVOL(5)); wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]); wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]); } void audiohw_postinit(void) { wm8975_regs[PWRMGMT1] &= ~PWRMGMT1_VMIDSEL_MASK; wm8975_regs[PWRMGMT1] |= PWRMGMT1_VMIDSEL_50K; wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]); audiohw_mute(false); } #else void audiohw_preinit(void) { /* POWER UP SEQUENCE */ wmcodec_write(RESET, RESET_RESET); /* 2. Enable Vmid and VREF, quick startup. */ wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]); sleep(HZ/50); wm8975_regs[PWRMGMT1] &= ~PWRMGMT1_VMIDSEL_MASK; wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1] | PWRMGMT1_VMIDSEL_50K); /* 4. Enable DACs, line and headphone output buffers as required. */ wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]); wmcodec_write(AINTFCE, AINTFCE_MS | AINTFCE_LRP_I2S_RLO | AINTFCE_IWL_16BIT | AINTFCE_FORMAT_I2S); wm8975_write(DAPCTRL, wm8975_regs[DAPCTRL] ); /* Still need to find out why this is neccessary */ #ifdef IPOD_NANO2G wmcodec_write(SAMPCTRL, 0); #else wmcodec_write(SAMPCTRL, WM8975_44100HZ); #endif /* set the volume to -6dB */ wmcodec_write(LOUT1VOL, LOUT1VOL_LO1ZC | IPOD_PCM_LEVEL); wmcodec_write(ROUT1VOL, ROUT1VOL_RO1VU | ROUT1VOL_RO1ZC | IPOD_PCM_LEVEL); wmcodec_write(LOUTMIX1, LOUTMIX1_LD2LO| LOUTMIX1_LI2LOVOL(5)); wmcodec_write(LOUTMIX2, LOUTMIX2_RI2LOVOL(5)); wmcodec_write(ROUTMIX1, ROUTMIX1_LI2ROVOL(5)); wmcodec_write(ROUTMIX2, ROUTMIX2_RD2RO| ROUTMIX2_RI2ROVOL(5)); wmcodec_write(MOUTMIX1, 0); wmcodec_write(MOUTMIX2, 0); } void audiohw_postinit(void) { audiohw_mute(false); } #endif void audiohw_set_master_vol(int vol_l, int vol_r) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB */ /* 1111001 == 0dB */ /* 0110000 == -73dB */ /* 0101111 == mute (0x2f) */ /* OUT1 */ wmcodec_write(LOUT1VOL, LOUT1VOL_LO1ZC | vol_l); wmcodec_write(ROUT1VOL, ROUT1VOL_RO1VU | ROUT1VOL_RO1ZC | vol_r); } void audiohw_set_lineout_vol(int vol_l, int vol_r) { /* OUT2 */ wmcodec_write(LOUT2VOL, LOUT2VOL_LO2ZC | vol_l); wmcodec_write(ROUT2VOL, ROUT2VOL_RO2VU | ROUT2VOL_RO2ZC | vol_r); } void audiohw_enable_lineout(bool enable) { if (enable) { /* Enable lineout */ wm8975_regs[PWRMGMT2] |= (PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2); } else { /* Disable lineout */ wm8975_regs[PWRMGMT2] &= ~(PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2); } wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]); } void audiohw_set_bass(int value) { const int regvalues[] = { 11, 10, 10, 9, 8, 8, 0xf, 6, 6, 5, 4, 4, 3, 2, 2, 1 }; if ((value >= -6) && (value <= 9)) { /* We use linear bass control with 200 Hz cutoff */ wmcodec_write(BASSCTRL, regvalues[value + 6] | BASSCTRL_BC); } } void audiohw_set_treble(int value) { const int regvalues[] = { 11, 10, 10, 9, 8, 8, 0xf, 6, 6, 5, 4, 4, 3, 2, 2, 1 }; if ((value >= -6) && (value <= 9)) { /* We use linear treble control with 4 kHz cutoff */ wmcodec_write(TREBCTRL, regvalues[value + 6] | TREBCTRL_TC); } } /* Nice shutdown of WM8975 codec */ void audiohw_close(void) { audiohw_mute(true); /* 2. Disable all output buffers. */ wmcodec_write(PWRMGMT2, 0x0); /* 3. Switch off the power supplies. */ wmcodec_write(PWRMGMT1, 0x0); } /* Note: Disable output before calling this function */ void audiohw_set_frequency(int fsel) { (void)fsel; } #ifdef HAVE_RECORDING void audiohw_enable_recording(bool source_mic) { wm8975_regs[PWRMGMT1] |= PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR; wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]); /* NOTE: When switching to digital monitoring we will not want * the DACs disabled. Also the outputs shouldn't be disabled * when recording from line in (dock connector) - needs testing. */ wm8975_regs[PWRMGMT2] &= ~(PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1 | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2); wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]); wm8975_write_or(LINVOL, LINVOL_LINMUTE); wm8975_write_or(RINVOL, RINVOL_RINMUTE); wmcodec_write(ADDCTRL3, ADDCTRL3_VROI); if (source_mic) { wmcodec_write(ADDCTRL1, ADDCTRL1_VSEL_LOWBIAS | ADDCTRL1_DATSEL_RADC | ADDCTRL1_TOEN); wmcodec_write(ADCLPATH, 0); wmcodec_write(ADCRPATH, ADCRPATH_RINSEL_RIN2 | ADCRPATH_RMICBOOST_20dB); } else { wmcodec_write(ADDCTRL1, ADDCTRL1_VSEL_LOWBIAS | ADDCTRL1_DATSEL_NORMAL | ADDCTRL1_TOEN); wmcodec_write(ADCLPATH, ADCLPATH_LINSEL_LIN1 | ADCLPATH_LMICBOOST_OFF); wmcodec_write(ADCRPATH, ADCRPATH_RINSEL_RIN1 | ADCRPATH_RMICBOOST_OFF); } wm8975_write_and(LINVOL, ~LINVOL_LINMUTE); wm8975_write_and(RINVOL, ~RINVOL_RINMUTE); } void audiohw_disable_recording(void) { /* mute inputs */ wm8975_write_or(LINVOL, LINVOL_LINMUTE); wm8975_write_or(RINVOL, RINVOL_RINMUTE); wmcodec_write(ADDCTRL3, 0); wm8975_regs[PWRMGMT2] |= PWRMGMT2_DACL | PWRMGMT2_DACR | PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1 | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2; wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]); wm8975_regs[PWRMGMT1] &= ~(PWRMGMT1_AINL | PWRMGMT1_AINR | PWRMGMT1_ADCL | PWRMGMT1_ADCR); wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]); } void audiohw_set_recvol(int left, int right, int type) { switch (type) { case AUDIO_GAIN_MIC: /* Mic uses right ADC */ wm8975_regs[RINVOL] &= ~RINVOL_MASK; wm8975_write_or(RINVOL, left & RINVOL_MASK); break; case AUDIO_GAIN_LINEIN: wm8975_regs[LINVOL] &= ~LINVOL_MASK; wm8975_write_or(LINVOL, left & LINVOL_MASK); wm8975_regs[RINVOL] &= ~RINVOL_MASK; wm8975_write_or(RINVOL, right & RINVOL_MASK); break; default: return; } } void audiohw_set_monitor(bool enable) { if (enable) { /* set volume to 0 dB */ wm8975_regs[LOUTMIX1] &= ~LOUTMIX1_LI2LOVOL_MASK; wm8975_regs[LOUTMIX1] |= LOUTMIX1_LI2LOVOL(2); wm8975_regs[ROUTMIX2] &= ~ROUTMIX2_RI2ROVOL_MASK; wm8975_regs[ROUTMIX2] |= ROUTMIX2_RI2ROVOL(2); /* set mux to line input */ wm8975_write_and(LOUTMIX1, ~7); wm8975_write_and(ROUTMIX1, ~7); /* enable bypass */ wm8975_write_or(LOUTMIX1, LOUTMIX1_LI2LO); wm8975_write_or(ROUTMIX2, ROUTMIX2_RI2RO); } else { /* disable bypass */ wm8975_write_and(LOUTMIX1, ~LOUTMIX1_LI2LO); wm8975_write_and(ROUTMIX2, ~ROUTMIX2_RI2RO); } } #endif /* HAVE_RECORDING */