/***************************************************************************
*             __________               __   ___.
*   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
*   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
*   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
*   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
*                     \/            \/     \/    \/            \/
* $Id$
*
* Copyright (C) 2007 by Greg White
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "cpu.h"
#include "string.h"
#include "lcd.h"
#include "kernel.h"
#include "lcd-target.h"

#define LCDADDR(x, y) (&lcd_framebuffer[(y)][(x)])

static volatile bool lcd_on = true;
static unsigned lcd_yuv_options = 0;
/*
** This is imported from lcd-16bit.c
*/
extern struct viewport* current_vp;

/* Copies a rectangle from one framebuffer to another. Can be used in
   single transfer mode with width = num pixels, and height = 1 which
   allows a full-width rectangle to be copied more efficiently. */
extern void lcd_copy_buffer_rect(fb_data *dst, const fb_data *src,
                                 int width, int height);

bool lcd_enabled()
{
    return lcd_on;
}

unsigned int LCDBANK(unsigned int address)
{
    return ((address >> 22) & 0xff);
}

unsigned int LCDBASEU(unsigned int address)
{
    return (address & ((1 << 22)-1)) >> 1;
}

unsigned int LCDBASEL(unsigned int address)
{
    address += 320*240*2;
    return (address & ((1 << 22)-1)) >> 1;
}

inline void delay_cycles(volatile int delay)
{
    while(delay>0) delay--;
}

void LCD_CTRL_setup(void)
{
    /* ENVID = 0, BPPMODE = 16 bpp, PNRMODE = TFT, MMODE = Each Frame, CLKVAL = 8 */
    LCDCON1 = 0x878;

    /* VCPW = 1, VFPD = 5, LINEVAL = 319, VBPD = 7 */
    LCDCON2 = 0x74FC141;
    
    /* HFPD = 9, HOZVAL = 239, HBPD = 7 */
    LCDCON3 = 0x38EF09;

    /* HSPW = 7 */
    LCDCON4 = 7;
    
    /* HWSWP = 1, INVVFRAM = 1, INVVLINE = 1, FRM565 = 1, All others = 0 */
    LCDCON5 = 0xB01;

    LCDSADDR1 = (LCDBANK((unsigned)FRAME) << 21) | (LCDBASEU((unsigned)FRAME));
    LCDSADDR2 = LCDBASEL((unsigned)FRAME);
    LCDSADDR3 = 0x000000F0;
}

void LCD_CTRL_clock(bool onoff)
{
    if(onoff)
    {
        GPCCON  &= ~0xFFF000FC;
        GPDCON  &= ~0xFFF0FFF0;

        GPCCON  |= 0xAAA000A8;
        GPCUP   |= 0xFC0E;

        GPDCON  |= 0xAAA0AAA0;
        GPDUP   |= 0xFCFC;

        s3c_regset(&CLKCON, 0x20);  /* enable LCD clock */
        LCDCON1 |=0x01;
    }
    else
    {
        GPCCON  &= ~0xFFF000FC;
        GPCUP   &= ~0xFC0E;

        GPDCON  &= ~0xFFF0FFF0;
        GPDUP   &= ~0xFCFC;

        LCDCON1 &= ~1;              /* Must diable first or bus may freeze */
        s3c_regclr(&CLKCON, 0x20);  /* disable LCD clock */
    }
}

void reset_LCD(bool reset)
{
    GPBCON&=~0xC000;
    GPBCON|=0x4000;
    if(reset)
        GPBDAT|=0x80;
    else
        GPBDAT&=~0x80;
}

void LCD_SPI_send(const unsigned char *array, int count)
{
    while (count--)       
    {
        while ((SPSTA0&0x01)==0){};
        SPTDAT0=*array++;
    }
}

void LCD_SPI_SS(bool select)
{
    delay_cycles(0x4FFF);

    GPBCON&=~0x30000;
    GPBCON|=0x10000;

    if(select)
        GPBDAT|=0x100;
    else 
        GPBDAT&=~0x100;
}

void LCD_SPI_start(void)
{
    s3c_regset(&CLKCON, 0x40000);   /* enable SPI clock */
    LCD_SPI_SS(false);
    SPCON0=0x3E;
    SPPRE0=24;

    reset_LCD(true);
    LCD_SPI_SS(true);
}

void LCD_SPI_stop(void)
{
    LCD_SPI_SS(false);

    SPCON0 &= ~0x10;
    s3c_regclr(&CLKCON, 0x40000);    /* disable SPI clock */  
}

void LCD_SPI_powerdown(void)
{
    const unsigned char powerdncmd[] = 
    {
        0,0x04,1,0x00
    };

    LCD_SPI_start();

    LCD_SPI_send(powerdncmd, sizeof(powerdncmd));

    LCD_SPI_stop();

    reset_LCD(false);   /* This makes a big difference on power */
    LCD_CTRL_clock(false);
} 

void LCD_SPI_powerup(void)
{
    const unsigned char powerupcmd[] = 
    {
        0,0x04,1,0x01
    };

    LCD_CTRL_clock(true);

    LCD_SPI_start();

    LCD_SPI_send(powerupcmd, sizeof(powerupcmd));

    LCD_SPI_stop();
}

void LCD_SPI_init(void)
{
    /* SPI data - Right now we are not sure what each of these SPI writes is 
     *  actually telling the lcd.  Many thanks to Alex Gerchanovsky for 
     *  discovering them.
     *
     * This looks like a register, data combination, 0 denoting a register 
     *  address, 1 denoting data.  Addr 0x04 is used more than once is
     *  an enable.
     */
    const unsigned char initbuf[] = 
    {
        0,0x0F,1,0x01, 
        0,0x09,1,0x06, 
        0,0x16,1,0xA6, 
        0,0x1E,1,0x49, 
        0,0x1F,1,0x26, 
        0,0x0B,1,0x2F, 
        0,0x0C,1,0x2B, 
        0,0x19,1,0x5E, 
        0,0x1A,1,0x15, 
        0,0x1B,1,0x15, 
        0,0x1D,1,0x01, 
        0,0x00,1,0x03, 
        0,0x01,1,0x10, 
        0,0x02,1,0x0A, 
        0,0x06,1,0x04, 
        0,0x08,1,0x2E, 
        0,0x24,1,0x12, 
        0,0x25,1,0x3F,
        0,0x26,1,0x0B, 
        0,0x27,1,0x00,
        0,0x28,1,0x00, 
        0,0x29,1,0xF6, 
        0,0x2A,1,0x03, 
        0,0x2B,1,0x0A, 
        0,0x04,1,0x01,
    };

    LCD_CTRL_clock(true);

    LCD_SPI_start();

    LCD_SPI_send(initbuf, sizeof(initbuf));

    LCD_SPI_stop(); 
}

/* LCD init */
void lcd_init_device(void)
{
    /* Set pins up */

    GPHUP   &= 0x600;

    GPECON  |= 0x0A800000;
    GPEUP   |= 0x3800;

    GPBUP   |= 0x181;

    s3c_regset(&CLKCON, 0x20);       /* enable LCD clock */

    LCD_CTRL_setup();
    LCD_SPI_init();
}

void lcd_enable(bool state)
{
    if(state)
    {
        if(!lcd_on)
        {
            lcd_on = true;
            lcd_update();
            LCD_SPI_powerup();
        }
    }
    else 
    {
        if(lcd_on) {
            lcd_on = false;
            LCD_SPI_powerdown();
        }
    }
}

/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height)
{
    fb_data *dst, *src;

    if (!lcd_on)
        return;

    if (x + width > LCD_WIDTH)
        width = LCD_WIDTH - x; /* Clip right */
    if (x < 0)
        width += x, x = 0; /* Clip left */
    if (width <= 0)
        return; /* nothing left to do */

    if (y + height > LCD_HEIGHT)
        height = LCD_HEIGHT - y; /* Clip bottom */
    if (y < 0)
        height += y, y = 0; /* Clip top */
    if (height <= 0)
        return; /* nothing left to do */

    /* TODO: It may be faster to swap the addresses of lcd_driver_framebuffer
     * and lcd_framebuffer */
    dst = (fb_data *)FRAME + LCD_WIDTH*y + x;
    src = &lcd_framebuffer[y][x];

    /* Copy part of the Rockbox framebuffer to the second framebuffer */
    if (width < LCD_WIDTH)
    {
        /* Not full width - do line-by-line */
        lcd_copy_buffer_rect(dst, src, width, height);
    }
    else
    {
        /* Full width - copy as one line */
        lcd_copy_buffer_rect(dst, src, LCD_WIDTH*height, 1);
    }
}

/* Update the display.
   This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
    if (!lcd_on)
        return;

    lcd_copy_buffer_rect((fb_data *)FRAME, &lcd_framebuffer[0][0],
                         LCD_WIDTH*LCD_HEIGHT, 1);
}

void lcd_bitmap_transparent_part(const fb_data *src, int src_x, int src_y,
                                 int stride, int x, int y, int width,
                                 int height)
{
    int w, px;
    fb_data *dst;

    if (x + width > current_vp->width)
        width = current_vp->width - x; /* Clip right */
    if (x < 0)
        width += x, x = 0; /* Clip left */
    if (width <= 0)
        return; /* nothing left to do */

    if (y + height > current_vp->height)
        height = current_vp->height - y; /* Clip bottom */
    if (y < 0)
        height += y, y = 0; /* Clip top */
    if (height <= 0)
        return; /* nothing left to do */

    src += stride * src_y + src_x; /* move starting point */
    dst = &lcd_framebuffer[current_vp->y+y][current_vp->x+x];

    asm volatile (
    ".rowstart:                             \r\n"
        "mov    %[w], %[width]              \r\n" /* Load width for inner loop */
    ".nextpixel:                            \r\n"
        "ldrh   %[px], [%[s]], #2           \r\n" /* Load src pixel */
        "add    %[d], %[d], #2              \r\n" /* Uncoditionally increment dst */
        "cmp    %[px], %[fgcolor]           \r\n" /* Compare to foreground color */
        "streqh %[fgpat], [%[d], #-2]       \r\n" /* Store foregroud if match */
        "cmpne  %[px], %[transcolor]        \r\n" /* Compare to transparent color */
        "strneh %[px], [%[d], #-2]          \r\n" /* Store dst if not transparent */
        "subs   %[w], %[w], #1              \r\n" /* Width counter has run down? */
        "bgt    .nextpixel                  \r\n" /* More in this row? */
        "add    %[s], %[s], %[sstp], lsl #1 \r\n" /* Skip over to start of next line */
        "add    %[d], %[d], %[dstp], lsl #1 \r\n"
        "subs   %[h], %[h], #1              \r\n" /* Height counter has run down? */
        "bgt    .rowstart                   \r\n" /* More rows? */
        : [w]"=&r"(w), [h]"+&r"(height), [px]"=&r"(px),
          [s]"+&r"(src), [d]"+&r"(dst)
        : [width]"r"(width),
          [sstp]"r"(stride - width),
          [dstp]"r"(LCD_WIDTH - width),
          [transcolor]"r"(TRANSPARENT_COLOR),
          [fgcolor]"r"(REPLACEWITHFG_COLOR),
          [fgpat]"r"(current_vp->fg_pattern)
    );
}

void lcd_yuv_set_options(unsigned options)
{
    lcd_yuv_options = options;
}

/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
extern void lcd_write_yuv420_lines(fb_data *dst,
                                   unsigned char const * const src[3],
                                   int width,
                                   int stride);
extern void lcd_write_yuv420_lines_odither(fb_data *dst,
                                           unsigned char const * const src[3],
                                           int width,
                                           int stride,
                                           int x_screen, /* To align dither pattern */
                                           int y_screen);
/* Performance function to blit a YUV bitmap directly to the LCD */
/* For the Gigabeat - show it rotated */
/* So the LCD_WIDTH is now the height */
void lcd_blit_yuv(unsigned char * const src[3],
                  int src_x, int src_y, int stride,
                  int x, int y, int width, int height)
{
    /* Caches for chroma data so it only need be recaculated every other
       line */
    unsigned char const * yuv_src[3];
    off_t z;

    if (!lcd_on)
        return;

    /* Sorry, but width and height must be >= 2 or else */
    width &= ~1;
    height >>= 1;

    y = LCD_WIDTH - 1 - y;
    fb_data *dst = (fb_data*)FRAME + x * LCD_WIDTH + y;

    z = stride*src_y;
    yuv_src[0] = src[0] + z + src_x;
    yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
    yuv_src[2] = src[2] + (yuv_src[1] - src[1]);

    if (lcd_yuv_options & LCD_YUV_DITHER)
    {
        do
        {
            lcd_write_yuv420_lines_odither(dst, yuv_src, width, stride, y, x);
            yuv_src[0] += stride << 1; /* Skip down two luma lines */
            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
            yuv_src[2] += stride >> 1;
            dst -= 2;
            y -= 2;
        }
        while (--height > 0);
    }
    else
    {
        do
        {
            lcd_write_yuv420_lines(dst, yuv_src, width, stride);
            yuv_src[0] += stride << 1; /* Skip down two luma lines */
            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
            yuv_src[2] += stride >> 1;
            dst -= 2;
        }
        while (--height > 0);
    }
}

void lcd_set_contrast(int val) {
  (void) val;
  // TODO:
}

void lcd_set_invert_display(bool yesno) {
  (void) yesno;
  // TODO:
}

void lcd_set_flip(bool yesno) {
  (void) yesno;
  // TODO:
}