/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Michael Sevakis * Based on lcd_write_data for H300 in lcd.S * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" .section .icode,"ax",@progbits /* begin lcd_write_yuv420_lines * * See http://en.wikipedia.org/wiki/YCbCr * ITU-R BT.601 (formerly CCIR 601): * |Y'| | 0.299000 0.587000 0.114000| |R| * |Pb| = |-0.168736 -0.331264 0.500000| |G| or 0.564334*(B - Y') * |Pr| | 0.500000 -0.418688 0.081312| |B| or 0.713267*(R - Y') * Scaled, normalized and rounded: * |Y'| | 65 129 25| |R| + 16 : 16->235 * |Cb| = |-38 -74 112| |G| + 128 : 16->240 * |Cr| |112 -94 -18| |B| + 128 : 16->240 * * The inverse: * |R| |1.000000 -0.000001 1.402000| |Y'| * |G| = |1.000000 -0.334136 -0.714136| |Pb| * |B| |1.000000 1.772000 0.000000| |Pr| * Scaled, normalized, rounded and tweaked to yield RGB 666: * |R| |74 0 101| |Y' - 16| / 256 * |G| = |74 -24 -51| |Cb - 128| / 256 * |B| |74 128 0| |Cr - 128| / 256 */ .align 2 .global lcd_write_yuv420_lines .type lcd_write_yuv420_lines,@function lcd_write_yuv420_lines: lea.l (-36,%sp),%sp /* free up some registers */ movem.l %d2-%d6/%a2-%a5,(%sp) lea.l 0xf0008002,%a0 /* LCD data port */ movem.l (36+4,%sp),%a1-%a5 /* Y data, Cb data, guv storage, Cr data, width */ lea.l (%a1,%a5),%a5 /* end address */ .yuv_line_loop1: /** Write first pixel **/ clr.l %d1 /* get bu component */ move.b (%a2),%d1 clr.l %d3 /* get rv component */ move.b (%a4),%d3 moveq.l #-128,%d0 add.l %d0,%d1 add.l %d0,%d3 move.l %d1,%d2 /* %d2 = cb component for guv */ asr.l #1,%d1 /* %d1 = 128 * (Cb - 128) / 256 */ move.b %d1,(%a2)+ /* save bu for next line */ moveq.l #-24,%d0 /* multiply first term of guv */ muls.w %d0,%d2 moveq.l #-51,%d0 /* multiply second term of guv */ muls.w %d3,%d0 add.l %d0,%d2 asr.l #8,%d2 move.b %d2,(%a3)+ /* save guv for next line */ moveq.l #101,%d0 muls.w %d0,%d3 asr.l #8,%d3 move.b %d3,(%a4)+ /* save rv for next line */ clr.l %d4 /* get y component */ move.b (%a1)+,%d4 moveq.l #74,%d0 muls.w %d0,%d4 asr.l #8,%d4 subq.l #4,%d4 move.l %d4,%d5 move.l %d4,%d6 /* : %d4,%d5,%d6 = Y, %d1 = bu, %d2 = guv, %d3 = rv */ add.l %d3,%d4 /* get r */ add.l %d2,%d5 /* get g */ add.l %d1,%d6 /* get b */ move.l %d6,%d0 /* is clamping needed? */ or.l %d5,%d0 or.l %d4,%d0 asr.l #6,%d0 beq.b .yuv_no_clamp1 /* values in range: skip clamping */ moveq.l #63, %d0 cmp.l %d0, %d4 bls.s .yuv_red_ok1 spl.b %d4 and.l %d0, %d4 .yuv_red_ok1: cmp.l %d0, %d5 bls.s .yuv_green_ok1 spl.b %d5 and.l %d0, %d5 .yuv_green_ok1: cmp.l %d0, %d6 bls.s .yuv_blue_ok1 spl.b %d6 and.l %d0, %d6 .yuv_blue_ok1: .yuv_no_clamp1: /* : %d4 = R, %d5 = G, %d6 = B */ move.l %d5,%d0 /* save g for lower 9 bits */ lsl.l #3,%d4 /* R << 3 */ lsr.l #3,%d0 /* G >> 3 */ or.l %d4,%d0 move.w %d0,(%a0) /* |00000000|000000000|0000000r|rrrrrggg| */ lsl.l #6,%d5 /* B << 6 */ or.l %d5,%d6 /* |00000000|000000000|0000gggg|ggbbbbbb| */ move.w %d6,(%a0) /** Write second pixel **/ clr.l %d4 move.b (%a1)+,%d4 /* get y component */ moveq.l #74,%d0 muls.w %d0,%d4 asr.l #8,%d4 subq.l #4,%d4 /* : %d4 = Y, %d1 = bu, %d2 = guv, %d3 = rv */ /* Add Y + each chroma component (can clobber %d1-%d3 values now) */ add.l %d4,%d3 /* get r */ add.l %d4,%d2 /* get g */ add.l %d4,%d1 /* get b */ move.l %d1,%d0 /* is clamping needed? */ or.l %d2,%d0 or.l %d3,%d0 asr.l #6,%d0 beq.b .yuv_no_clamp2 /* values in range: skip clamping */ moveq.l #63, %d0 cmp.l %d0, %d3 bls.s .yuv_red_ok2 spl.b %d3 and.l %d0, %d3 .yuv_red_ok2: cmp.l %d0, %d2 bls.s .yuv_green_ok2 spl.b %d2 and.l %d0, %d2 .yuv_green_ok2: cmp.l %d0, %d1 bls.s .yuv_blue_ok2 spl.b %d1 and.l %d0, %d1 .yuv_blue_ok2: .yuv_no_clamp2: /* : %d3 = R, %d2 = G, %d1 = B */ move.l %d2,%d0 /* save g for lower 9 bits */ lsl.l #3,%d3 /* R << 3 */ lsr.l #3,%d0 /* G >> 3 */ or.l %d3,%d0 /* |00000000|000000000|0000000r|rrrrrggg| */ move.w %d0,(%a0) lsl.l #6,%d2 /* G << 6 */ or.l %d2,%d1 /* |00000000|000000000|0000gggg|ggbbbbbb| */ move.w %d1,(%a0) cmp.l %a1,%a5 /* run %a1 up to end of line */ bhi.w .yuv_line_loop1 /* Rewind chroma pointers */ movem.l (36+8, %sp), %a2-%a5 /* bu data, guv data, rv data, width */ lea.l (%a1, %a5), %a5 /* next end address */ .yuv_line_loop2: move.b (%a2)+,%d1 /* read save chromas and sign extend */ extb.l %d1 move.b (%a3)+,%d2 extb.l %d2 move.b (%a4)+,%d3 extb.l %d3 clr.l %d4 move.b (%a1)+,%d4 /* get y component */ moveq.l #74,%d0 muls.w %d0,%d4 asr.l #8,%d4 subq.l #4,%d4 move.l %d4,%d5 move.l %d4,%d6 /* : %d4,%d5,%d6 = Y, %d1 = bu, %d2 = guv, %d3 = rv */ add.l %d3,%d4 /* get r */ add.l %d2,%d5 /* get g */ add.l %d1,%d6 /* get b */ move.l %d6,%d0 /* is clamping needed? */ or.l %d5,%d0 or.l %d4,%d0 asr.l #6,%d0 beq.b .yuv_no_clamp3 /* values in range: skip clamping */ moveq.l #63, %d0 cmp.l %d0, %d4 bls.s .yuv_red_ok3 spl.b %d4 and.l %d0, %d4 .yuv_red_ok3: cmp.l %d0, %d5 bls.s .yuv_green_ok3 spl.b %d5 and.l %d0, %d5 .yuv_green_ok3: cmp.l %d0, %d6 bls.s .yuv_blue_ok3 spl.b %d6 and.l %d0, %d6 .yuv_blue_ok3: .yuv_no_clamp3: /* : %d4 = R, %d5 = G, %d6 = B */ move.l %d5,%d0 /* save g for lower 9 bits */ lsl.l #3,%d4 /* R << 3 */ lsr.l #3,%d0 /* G >> 3 */ or.l %d4,%d0 move.w %d0,(%a0) /* |00000000|000000000|0000000r|rrrrrggg| */ lsl.l #6,%d5 /* B << 6 */ or.l %d5,%d6 /* |00000000|000000000|0000gggg|ggbbbbbb| */ move.w %d6,(%a0) /** Write second pixel **/ clr.l %d4 move.b (%a1)+,%d4 /* get y component */ moveq.l #74,%d0 muls.w %d0,%d4 asr.l #8,%d4 subq.l #4,%d4 /* : %d4 = Y, %d1 = bu, %d2 = guv, %d3 = rv */ /* Add Y + each chroma component (can clobber %d1-%d3 values now) */ add.l %d4,%d3 /* get r */ add.l %d4,%d2 /* get g */ add.l %d4,%d1 /* get b */ move.l %d1,%d0 /* is clamping needed? */ or.l %d2,%d0 or.l %d3,%d0 asr.l #6,%d0 beq.b .yuv_no_clamp4 /* values in range: skip clamping */ moveq.l #63, %d0 cmp.l %d0, %d3 bls.s .yuv_red_ok4 spl.b %d3 and.l %d0, %d3 .yuv_red_ok4: cmp.l %d0, %d2 bls.s .yuv_green_ok4 spl.b %d2 and.l %d0, %d2 .yuv_green_ok4: cmp.l %d0, %d1 bls.s .yuv_blue_ok4 spl.b %d1 and.l %d0, %d1 .yuv_blue_ok4: .yuv_no_clamp4: /* : %d3 = R, %d2 = G, %d1 = B */ move.l %d2,%d0 /* save g for lower 9 bits */ lsl.l #3,%d3 /* R << 3 */ lsr.l #3,%d0 /* G >> 3 */ or.l %d3,%d0 /* |00000000|000000000|0000000r|rrrrrggg| */ move.w %d0,(%a0) lsl.l #6,%d2 /* G << 6 */ or.l %d2,%d1 /* |00000000|000000000|0000gggg|ggbbbbbb| */ move.w %d1,(%a0) cmp.l %a1,%a5 /* run %a0 up to end of line */ bhi.w .yuv_line_loop2 movem.l (%sp),%d2-%d6/%a2-%a5 lea.l (36,%sp),%sp /* restore registers */ rts /* end lcd_write_yuv420_lines */ /* begin lcd_write_data */ .align 2 .global lcd_write_data .type lcd_write_data,@function lcd_write_data: move.l (4,%sp),%a0 /* data pointer */ move.l (8,%sp),%d0 /* length in words */ add.l %d0,%d0 /* words -> bytes */ add.l %a0,%d0 /* -> end address */ lea.l 0xf0008002,%a1 /* LCD data port */ lea.l (-24,%sp),%sp /* free up some registers */ movem.l %d2-%d6/%a2,(%sp) move.l %a0,%d1 btst.l #1,%d1 /* already longword aligned? */ beq.b .wd_wordl_end /* yes: skip initial word copy */ /* transfer initial word */ move.w (%a0)+,%d1 /* |????????|????????|rrrrrggg|gggbbbbb| */ move.l %d1,%d2 and.l #0xfffff800,%d2 /* |????????|????????|rrrrr000|00000000| */ add.l %d2,%d1 /* |????????|???????r|rrrr0ggg|gggbbbbb| */ move.l %d1,%d2 lsr.l #8,%d1 /* |00000000|????????|???????r|rrrr0ggg| */ move.w %d1,(%a1) lsl.l #1,%d2 /* |????????|??????rr|rrr0gggg|ggbbbbb0| */ move.w %d2,(%a1) .wd_wordl_end: /* now longword aligned */ moveq.l #28,%d1 add.l %a0,%d1 and.l #0xFFFFFFF0,%d1 /* %d1 = second line bound */ cmp.l %d1,%d0 /* at least one full line to send? */ blo.w .wd_long2_start /* no: skip to trailing longword handling */ subq.l #8,%d1 subq.l #8,%d1 /* %d1 = first line bound */ cmp.l %a0,%d1 /* any leading longwords? */ bls.b .wd_long1_end /* no: skip leading long loop */ .wd_long1_loop: move.l (%a0)+,%d2 /* read longword */ swap %d2 /* unstuff two pixels and correct order */ move.l %d2,%d5 and.l #0xff00ff00,%d5 /* |rrrrrggg|00000000|rrrrrggg|00000000| */ eor.l %d5,%d2 /* |00000000|gggbbbbb|00000000|gggbbbbb| */ lsr.l #8,%d5 /* |00000000|rrrrrggg|00000000|rrrrrggg| */ move.l %d5,%d6 and.l #0x00f800f8,%d5 /* |00000000|rrrrr000|00000000|rrrrr000| */ add.l %d6,%d5 /* |0000000r|rrrr0ggg|0000000r|rrrr0ggg| */ move.w %d5,(%a1) lsl.l #1,%d2 /* |0000000g|ggbbbbb0|0000000g|ggbbbbb0| */ move.w %d2,(%a1) swap %d5 move.w %d5,(%a1) swap %d2 move.w %d2,(%a1) cmp.l %a0,%d1 bhi.b .wd_long1_loop .wd_long1_end: move.l %d0,%a2 lea.l (-14,%a2),%a2 .wd_line_loop: movem.l (%a0),%d1-%d4 /* burst-read eight words */ lea.l (16,%a0),%a0 /* increment address */ /* transfer four pairs of longs to display */ /* same procedure for each as in leading long loop */ swap %d1 move.l %d1,%d5 and.l #0xff00ff00,%d5 eor.l %d5,%d1 lsr.l #8,%d5 move.l %d5,%d6 and.l #0x00f800f8,%d5 add.l %d6,%d5 move.w %d5,(%a1) lsl.l #1,%d1 move.w %d1,(%a1) swap %d5 move.w %d5,(%a1) swap %d1 move.w %d1,(%a1) swap %d2 move.l %d2,%d5 and.l #0xff00ff00,%d5 eor.l %d5,%d2 lsr.l #8,%d5 move.l %d5,%d6 and.l #0x00f800f8,%d5 add.l %d6,%d5 move.w %d5,(%a1) lsl.l #1,%d2 move.w %d2,(%a1) swap %d5 move.w %d5,(%a1) swap %d2 move.w %d2,(%a1) swap %d3 move.l %d3,%d5 and.l #0xff00ff00,%d5 eor.l %d5,%d3 lsr.l #8,%d5 move.l %d5,%d6 and.l #0x00f800f8,%d5 add.l %d6,%d5 move.w %d5,(%a1) lsl.l #1,%d3 move.w %d3,(%a1) swap %d5 move.w %d5,(%a1) swap %d3 move.w %d3,(%a1) swap %d4 move.l %d4,%d5 and.l #0xff00ff00,%d5 eor.l %d5,%d4 lsr.l #8,%d5 move.l %d5,%d6 and.l #0x00f800f8,%d5 add.l %d6,%d5 move.w %d5,(%a1) lsl.l #1,%d4 move.w %d4,(%a1) swap %d5 move.w %d5,(%a1) swap %d4 move.w %d4,(%a1) cmp.l %a0,%a2 /* run %a0 up to last line bound */ bhi.w .wd_line_loop .wd_long2_start: subq.l #2,%d0 /* account for handling 2 words per loop */ cmp.l %a0,%d0 /* any (trailing longwords? */ bls.b .wd_long2_end /* no: skip trailing longword loop */ .wd_long2_loop: move.l (%a0)+,%d2 /* read longword */ swap %d2 move.l %d2,%d5 and.l #0xff00ff00,%d5 eor.l %d5,%d2 lsr.l #8,%d5 move.l %d5,%d6 and.l #0x00f800f8,%d5 add.l %d6,%d5 move.w %d5,(%a1) lsl.l #1,%d2 move.w %d2,(%a1) swap %d5 move.w %d5,(%a1) swap %d2 move.w %d2,(%a1) cmp.l %a0,%d0 /* run %a0 up to last long bound */ bhi.b .wd_long2_loop .wd_long2_end: blo.b .wd_word2_end /* no final word: skip */ move.w (%a0),%d1 /* transfer final word */ move.l %d1,%d2 and.l #0xfffff800,%d2 add.l %d2,%d1 move.l %d1,%d2 lsr.l #8,%d1 move.w %d1,(%a1) lsl.l #1,%d2 move.w %d2,(%a1) .wd_word2_end: movem.l (%sp),%d2-%d6/%a2 lea.l (24,%sp),%sp /* restore registers */ rts /* end lcd_write_data */