/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id: $ * * Copyright (C) 2011 by Tomasz Moń * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "system.h" #include #include "gcc_extensions.h" #include "panic.h" #include "dma-target.h" #include "ata_idle_notify.h" //#define SD_DEBUG #ifdef SD_DEBUG #include "lcd-target.h" #include "lcd.h" #include "font.h" #ifdef BOOTLOADER #include "common.h" #else #include "debug.h" #endif #endif #include "sdmmc.h" #include "system-target.h" #include "storage.h" /* The configuration method is not very flexible. */ #define CARD_NUM_SLOT 1 #define NUM_CARDS 2 #define EC_OK 0 #define EC_FAILED 1 #define EC_NOCARD 2 #define EC_WAIT_STATE_FAILED 3 #define EC_POWER_UP 4 #define EC_FIFO_WR_EMPTY 5 #define EC_FIFO_WR_DONE 6 #define EC_TRAN_READ_ENTRY 7 #define EC_TRAN_READ_EXIT 8 #define EC_TRAN_WRITE_ENTRY 9 #define EC_TRAN_WRITE_EXIT 10 #define EC_COMMAND 11 #define EC_WRITE_PROTECT 12 #define EC_DATA_TIMEOUT 13 #define EC_RESP_TIMEOUT 14 #define EC_CRC_ERROR 15 #define NUM_EC 16 #define MIN_YIELD_PERIOD 5 #define UNALIGNED_NUM_SECTORS 10 #define MAX_TRANSFER_ERRORS 10 #define BLOCKS_PER_BANK 0x7A7800 /* command flags for send_cmd */ #define SDHC_RESP_FMT_NONE 0x0000 #define SDHC_RESP_FMT_1 0x0200 #define SDHC_RESP_FMT_2 0x0400 #define SDHC_RESP_FMT_3 0x0600 #define INITIAL_CLK 312500 /* Initial clock */ #define SD_CLK 24000000 /* Clock for SD cards */ #define MMC_CLK 15000000 /* Clock for MMC cards */ #ifdef SD_DEBUG #ifdef BOOTLOADER #define dbgprintf printf #else #define dbgprintf DEBUGF #endif #else #define dbgprintf(...) #endif struct sd_card_status { int retry; int retry_max; }; /** static, private data **/ /* for compatibility */ static long last_disk_activity = -1; static bool initialized = false; static bool sd_enabled = false; static long next_yield = 0; static tCardInfo card_info [NUM_CARDS]; static tCardInfo *currcard; static struct sd_card_status sd_status[NUM_CARDS] = { #if NUM_CARDS > 1 {0, 10}, #endif {0, 10} }; /* Shoot for around 75% usage */ static struct mutex sd_mtx SHAREDBSS_ATTR; static volatile unsigned int transfer_error[NUM_DRIVES]; /* align on cache line size */ static unsigned char aligned_buffer[UNALIGNED_NUM_SECTORS * SD_BLOCK_SIZE] __attribute__((aligned(32))); static void sd_card_mux(int card_no) { #ifdef HAVE_MULTIDRIVE #ifdef SANSA_CONNECT /* GIO6 - select Card; GIO5 - select iNAND (both active low) */ if (card_no == CARD_NUM_SLOT) { IO_GIO_BITSET0 = (1 << 5); /* deselect iNAND (GIO5) */ IO_GIO_BITCLR0 = (1 << 6); /* select card (GIO6) */ } else { IO_GIO_BITSET0 = (1 << 6); /* deselect card (GIO6) */ IO_GIO_BITCLR0 = (1 << 5); /* select iNAND (GIO5) */ } #else /* Different players */ (void)card_no; #endif #else /* No multidrive */ (void)card_no; #endif } static inline void enable_controller(bool on) { sd_enabled = on; } void sd_enable(bool on) { mutex_lock(&sd_mtx); enable_controller(on); mutex_unlock(&sd_mtx); } /* sets clock rate just like OF does */ static void sd_set_clock_rate(unsigned long rate) { unsigned char rate_val = 0; if (rate == INITIAL_CLK) { rate_val = 0x3B; } else if (rate > INITIAL_CLK) { rate_val = 0; } else { rate_val = 0xFF; } IO_MMC_MEM_CLK_CONTROL = (IO_MMC_MEM_CLK_CONTROL & 0xFF00) | rate_val; } static int sd_poll_status(int st_reg_num, volatile unsigned int flag) { unsigned int status; unsigned int status1; bool done; do { long time = current_tick; if (TIME_AFTER(time, next_yield)) { long ty = current_tick; yield(); next_yield = ty + MIN_YIELD_PERIOD; } status = IO_MMC_STATUS0; status1 = IO_MMC_STATUS1; if (status & MMC_ST0_CMD_TIMEOUT) { dbgprintf("CMD timeout"); return -EC_RESP_TIMEOUT; } if (status & MMC_ST0_DATA_TIMEOUT) { dbgprintf("DATA timeout"); return -EC_DATA_TIMEOUT; } if (status & (MMC_ST0_WR_CRCERR | MMC_ST0_RD_CRCERR | MMC_ST0_RESP_CRCERR)) { dbgprintf("CRC error"); return -EC_CRC_ERROR; } if (st_reg_num == 0) { done = status & flag; } else { done = status1 & flag; } } while (!done); return EC_OK; } static int dma_wait_for_completion(void) { unsigned short dma_status; do { long time = current_tick; if (TIME_AFTER(time, next_yield)) { long ty = current_tick; yield(); next_yield = ty + MIN_YIELD_PERIOD; } dma_status = IO_MMC_SD_DMA_STATUS1; if (dma_status & (1 << 13)) { return -EC_DATA_TIMEOUT; } } while (dma_status & (1 << 12)); return EC_OK; } static int sd_command(int cmd, unsigned long arg, int cmdat, unsigned long *response) { int ret; /* Clear response registers */ IO_MMC_RESPONSE0 = 0; IO_MMC_RESPONSE1 = 0; IO_MMC_RESPONSE2 = 0; IO_MMC_RESPONSE3 = 0; IO_MMC_RESPONSE4 = 0; IO_MMC_RESPONSE5 = 0; IO_MMC_RESPONSE6 = 0; IO_MMC_RESPONSE7 = 0; IO_MMC_COMMAND_INDEX = 0; IO_MMC_SPI_DATA = 0; IO_MMC_ARG_LOW = (unsigned int)((arg & 0xFFFF)); IO_MMC_ARG_HI = (unsigned int)((arg & 0xFFFF0000) >> 16); /* SD is always in push-pull mode */ cmdat |= MMC_CMD_PPLEN; cmdat |= (cmd & MMC_CMD_CMD_MASK); if (cmdat & MMC_CMD_DATA) cmdat |= MMC_CMD_DCLR; IO_MMC_COMMAND = cmdat; if (cmdat & MMC_CMD_DATA) { /* Command requires data - do not wait for RSPDNE */ ret = EC_OK; } else { ret = sd_poll_status(0, MMC_ST0_RSPDNE); } if (ret != EC_OK) { dbgprintf("Command failed (ret %d)", ret); return ret; } if (response == NULL) { /* discard response */ } else if ((cmdat & SDHC_RESP_FMT_1) || (cmdat & SDHC_RESP_FMT_3)) { response[0] = (IO_MMC_RESPONSE7 << 16) | IO_MMC_RESPONSE6; } else if (cmdat & SDHC_RESP_FMT_2) { response[0] = (IO_MMC_RESPONSE7 << 16) | IO_MMC_RESPONSE6; response[1] = (IO_MMC_RESPONSE5 << 16) | IO_MMC_RESPONSE4; response[2] = (IO_MMC_RESPONSE3 << 16) | IO_MMC_RESPONSE2; response[3] = (IO_MMC_RESPONSE1 << 16) | IO_MMC_RESPONSE0; } return 0; } static int sd_init_card(const int card_no) { bool sdhc = false; unsigned long response[4]; int ret; int i; memset(currcard, 0, sizeof(*currcard)); sd_card_mux(card_no); /* Set data bus width to 1 bit */ bitclr16(&IO_MMC_CONTROL, MMC_CTRL_WIDTH); sd_set_clock_rate(INITIAL_CLK); /* Prevent controller lock */ udelay(100); ret = sd_command(SD_GO_IDLE_STATE, 0, MMC_CMD_INITCLK, NULL); if (ret < 0) return -1; ret = sd_command(SD_SEND_IF_COND, 0x1AA, SDHC_RESP_FMT_3, response); if ((response[0] & 0xFFF) == 0x1AA) { sdhc = true; dbgprintf("found sdhc card"); } while ((currcard->ocr & (1 << 31)) == 0) /* until card is powered up */ { ret = sd_command(SD_APP_CMD, currcard->rca, SDHC_RESP_FMT_1, NULL); if (ret < 0) { dbgprintf("SD_APP_CMD failed"); return -1; } ret = sd_command(SD_APP_OP_COND, (1 << 20) /* 3.2-3.3V */ | (1 << 21) /* 3.3-3.4V */ | (sdhc ? (1 << 30) : 0), SDHC_RESP_FMT_3, &currcard->ocr); if (ret < 0) { dbgprintf("SD_APP_OP_COND failed"); return -1; } } dbgprintf("Card powered up"); ret = sd_command(SD_ALL_SEND_CID, 0, SDHC_RESP_FMT_2, response); if (ret < 0) { dbgprintf("SD_ALL_SEND_CID failed"); return -1; } for (i = 0; i<4; i++) { currcard->cid[i] = response[i]; } ret = sd_command(SD_SEND_RELATIVE_ADDR, 0, SDHC_RESP_FMT_1, &currcard->rca); if (ret < 0) { dbgprintf("SD_SEND_RELATIVE_ADDR failed"); return -1; } ret = sd_command(SD_SEND_CSD, currcard->rca, SDHC_RESP_FMT_2, response); if (ret < 0) { dbgprintf("SD_SEND_CSD failed"); return -1; } for (i = 0; i<4; i++) { currcard->csd[i] = response[i]; } sd_parse_csd(currcard); sd_set_clock_rate(currcard->speed); /* Prevent controller lock */ udelay(100); ret = sd_command(SD_SELECT_CARD, currcard->rca, SDHC_RESP_FMT_1, NULL); if (ret < 0) { dbgprintf("SD_SELECT_CARD failed"); return -1; } ret = sd_command(SD_APP_CMD, currcard->rca, SDHC_RESP_FMT_1, NULL); if (ret < 0) { dbgprintf("SD_APP_CMD failed"); return -1; } ret = sd_command(SD_SET_BUS_WIDTH, currcard->rca | 2, SDHC_RESP_FMT_1, NULL); /* 4 bit */ if (ret < 0) { dbgprintf("SD_SET_BUS_WIDTH failed"); return -1; } /* Set data bus width to 4 bits */ bitset16(&IO_MMC_CONTROL, MMC_CTRL_WIDTH); ret = sd_command(SD_SET_BLOCKLEN, currcard->blocksize, SDHC_RESP_FMT_1, NULL); if (ret < 0) { dbgprintf("SD_SET_BLOCKLEN failed"); return -1; } IO_MMC_BLOCK_LENGTH = currcard->blocksize; dbgprintf("Card initialized"); currcard->initialized = 1; return EC_OK; } /* lock must already by aquired */ static void sd_select_device(int card_no) { currcard = &card_info[card_no]; if (card_no == 0) { /* Main card always gets a chance */ sd_status[0].retry = 0; } if (currcard->initialized > 0) { /* This card is already initialized - switch to it */ sd_card_mux(card_no); return; } if (currcard->initialized == 0) { /* Card needs (re)init */ sd_init_card(card_no); } } static inline bool card_detect_target(void) { #ifdef SANSA_CONNECT bool removed; removed = IO_GIO_BITSET0 & (1 << 14); return !removed; #else return false; #endif } #ifdef HAVE_HOTSWAP static int sd1_oneshot_callback(struct timeout *tmo) { /* This is called only if the state was stable for 300ms - check state * and post appropriate event. */ queue_broadcast(card_detect_target() ? SYS_HOTSWAP_INSERTED : SYS_HOTSWAP_EXTRACTED, CARD_NUM_SLOT); return 0; (void)tmo; } #ifdef SANSA_CONNECT void GIO14(void) __attribute__ ((section(".icode"))); void GIO14(void) { static struct timeout sd1_oneshot; /* clear interrupt */ IO_INTC_IRQ2 = (1<<3); timeout_register(&sd1_oneshot, sd1_oneshot_callback, (3*HZ/10), 0); } #endif bool sd_removable(IF_MD_NONVOID(int card_no)) { #ifndef HAVE_MULTIDRIVE const int card_no = 0; #endif return (card_no == CARD_NUM_SLOT); } bool sd_present(IF_MD_NONVOID(int card_no)) { #ifndef HAVE_MULTIDRIVE const int card_no = 0; #endif return (card_no == CARD_NUM_SLOT) ? card_detect_target() : #ifdef SANSA_CONNECT true; /* iNAND is always present */ #else false; #endif } #else /* no hotswap */ bool sd_removable(IF_MD_NONVOID(int card_no)) { #ifdef HAVE_MULTIDRIVE (void)card_no; #endif /* not applicable */ return false; } #endif /* HAVE_HOTSWAP */ static int sd_wait_for_state(unsigned int state) { unsigned long response = 0; unsigned int timeout = HZ; /* ticks */ long t = current_tick; while (1) { long tick; int ret = sd_command(SD_SEND_STATUS, currcard->rca, SDHC_RESP_FMT_1, &response); if (ret < 0) return ret; if ((SD_R1_CURRENT_STATE(response) == state)) { return EC_OK; } if(TIME_AFTER(current_tick, t + timeout)) return -2; if (TIME_AFTER((tick = current_tick), next_yield)) { yield(); timeout += current_tick - tick; next_yield = tick + MIN_YIELD_PERIOD; } } } static int sd_transfer_sectors(int card_no, unsigned long start, int count, void *buffer, bool write) { int ret; unsigned long start_addr; int dma_channel = -1; bool use_direct_dma; int count_per_dma; unsigned long rel_addr; dbgprintf("transfer %d %d %d", card_no, start, count); mutex_lock(&sd_mtx); enable_controller(true); sd_transfer_retry: if (card_no == CARD_NUM_SLOT && !card_detect_target()) { /* no external sd-card inserted */ ret = -EC_NOCARD; goto sd_transfer_error; } sd_select_device(card_no); if (currcard->initialized < 0) { ret = currcard->initialized; goto sd_transfer_error; } last_disk_activity = current_tick; ret = sd_wait_for_state(SD_TRAN); if (ret < EC_OK) { goto sd_transfer_error; } IO_MMC_BLOCK_LENGTH = currcard->blocksize; start_addr = start; do { count_per_dma = count; if (((unsigned long)buffer) & 0x1F) { /* MMC/SD interface requires 32-byte alignment of buffer */ use_direct_dma = false; if (count > UNALIGNED_NUM_SECTORS) { count_per_dma = UNALIGNED_NUM_SECTORS; } } else { use_direct_dma = true; } if (write == true) { if (use_direct_dma == false) { memcpy(aligned_buffer, buffer, count_per_dma*SD_BLOCK_SIZE); } commit_dcache_range(use_direct_dma ? buffer : aligned_buffer, count_per_dma*SD_BLOCK_SIZE); } IO_MMC_NR_BLOCKS = count_per_dma; /* Set start_addr to the correct unit (blocks or bytes) */ if (!(card_info[card_no].ocr & SD_OCR_CARD_CAPACITY_STATUS)) start_addr *= SD_BLOCK_SIZE; /* not SDHC */ ret = sd_command(write ? SD_WRITE_MULTIPLE_BLOCK : SD_READ_MULTIPLE_BLOCK, start_addr, MMC_CMD_DCLR | MMC_CMD_DATA | SDHC_RESP_FMT_1 | (write ? MMC_CMD_WRITE : 0), NULL); if (ret < 0) goto sd_transfer_error; /* other burst modes are not supported for this peripheral */ dma_channel = dma_request_channel(DMA_PERIPHERAL_MMCSD, DMA_MODE_8_BURST); if (use_direct_dma == true) { rel_addr = ((unsigned long)buffer)-CONFIG_SDRAM_START; } else { rel_addr = ((unsigned long)aligned_buffer)-CONFIG_SDRAM_START; } IO_MMC_SD_DMA_ADDR_LOW = rel_addr & 0xFFFF; IO_MMC_SD_DMA_ADDR_HI = (rel_addr & 0xFFFF0000) >> 16; IO_MMC_SD_DMA_MODE |= MMC_DMAMODE_ENABLE; if (write == true) { IO_MMC_SD_DMA_MODE |= MMC_DMAMODE_WRITE; } IO_MMC_SD_DMA_TRIGGER = 1; dbgprintf("SD DMA transfer in progress"); ret = dma_wait_for_completion(); dma_release_channel(dma_channel); dbgprintf("SD DMA transfer complete"); if (ret != EC_OK) { goto sd_transfer_error; } if (write == false) { discard_dcache_range(use_direct_dma ? buffer : aligned_buffer, count_per_dma*SD_BLOCK_SIZE); if (use_direct_dma == false) { memcpy(buffer, aligned_buffer, count_per_dma*SD_BLOCK_SIZE); } } last_disk_activity = current_tick; ret = sd_command(SD_STOP_TRANSMISSION, 0, SDHC_RESP_FMT_1, NULL); if (ret < 0) { goto sd_transfer_error; } ret = sd_wait_for_state(SD_TRAN); if (ret < 0) { goto sd_transfer_error; } count -= count_per_dma; buffer += count_per_dma*SD_BLOCK_SIZE; start_addr += count_per_dma; } while (count > 0); while (1) { enable_controller(false); mutex_unlock(&sd_mtx); return ret; sd_transfer_error: if (sd_status[card_no].retry < sd_status[card_no].retry_max && ret != -EC_NOCARD) { sd_status[card_no].retry++; currcard->initialized = 0; goto sd_transfer_retry; } } } int sd_read_sectors(IF_MD(int card_no,) unsigned long start, int incount, void* inbuf) { #ifndef HAVE_MULTIDRIVE const int card_no = 0; #endif return sd_transfer_sectors(card_no, start, incount, inbuf, false); } int sd_write_sectors(IF_MD(int card_no,) unsigned long start, int count, const void* outbuf) { #ifndef BOOTLOADER #ifndef HAVE_MULTIDRIVE const int card_no = 0; #endif return sd_transfer_sectors(card_no, start, count, (void*)outbuf, true); #else /* we don't need write support in bootloader */ #ifdef HAVE_MULTIDRIVE (void)card_no; #endif (void)start; (void)count; (void)outbuf; return 0; #endif } int sd_init(void) { int ret = EC_OK; if (!initialized) { mutex_init(&sd_mtx); initialized = true; } mutex_lock(&sd_mtx); #ifndef BOOTLOADER enable_controller(false); #endif /* based on linux/drivers/mmc/dm320mmc.c Copyright (C) 2006 ZSI, All Rights Reserved. Written by: Ben Bostwick */ bitclr16(&IO_CLK_MOD2, CLK_MOD2_MMC); bitset16(&IO_CLK_INV, CLK_INV_MMC); /* mmc module clock: 75 Mhz (AHB) / 2 = ~37.5 Mhz * (Frequencies above are taken from Sansa Connect's OF source code) */ IO_CLK_DIV3 = (IO_CLK_DIV3 & 0xFF00) | 0x02; /* OF uses 1 */ bitset16(&IO_CLK_MOD2, CLK_MOD2_MMC); /* set mmc module into reset */ bitset16(&IO_MMC_CONTROL, (MMC_CTRL_DATRST | MMC_CTRL_CMDRST)); /* set resp timeout to max */ IO_MMC_RESPONSE_TIMEOUT |= 0x1FFF; IO_MMC_READ_TIMEOUT = 0xFFFF; /* all done, take mmc module out of reset */ bitclr16(&IO_MMC_CONTROL, (MMC_CTRL_DATRST | MMC_CTRL_CMDRST)); #ifdef SANSA_CONNECT /* GIO37 - Power Card; GIO38 - Power iNAND (both active low) */ IO_GIO_DIR2 &= ~((1 << 5) /* GIO37 */ | (1 << 6) /* GIO38 */); IO_GIO_INV2 &= ~((1 << 5) /* GIO37 */ | (1 << 6) /* GIO38 */); IO_GIO_BITCLR2 = (1 << 5) | (1 << 6); /* GIO6 - select Card; GIO5 - select iNAND (both active low) */ IO_GIO_DIR0 &= ~((1 << 6) /* GIO6 */ | (1 << 5) /* GIO5 */); IO_GIO_INV0 &= ~((1 << 6) /* GIO6 */ | (1 << 5) /* GIO5 */); IO_GIO_BITSET0 = (1 << 6) | (1 << 5); #ifdef HAVE_HOTSWAP /* GIO14 is card detect */ IO_GIO_DIR0 |= (1 << 14); /* Set GIO14 as input */ IO_GIO_INV0 &= ~(1 << 14); /* GIO14 not inverted */ IO_GIO_IRQPORT |= (1 << 14); /* Enable GIO14 external interrupt */ IO_GIO_IRQEDGE |= (1 << 14); /* Any edge detection */ /* Enable GIO14 interrupt */ IO_INTC_EINT2 |= INTR_EINT2_EXT14; #endif #endif sd_select_device(1); /* Disable Memory Card CLK - it is enabled on demand by TMS320DM320 */ bitclr16(&IO_MMC_MEM_CLK_CONTROL, (1 << 8)); mutex_unlock(&sd_mtx); return ret; } long sd_last_disk_activity(void) { return last_disk_activity; } tCardInfo *card_get_info_target(int card_no) { return &card_info[card_no]; } int sd_event(long id, intptr_t data) { int rc = 0; switch (id) { #ifdef HAVE_HOTSWAP case SYS_HOTSWAP_INSERTED: case SYS_HOTSWAP_EXTRACTED: mutex_lock(&sd_mtx); /* lock-out card activity */ /* Force card init for new card, re-init for re-inserted one or * clear if the last attempt to init failed with an error. */ card_info[data].initialized = 0; mutex_unlock(&sd_mtx); break; #endif /* HAVE_HOTSWAP */ default: rc = storage_event_default_handler(id, data, last_disk_activity, STORAGE_SD); break; } return rc; }