/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2009 Jeffrey Goode * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include #include #include "fixedpoint.h" #include "fracmul.h" #include /* Define LOGF_ENABLE to enable logf output in this file */ /*#define LOGF_ENABLE*/ #include "logf.h" #include "dsp_proc_entry.h" #include "compressor.h" static struct compressor_settings curr_set; /* Cached settings */ static int32_t comp_rel_slope IBSS_ATTR; /* S7.24 format */ static int32_t comp_makeup_gain IBSS_ATTR; /* S7.24 format */ static int32_t comp_curve[66] IBSS_ATTR; /* S7.24 format */ static int32_t release_gain IBSS_ATTR; /* S7.24 format */ #define UNITY (1L << 24) /* unity gain in S7.24 format */ /** COMPRESSOR UPDATE * Called via the menu system to configure the compressor process */ static bool compressor_update(const struct compressor_settings *settings) { /* make settings values useful */ int threshold = settings->threshold; bool auto_gain = settings->makeup_gain == 1; static const int comp_ratios[] = { 2, 4, 6, 10, 0 }; int ratio = comp_ratios[settings->ratio]; bool soft_knee = settings->knee == 1; int release = settings->release_time * NATIVE_FREQUENCY / 1000; bool changed = false; bool active = threshold < 0; if (memcmp(settings, &curr_set, sizeof (curr_set))) { /* Compressor settings have changed since last call */ changed = true; #if defined(ROCKBOX_HAS_LOGF) && defined(LOGF_ENABLE) if (settings->threshold != curr_set.threshold) { logf(" Compressor Threshold: %d dB\tEnabled: %s", threshold, active ? "Yes" : "No"); } if (settings->makeup_gain != curr_set.makeup_gain) { logf(" Compressor Makeup Gain: %s", auto_gain ? "Auto" : "Off"); } if (settings->ratio != cur_set.ratio) { if (ratio) { logf(" Compressor Ratio: %d:1", ratio); } else { logf(" Compressor Ratio: Limit"); } } if (settings->knee != cur_set.knee) { logf(" Compressor Knee: %s", soft_knee?"Soft":"Hard"); } if (settings->release_time != cur_set.release_time) { logf(" Compressor Release: %d", release); } #endif curr_set = *settings; } if (!changed || !active) return active; /* configure variables for compressor operation */ static const int32_t db[] = { /* positive db equivalents in S15.16 format */ 0x000000, 0x241FA4, 0x1E1A5E, 0x1A94C8, 0x181518, 0x1624EA, 0x148F82, 0x1338BD, 0x120FD2, 0x1109EB, 0x101FA4, 0x0F4BB6, 0x0E8A3C, 0x0DD840, 0x0D3377, 0x0C9A0E, 0x0C0A8C, 0x0B83BE, 0x0B04A5, 0x0A8C6C, 0x0A1A5E, 0x09ADE1, 0x094670, 0x08E398, 0x0884F6, 0x082A30, 0x07D2FA, 0x077F0F, 0x072E31, 0x06E02A, 0x0694C8, 0x064BDF, 0x060546, 0x05C0DA, 0x057E78, 0x053E03, 0x04FF5F, 0x04C273, 0x048726, 0x044D64, 0x041518, 0x03DE30, 0x03A89B, 0x037448, 0x03412A, 0x030F32, 0x02DE52, 0x02AE80, 0x027FB0, 0x0251D6, 0x0224EA, 0x01F8E2, 0x01CDB4, 0x01A359, 0x0179C9, 0x0150FC, 0x0128EB, 0x010190, 0x00DAE4, 0x00B4E1, 0x008F82, 0x006AC1, 0x004699, 0x002305}; struct curve_point { int32_t db; /* S15.16 format */ int32_t offset; /* S15.16 format */ } db_curve[5]; /** Set up the shape of the compression curve first as decibel values */ /* db_curve[0] = bottom of knee [1] = threshold [2] = top of knee [3] = 0 db input [4] = ~+12db input (2 bits clipping overhead) */ db_curve[1].db = threshold << 16; if (soft_knee) { /* bottom of knee is 3dB below the threshold for soft knee*/ db_curve[0].db = db_curve[1].db - (3 << 16); /* top of knee is 3dB above the threshold for soft knee */ db_curve[2].db = db_curve[1].db + (3 << 16); if (ratio) /* offset = -3db * (ratio - 1) / ratio */ db_curve[2].offset = (int32_t)((long long)(-3 << 16) * (ratio - 1) / ratio); else /* offset = -3db for hard limit */ db_curve[2].offset = (-3 << 16); } else { /* bottom of knee is at the threshold for hard knee */ db_curve[0].db = threshold << 16; /* top of knee is at the threshold for hard knee */ db_curve[2].db = threshold << 16; db_curve[2].offset = 0; } /* Calculate 0db and ~+12db offsets */ db_curve[4].db = 0xC0A8C; /* db of 2 bits clipping */ if (ratio) { /* offset = threshold * (ratio - 1) / ratio */ db_curve[3].offset = (int32_t)((long long)(threshold << 16) * (ratio - 1) / ratio); db_curve[4].offset = (int32_t)((long long)-db_curve[4].db * (ratio - 1) / ratio) + db_curve[3].offset; } else { /* offset = threshold for hard limit */ db_curve[3].offset = (threshold << 16); db_curve[4].offset = -db_curve[4].db + db_curve[3].offset; } /** Now set up the comp_curve table with compression offsets in the form of gain factors in S7.24 format */ /* comp_curve[0] is 0 (-infinity db) input */ comp_curve[0] = UNITY; /* comp_curve[1 to 63] are intermediate compression values corresponding to the 6 MSB of the input values of a non-clipped signal */ for (int i = 1; i < 64; i++) { /* db constants are stored as positive numbers; make them negative here */ int32_t this_db = -db[i]; /* no compression below the knee */ if (this_db <= db_curve[0].db) comp_curve[i] = UNITY; /* if soft knee and below top of knee, interpolate along soft knee slope */ else if (soft_knee && (this_db <= db_curve[2].db)) comp_curve[i] = fp_factor(fp_mul( ((this_db - db_curve[0].db) / 6), db_curve[2].offset, 16), 16) << 8; /* interpolate along ratio slope above the knee */ else comp_curve[i] = fp_factor(fp_mul( fp_div((db_curve[1].db - this_db), db_curve[1].db, 16), db_curve[3].offset, 16), 16) << 8; } /* comp_curve[64] is the compression level of a maximum level, non-clipped signal */ comp_curve[64] = fp_factor(db_curve[3].offset, 16) << 8; /* comp_curve[65] is the compression level of a maximum level, clipped signal */ comp_curve[65] = fp_factor(db_curve[4].offset, 16) << 8; #if defined(ROCKBOX_HAS_LOGF) && defined(LOGF_ENABLE) logf("\n *** Compression Offsets ***"); /* some settings for display only, not used in calculations */ db_curve[0].offset = 0; db_curve[1].offset = 0; db_curve[3].db = 0; for (int i = 0; i <= 4; i++) { logf("Curve[%d]: db: % 6.2f\toffset: % 6.2f", i, (float)db_curve[i].db / (1 << 16), (float)db_curve[i].offset / (1 << 16)); } logf("\nGain factors:"); for (int i = 1; i <= 65; i++) { DEBUGF("%02d: %.6f ", i, (float)comp_curve[i] / UNITY); if (i % 4 == 0) DEBUGF("\n"); } DEBUGF("\n"); #endif /* if using auto peak, then makeup gain is max offset - .1dB headroom */ comp_makeup_gain = auto_gain ? fp_factor(-(db_curve[3].offset) - 0x199A, 16) << 8 : UNITY; logf("Makeup gain:\t%.6f", (float)comp_makeup_gain / UNITY); /* calculate per-sample gain change a rate of 10db over release time */ comp_rel_slope = 0xAF0BB2 / release; logf("Release slope:\t%.6f", (float)comp_rel_slope / UNITY); release_gain = UNITY; return active; } /** GET COMPRESSION GAIN * Returns the required gain factor in S7.24 format in order to compress the * sample in accordance with the compression curve. Always 1 or less. */ static inline int32_t get_compression_gain(struct sample_format *format, int32_t sample) { const int frac_bits_offset = format->frac_bits - 15; /* sample must be positive */ if (sample < 0) sample = -(sample + 1); /* shift sample into 15 frac bit range */ if (frac_bits_offset > 0) sample >>= frac_bits_offset; if (frac_bits_offset < 0) sample <<= -frac_bits_offset; /* normal case: sample isn't clipped */ if (sample < (1 << 15)) { /* index is 6 MSB, rem is 9 LSB */ int index = sample >> 9; int32_t rem = (sample & 0x1FF) << 22; /* interpolate from the compression curve: higher gain - ((rem / (1 << 31)) * (higher gain - lower gain)) */ return comp_curve[index] - (FRACMUL(rem, (comp_curve[index] - comp_curve[index + 1]))); } /* sample is somewhat clipped, up to 2 bits of overhead */ if (sample < (1 << 17)) { /* straight interpolation: higher gain - ((clipped portion of sample * 4/3 / (1 << 31)) * (higher gain - lower gain)) */ return comp_curve[64] - (FRACMUL(((sample - (1 << 15)) / 3) << 16, (comp_curve[64] - comp_curve[65]))); } /* sample is too clipped, return invalid value */ return -1; } /** DSP interface **/ /** SET COMPRESSOR * Enable or disable the compressor based upon the settings */ void dsp_set_compressor(const struct compressor_settings *settings) { /* enable/disable the compressor depending upon settings */ bool enable = compressor_update(settings); struct dsp_config *dsp = dsp_get_config(CODEC_IDX_AUDIO); dsp_proc_enable(dsp, DSP_PROC_COMPRESSOR, enable); dsp_proc_activate(dsp, DSP_PROC_COMPRESSOR, true); } /** COMPRESSOR PROCESS * Changes the gain of the samples according to the compressor curve */ static void compressor_process(struct dsp_proc_entry *this, struct dsp_buffer **buf_p) { struct dsp_buffer *buf = *buf_p; int count = buf->remcount; int32_t *in_buf[2] = { buf->p32[0], buf->p32[1] }; const int num_chan = buf->format.num_channels; while (count-- > 0) { /* use lowest (most compressed) gain factor of the output buffer sample pair for both samples (mono is also handled correctly here) */ int32_t sample_gain = UNITY; for (int ch = 0; ch < num_chan; ch++) { int32_t this_gain = get_compression_gain(&buf->format, *in_buf[ch]); if (this_gain < sample_gain) sample_gain = this_gain; } /* perform release slope; skip if no compression and no release slope */ if ((sample_gain != UNITY) || (release_gain != UNITY)) { /* if larger offset than previous slope, start new release slope */ if ((sample_gain <= release_gain) && (sample_gain > 0)) { release_gain = sample_gain; } else /* keep sloping towards unity gain (and ignore invalid value) */ { release_gain += comp_rel_slope; if (release_gain > UNITY) { release_gain = UNITY; } } } /* total gain factor is the product of release gain and makeup gain, but avoid computation if possible */ int32_t total_gain = ((release_gain == UNITY) ? comp_makeup_gain : (comp_makeup_gain == UNITY) ? release_gain : FRACMUL_SHL(release_gain, comp_makeup_gain, 7)); /* Implement the compressor: apply total gain factor (if any) to the output buffer sample pair/mono sample */ if (total_gain != UNITY) { for (int ch = 0; ch < num_chan; ch++) { *in_buf[ch] = FRACMUL_SHL(total_gain, *in_buf[ch], 7); } } in_buf[0]++; in_buf[1]++; } (void)this; } /* DSP message hook */ static intptr_t compressor_configure(struct dsp_proc_entry *this, struct dsp_config *dsp, unsigned int setting, intptr_t value) { switch (setting) { case DSP_PROC_INIT: if (value != 0) break; /* Already enabled */ this->process = compressor_process; /* Fall-through */ case DSP_RESET: case DSP_FLUSH: release_gain = UNITY; break; } return 0; (void)dsp; } /* Database entry */ DSP_PROC_DB_ENTRY( COMPRESSOR, compressor_configure);