/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2005 by Christian Gmeiner * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef _TLV320_H_ #define _TLV320_H_ /*** definitions ***/ extern void tlv320_reset(void); extern int tlv320_init(void); extern int tlv320_set_headphone_vol(int vol_l, int vol_r); extern int tlv320_mute(bool mute); #define HEADPHONE_MUTE 0x30 /* 0110000 = -73db */ /* ToDo: samplerates */ /* registers */ /* REG_LLIV: Left line input channel volume control */ #define REG_LLIV 0x0 #define LLIV_LRS (0 << 8) /* simultaneous volume/mute update */ #define LIM (1 << 7) /* Left line input mute */ #define LIV ((x) & 0x1f)/* Left line input volume control */ /* REG_RLIV: Right line input channel volume control */ #define REG_RLIV 0x1 #define RLIV_RLS (0 << 8) /* simultaneous volume/mute update */ #define RLIV_RIM (0 << 7) /* Right line input mute */ #define RLIV_LIV ((x) & 0x1f)/* Right line input volume control */ /* REG_LHV: Left Channel Headphone Volume Control */ #define REG_LHV 0x2 #define LHV_LRS (0 << 8) /* simultaneous volume/mute update */ #define LHV_LZC (0 << 7) /* Left-channel zero-cross detect */ #define LHV_LHV ((x) & 0x1f)/* Left headphone volume control */ /* REG_RHV: Right Channel Headphone Volume Control */ #define REG_RHV 0x3 #define RHV_LRS (0 << 8) /* simultaneous volume/mute update */ #define RHV_RZC (0 << 7) /* Right-channel zero-cross detect */ #define RHV_LHV ((x) & 0x1f)/* Right headphone volume control */ /* REG_AAP: Analog Audio Path Control */ #define REG_AAP 0x4 #define AAP_DAC (1 << 4) /* DAC select */ #define AAP_BYPASS (1 << 3) /* bypass */ #define AAP_INSEL (0 << 2) /* Input select for ADC */ #define AAP_MICM (1 << 1) /* Microphone mute */ #define AAP_MICB (1 << 0) /* Microphone boost */ /* REG_DAP: Digital Audio Path Control */ #define REG_DAP 0x5 #define DAP_DACM (1 << 3) /* DAC soft mute */ #define DAP_DEEMP_DIS (0 << 1) /* De-emphasis control: disabled */ #define DAP_DEEMP_32 (1 << 1) /* De-emphasis control: 32 kHz */ #define DAP_DEEMP_44 (2 << 1) /* De-emphasis control: 44.1 kHz */ #define DAP_DEEMP_48 (3 << 1) /* De-emphasis control: 48 kHz */ #define DAP_ADCHP (0 << 0) /* ADC high-pass filter */ /* REG_PC: Power Down Control */ #define REG_PC 0x6 #define PC_OFF (0 << 7) /* Device power */ #define PC_CLK (0 << 6) /* Clock */ #define PC_OSC (0 << 5) /* Oscillator */ #define PC_OUT (0 << 4) /* Outputs */ #define PC_DAC (0 << 3) /* DAC */ #define PC_ADC (0 << 2) /* ADC */ #define PC_MIC (0 << 1) /* Microphone input */ #define PC_LINE (0 << 0) /* Line input */ /* REG_DAIF: Digital Audio Interface Format */ #define REG_DAIF 0x7 #define DAIF_MS (1 << 6) /* Master/slave mode */ #define DAIF_LRSWAP (1 << 5) /* DAC left/right swap */ #define DAIF_LRP (0 << 4) /* DAC left/right phase */ #define DAIF_IWL_16 (0 << 2) /* Input bit length: 16 bit */ #define DAIF_IWL_20 (1 << 2) /* Input bit length: 20 bit */ #define DAIF_IWL_24 (2 << 2) /* Input bit length: 24 bit */ #define DAIF_IWL_32 (3 << 2) /* Input bit length: 32 bit */ #define DAIF_FOR_DSP (3 << 0) /* Data format: DSP */ #define DAIF_FOR_I2S (2 << 0) /* Data format: I2S */ #define DAIF_FOR_MSBL (1 << 0) /* Data format: MSB first, left aligned */ #define DAIF_FOR_MSBR (0 << 0) /* Data format: MSB first, right aligned */ /* REG_SRC: Sample Rate Control */ #define REG_SRC 0x8 #define SRC_CLKIN (0 << 6) /* Clock input divider */ #define SRC_CLKOUT (0 << 7) /* Clock output divider */ /*#define SRC_SR ()*/ #define SRC_BOSR (1 << 1) /* Base oversampling rate, depends on SRC_USB */ #define SRC_USB (1 << 0) /* Clock mode select */ /* REG_DIA: Digital Interface Activation */ #define REG_DIA 0x9 #define DIA_ACT (1 << 6) /* Activate interface */ /* REG_RR: Reset Register */ #define REG_RR 0xf #define RR_RESET 0 /* Reset */ #endif /*_TLV320_H_*/