/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 Daniel Ankers * Copyright © 2008-2009 Rafaël Carré * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* Driver for the ARM PL180 SD/MMC controller inside AS3525 SoC */ /* TODO: Find the real capacity of >2GB models (will be useful for USB) */ #include "config.h" /* for HAVE_MULTIDRIVE & AMS_OF_SIZE */ #include "fat.h" #include "thread.h" #include "led.h" #include "hotswap.h" #include "system.h" #include "cpu.h" #include #include #include #include "as3525.h" #include "pl180.h" /* SD controller */ #include "pl081.h" /* DMA controller */ #include "dma-target.h" /* DMA request lines */ #include "clock-target.h" #include "panic.h" #ifdef HAVE_BUTTON_LIGHT #include "backlight-target.h" #endif #include "stdbool.h" #include "ata_idle_notify.h" #include "sd.h" #include "usb.h" #ifdef HAVE_HOTSWAP #include "disk.h" #endif /* command flags */ #define MCI_NO_FLAGS (0<<0) #define MCI_RESP (1<<0) #define MCI_LONG_RESP (1<<1) #define MCI_ARG (1<<2) /* ARM PL180 registers */ #define MCI_POWER(i) (*(volatile unsigned char *) (pl180_base[i]+0x00)) #define MCI_CLOCK(i) (*(volatile unsigned long *) (pl180_base[i]+0x04)) #define MCI_ARGUMENT(i) (*(volatile unsigned long *) (pl180_base[i]+0x08)) #define MCI_COMMAND(i) (*(volatile unsigned long *) (pl180_base[i]+0x0C)) #define MCI_RESPCMD(i) (*(volatile unsigned long *) (pl180_base[i]+0x10)) #define MCI_RESP0(i) (*(volatile unsigned long *) (pl180_base[i]+0x14)) #define MCI_RESP1(i) (*(volatile unsigned long *) (pl180_base[i]+0x18)) #define MCI_RESP2(i) (*(volatile unsigned long *) (pl180_base[i]+0x1C)) #define MCI_RESP3(i) (*(volatile unsigned long *) (pl180_base[i]+0x20)) #define MCI_DATA_TIMER(i) (*(volatile unsigned long *) (pl180_base[i]+0x24)) #define MCI_DATA_LENGTH(i) (*(volatile unsigned short*) (pl180_base[i]+0x28)) #define MCI_DATA_CTRL(i) (*(volatile unsigned char *) (pl180_base[i]+0x2C)) #define MCI_DATA_CNT(i) (*(volatile unsigned short*) (pl180_base[i]+0x30)) #define MCI_STATUS(i) (*(volatile unsigned long *) (pl180_base[i]+0x34)) #define MCI_CLEAR(i) (*(volatile unsigned long *) (pl180_base[i]+0x38)) #define MCI_MASK0(i) (*(volatile unsigned long *) (pl180_base[i]+0x3C)) #define MCI_MASK1(i) (*(volatile unsigned long *) (pl180_base[i]+0x40)) #define MCI_SELECT(i) (*(volatile unsigned long *) (pl180_base[i]+0x44)) #define MCI_FIFO_CNT(i) (*(volatile unsigned long *) (pl180_base[i]+0x48)) #define MCI_DATA_ERROR \ ( MCI_DATA_CRC_FAIL \ | MCI_DATA_TIMEOUT \ | MCI_TX_UNDERRUN \ | MCI_RX_OVERRUN \ | MCI_START_BIT_ERR) #define MCI_RESPONSE_ERROR \ ( MCI_CMD_TIMEOUT \ | MCI_CMD_CRC_FAIL) #define MCI_FIFO(i) ((unsigned long *) (pl180_base[i]+0x80)) /* volumes */ #define INTERNAL_AS3525 0 /* embedded SD card */ #define SD_SLOT_AS3525 1 /* SD slot if present */ static const int pl180_base[NUM_DRIVES] = { NAND_FLASH_BASE #ifdef HAVE_MULTIDRIVE , SD_MCI_BASE #endif }; static int sd_wait_for_state(const int drive, unsigned int state); static int sd_select_bank(signed char bank); static int sd_init_card(const int drive); static void init_pl180_controller(const int drive); #define BLOCKS_PER_BANK 0x7a7800 static tCardInfo card_info[NUM_DRIVES]; /* maximum timeouts recommanded in the SD Specification v2.00 */ #define SD_MAX_READ_TIMEOUT ((AS3525_PCLK_FREQ) / 1000 * 100) /* 100 ms */ #define SD_MAX_WRITE_TIMEOUT ((AS3525_PCLK_FREQ) / 1000 * 250) /* 250 ms */ /* for compatibility */ static long last_disk_activity = -1; #define MIN_YIELD_PERIOD 5 /* ticks */ static long next_yield = 0; static long sd_stack [(DEFAULT_STACK_SIZE*2 + 0x200)/sizeof(long)]; static const char sd_thread_name[] = "ata/sd"; static struct mutex sd_mtx; static struct event_queue sd_queue; #ifndef BOOTLOADER bool sd_enabled = false; #endif #if defined(HAVE_MULTIDRIVE) static bool hs_card = false; #endif static struct wakeup transfer_completion_signal; static volatile unsigned int transfer_error[NUM_VOLUMES]; #define PL180_MAX_TRANSFER_ERRORS 10 #define UNALIGNED_NUM_SECTORS 10 static unsigned char aligned_buffer[UNALIGNED_NUM_SECTORS* SD_BLOCK_SIZE] __attribute__((aligned(32))); /* align on cache line size */ static unsigned char *uncached_buffer = UNCACHED_ADDR(&aligned_buffer[0]); static inline void mci_delay(void) { int i = 0xffff; do { asm volatile("nop\n"); } while (--i); } static inline bool card_detect_target(void) { #if defined(HAVE_MULTIDRIVE) return !(GPIOA_PIN(2)); #else return false; #endif } #ifdef HAVE_HOTSWAP static int sd1_oneshot_callback(struct timeout *tmo) { (void)tmo; /* This is called only if the state was stable for 300ms - check state * and post appropriate event. */ if (card_detect_target()) { queue_broadcast(SYS_HOTSWAP_INSERTED, 0); } else queue_broadcast(SYS_HOTSWAP_EXTRACTED, 0); return 0; } void INT_GPIOA(void) { static struct timeout sd1_oneshot; /* acknowledge interrupt */ GPIOA_IC = (1<<2); timeout_register(&sd1_oneshot, sd1_oneshot_callback, (3*HZ/10), 0); } #endif /* HAVE_HOTSWAP */ void INT_NAND(void) { const int status = MCI_STATUS(INTERNAL_AS3525); transfer_error[INTERNAL_AS3525] = status & MCI_DATA_ERROR; wakeup_signal(&transfer_completion_signal); MCI_CLEAR(INTERNAL_AS3525) = status; } #ifdef HAVE_MULTIDRIVE void INT_MCI0(void) { const int status = MCI_STATUS(SD_SLOT_AS3525); transfer_error[SD_SLOT_AS3525] = status & MCI_DATA_ERROR; wakeup_signal(&transfer_completion_signal); MCI_CLEAR(SD_SLOT_AS3525) = status; } #endif static bool send_cmd(const int drive, const int cmd, const int arg, const int flags, long *response) { int status; /* Clear old status flags */ MCI_CLEAR(drive) = 0x7ff; /* Load command argument or clear if none */ MCI_ARGUMENT(drive) = (flags & MCI_ARG) ? arg : 0; /* Construct MCI_COMMAND & enable CPSM */ MCI_COMMAND(drive) = /*b0:5*/ cmd /* b6 */| ((flags & (MCI_RESP|MCI_LONG_RESP)) ? MCI_COMMAND_RESPONSE : 0) /* b7 */| ((flags & MCI_LONG_RESP) ? MCI_COMMAND_LONG_RESPONSE : 0) /* b8 | MCI_COMMAND_INTERRUPT */ /* b9 | MCI_COMMAND_PENDING */ /*Only used with stream data transfer*/ /* b10*/| MCI_COMMAND_ENABLE; /* Enables CPSM */ /* Wait while cmd completes then disable CPSM */ while(MCI_STATUS(drive) & MCI_CMD_ACTIVE); MCI_COMMAND(drive) = 0; status = MCI_STATUS(drive); /* Handle command responses */ if(flags & MCI_RESP) /* CMD expects response */ { response[0] = MCI_RESP0(drive); /* Always prepare short response */ if(status & MCI_RESPONSE_ERROR) /* timeout or crc failure */ return false; if(status & MCI_CMD_RESP_END) /*Response passed CRC check */ { if(flags & MCI_LONG_RESP) { /* replace short response with long response */ /* store the response in reverse words order */ response[0] = MCI_RESP3(drive); response[1] = MCI_RESP2(drive); response[2] = MCI_RESP1(drive); response[3] = MCI_RESP0(drive); } return true; } } else if(status & MCI_CMD_SENT) /* CMD sent, no response required */ return true; return false; } #define MCI_FULLSPEED (MCI_CLOCK_ENABLE | MCI_CLOCK_BYPASS) /* MCLK */ #define MCI_HALFSPEED (MCI_CLOCK_ENABLE) /* MCLK/2 */ #define MCI_QUARTERSPEED (MCI_CLOCK_ENABLE | 1) /* MCLK/4 */ #define MCI_IDENTSPEED (MCI_CLOCK_ENABLE | AS3525_SD_IDENT_DIV) /* IDENT */ static int sd_init_card(const int drive) { unsigned long response; long init_timeout; bool sd_v2 = false; unsigned long temp_reg[4]; int i; /* MCLCK on and set to 400kHz ident frequency */ MCI_CLOCK(drive) = MCI_IDENTSPEED; /* 100 - 400kHz clock required for Identification Mode */ /* Start of Card Identification Mode ************************************/ /* CMD0 Go Idle */ if(!send_cmd(drive, SD_GO_IDLE_STATE, 0, MCI_NO_FLAGS, NULL)) return -1; mci_delay(); /* CMD8 Check for v2 sd card. Must be sent before using ACMD41 Non v2 cards will not respond to this command*/ if(send_cmd(drive, SD_SEND_IF_COND, 0x1AA, MCI_RESP|MCI_ARG, &response)) if((response & 0xFFF) == 0x1AA) sd_v2 = true; /* timeout for initialization is 1sec, from SD Specification 2.00 */ init_timeout = current_tick + HZ; do { /* this timeout is the only valid error for this loop*/ if(TIME_AFTER(current_tick, init_timeout)) return -2; /* app_cmd */ send_cmd(drive, SD_APP_CMD, 0, MCI_RESP|MCI_ARG, &response); /* ACMD41 For v2 cards set HCS bit[30] & send host voltage range to all */ send_cmd(drive, SD_APP_OP_COND, (0x00FF8000 | (sd_v2 ? 1<<30 : 0)), MCI_RESP|MCI_ARG, &card_info[drive].ocr); } while(!(card_info[drive].ocr & (1<<31))); /* CMD2 send CID */ if(!send_cmd(drive, SD_ALL_SEND_CID, 0, MCI_RESP|MCI_LONG_RESP|MCI_ARG, temp_reg)) return -3; for(i=0; i<4; i++) card_info[drive].cid[3-i] = temp_reg[i]; /* CMD3 send RCA */ if(!send_cmd(drive, SD_SEND_RELATIVE_ADDR, 0, MCI_RESP|MCI_ARG, &card_info[drive].rca)) return -4; /* End of Card Identification Mode ************************************/ #ifdef HAVE_MULTIDRIVE /* The internal SDs are v1 */ /* Try to switch V2 cards to HS timings, non HS seem to ignore this */ if(sd_v2) { /* CMD7 w/rca: Select card to put it in TRAN state */ if(!send_cmd(drive, SD_SELECT_CARD, card_info[drive].rca, MCI_ARG, NULL)) return -5; mci_delay(); if(sd_wait_for_state(drive, SD_TRAN)) return -6; /* CMD6 */ if(!send_cmd(drive, SD_SWITCH_FUNC, 0x80fffff1, MCI_ARG, NULL)) return -7; mci_delay(); /* go back to STBY state so we can read csd */ /* CMD7 w/rca=0: Deselect card to put it in STBY state */ if(!send_cmd(drive, SD_DESELECT_CARD, 0, MCI_ARG, NULL)) return -8; mci_delay(); } #endif /* HAVE_MULTIDRIVE */ /* CMD9 send CSD */ if(!send_cmd(drive, SD_SEND_CSD, card_info[drive].rca, MCI_RESP|MCI_LONG_RESP|MCI_ARG, temp_reg)) return -9; for(i=0; i<4; i++) card_info[drive].csd[3-i] = temp_reg[i]; sd_parse_csd(&card_info[drive]); #if defined(HAVE_MULTIDRIVE) hs_card = (card_info[drive].speed == 50000000); #endif /* Boost MCICLK to operating speed */ if(drive == INTERNAL_AS3525) MCI_CLOCK(drive) = MCI_HALFSPEED; /* MCICLK = IDE_CLK/2 = 25 MHz */ #if defined(HAVE_MULTIDRIVE) else /* MCICLK = PCLK/2 = 31MHz(HS) or PCLK/4 = 15.5 Mhz (STD)*/ MCI_CLOCK(drive) = (hs_card ? MCI_HALFSPEED : MCI_QUARTERSPEED); #endif /* CMD7 w/rca: Select card to put it in TRAN state */ if(!send_cmd(drive, SD_SELECT_CARD, card_info[drive].rca, MCI_ARG, NULL)) return -10; mci_delay(); /* * enable bank switching * without issuing this command, we only have access to 1/4 of the blocks * of the first bank (0x1E9E00 blocks, which is the size reported in the * CSD register) */ if(drive == INTERNAL_AS3525) { const int ret = sd_select_bank(-1); if(ret < 0) return ret -16; } card_info[drive].initialized = 1; return 0; } static void sd_thread(void) __attribute__((noreturn)); static void sd_thread(void) { struct queue_event ev; bool idle_notified = false; while (1) { queue_wait_w_tmo(&sd_queue, &ev, HZ); switch ( ev.id ) { #ifdef HAVE_HOTSWAP case SYS_HOTSWAP_INSERTED: case SYS_HOTSWAP_EXTRACTED: { int microsd_init = 1; fat_lock(); /* lock-out FAT activity first - prevent deadlocking via disk_mount that would cause a reverse-order attempt with another thread */ mutex_lock(&sd_mtx); /* lock-out card activity - direct calls into driver that bypass the fat cache */ /* We now have exclusive control of fat cache and ata */ disk_unmount(SD_SLOT_AS3525); /* release "by force", ensure file descriptors aren't leaked and any busy ones are invalid if mounting */ /* Force card init for new card, re-init for re-inserted one or * clear if the last attempt to init failed with an error. */ card_info[SD_SLOT_AS3525].initialized = 0; if (ev.id == SYS_HOTSWAP_INSERTED) { sd_enable(true); init_pl180_controller(SD_SLOT_AS3525); microsd_init = sd_init_card(SD_SLOT_AS3525); if (microsd_init < 0) /* initialisation failed */ panicf("microSD init failed : %d", microsd_init); microsd_init = disk_mount(SD_SLOT_AS3525); /* 0 if fail */ } /* * Mount succeeded, or this was an EXTRACTED event, * in both cases notify the system about the changed filesystems */ if (microsd_init) queue_broadcast(SYS_FS_CHANGED, 0); /* Access is now safe */ mutex_unlock(&sd_mtx); fat_unlock(); sd_enable(false); } break; #endif case SYS_TIMEOUT: if (TIME_BEFORE(current_tick, last_disk_activity+(3*HZ))) { idle_notified = false; } else { /* never let a timer wrap confuse us */ next_yield = current_tick; if (!idle_notified) { call_storage_idle_notifys(false); idle_notified = true; } } break; case SYS_USB_CONNECTED: usb_acknowledge(SYS_USB_CONNECTED_ACK); /* Wait until the USB cable is extracted again */ usb_wait_for_disconnect(&sd_queue); break; case SYS_USB_DISCONNECTED: usb_acknowledge(SYS_USB_DISCONNECTED_ACK); break; } } } static void init_pl180_controller(const int drive) { MCI_COMMAND(drive) = MCI_DATA_CTRL(drive) = 0; MCI_CLEAR(drive) = 0x7ff; MCI_MASK0(drive) = MCI_DATA_ERROR | MCI_DATA_END; MCI_MASK1(drive) = 0; #ifdef HAVE_MULTIDRIVE VIC_INT_ENABLE = (drive == INTERNAL_AS3525) ? INTERRUPT_NAND : INTERRUPT_MCI0; /* setup isr for microsd monitoring */ VIC_INT_ENABLE = (INTERRUPT_GPIOA); /* clear previous irq */ GPIOA_IC = (1<<2); /* enable edge detecting */ GPIOA_IS &= ~(1<<2); /* detect both raising and falling edges */ GPIOA_IBE |= (1<<2); #else VIC_INT_ENABLE = INTERRUPT_NAND; #endif MCI_POWER(drive) = MCI_POWER_UP | (MCI_VDD_3_0); /* OF Setting */ mci_delay(); MCI_POWER(drive) |= MCI_POWER_ON; mci_delay(); MCI_SELECT(drive) = 0; /* Pl180 clocks get turned on at start of card init */ } int sd_init(void) { int ret; CGU_IDE = (1<<6) /* enable non AHB interface*/ | (AS3525_IDE_DIV << 2) | AS3525_CLK_PLLA; /* clock source = PLLA */ CGU_PERI |= CGU_NAF_CLOCK_ENABLE; #ifdef HAVE_MULTIDRIVE CGU_PERI |= CGU_MCI_CLOCK_ENABLE; CCU_IO &= ~(1<<3); /* bits 3:2 = 01, xpd is SD interface */ CCU_IO |= (1<<2); #endif wakeup_init(&transfer_completion_signal); init_pl180_controller(INTERNAL_AS3525); ret = sd_init_card(INTERNAL_AS3525); if(ret < 0) return ret; #ifdef HAVE_MULTIDRIVE init_pl180_controller(SD_SLOT_AS3525); #endif /* init mutex */ mutex_init(&sd_mtx); queue_init(&sd_queue, true); create_thread(sd_thread, sd_stack, sizeof(sd_stack), 0, sd_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE) IF_COP(, CPU)); #ifndef BOOTLOADER sd_enabled = true; sd_enable(false); #endif return 0; } #ifdef HAVE_HOTSWAP bool sd_removable(IF_MD_NONVOID(int drive)) { return (drive==1); } bool sd_present(IF_MD_NONVOID(int drive)) { return (drive == 0) ? true : card_detect_target(); } #endif /* HAVE_HOTSWAP */ static int sd_wait_for_state(const int drive, unsigned int state) { unsigned long response = 0; unsigned int timeout = current_tick + 100; /* 100 ticks timeout */ while (1) { if(!send_cmd(drive, SD_SEND_STATUS, card_info[drive].rca, MCI_RESP|MCI_ARG, &response)) return -1; if (((response >> 9) & 0xf) == state) return 0; if(TIME_AFTER(current_tick, timeout)) return -2; if (TIME_AFTER(current_tick, next_yield)) { yield(); next_yield = current_tick + MIN_YIELD_PERIOD; } } } static int sd_select_bank(signed char bank) { int ret; unsigned loops = 0; do { if(loops++ > PL180_MAX_TRANSFER_ERRORS) panicf("SD bank %d error : 0x%x", bank, transfer_error[INTERNAL_AS3525]); ret = sd_wait_for_state(INTERNAL_AS3525, SD_TRAN); if (ret < 0) return ret - 2; if(!send_cmd(INTERNAL_AS3525, SD_SWITCH_FUNC, 0x80ffffef, MCI_ARG, NULL)) return -1; mci_delay(); if(!send_cmd(INTERNAL_AS3525, 35, 0, MCI_NO_FLAGS, NULL)) return -2; mci_delay(); memset(uncached_buffer, 0, 512); if(bank == -1) { /* enable bank switching */ uncached_buffer[0] = 16; uncached_buffer[1] = 1; uncached_buffer[2] = 10; } else uncached_buffer[0] = bank; dma_retain(); /* we don't use the uncached buffer here, because we need the * physical memory address for DMA transfers */ dma_enable_channel(0, aligned_buffer, MCI_FIFO(INTERNAL_AS3525), DMA_PERI_SD, DMAC_FLOWCTRL_PERI_MEM_TO_PERI, true, false, 0, DMA_S8, NULL); MCI_DATA_TIMER(INTERNAL_AS3525) = SD_MAX_WRITE_TIMEOUT; MCI_DATA_LENGTH(INTERNAL_AS3525) = 512; MCI_DATA_CTRL(INTERNAL_AS3525) = (1<<0) /* enable */ | (0<<1) /* transfer direction */ | (1<<3) /* DMA */ | (9<<4) /* 2^9 = 512 */ ; /* Wakeup signal from NAND/MCIO isr on MCI_DATA_ERROR | MCI_DATA_END */ wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK); /* Wait for FIFO to empty, card may still be in PRG state */ while(MCI_STATUS(INTERNAL_AS3525) & MCI_TX_ACTIVE ); dma_release(); } while(transfer_error[INTERNAL_AS3525]); card_info[INTERNAL_AS3525].current_bank = (bank == -1) ? 0 : bank; return 0; } static int sd_transfer_sectors(IF_MD2(int drive,) unsigned long start, int count, void* buf, const bool write) { #ifndef HAVE_MULTIDRIVE const int drive = 0; #endif int ret = 0; unsigned loops = 0; /* skip SanDisk OF */ if (drive == INTERNAL_AS3525) start += AMS_OF_SIZE; mutex_lock(&sd_mtx); #ifndef BOOTLOADER sd_enable(true); led(true); #endif if (card_info[drive].initialized <= 0) { ret = sd_init_card(drive); if (!(card_info[drive].initialized)) goto sd_transfer_error; } last_disk_activity = current_tick; dma_retain(); while(count) { /* 128 * 512 = 2^16, and doesn't fit in the 16 bits of DATA_LENGTH * register, so we have to transfer maximum 127 sectors at a time. */ unsigned int transfer = (count >= 128) ? 127 : count; /* sectors */ void *dma_buf; const int cmd = write ? SD_WRITE_MULTIPLE_BLOCK : SD_READ_MULTIPLE_BLOCK; unsigned long bank_start = start; /* Only switch banks for internal storage */ if(drive == INTERNAL_AS3525) { unsigned int bank = start / BLOCKS_PER_BANK; /* Current bank */ /* Switch bank if needed */ if(card_info[INTERNAL_AS3525].current_bank != bank) { ret = sd_select_bank(bank); if (ret < 0) { ret -= 20; goto sd_transfer_error; } } /* Adjust start block in current bank */ bank_start -= bank * BLOCKS_PER_BANK; /* Do not cross a bank boundary in a single transfer loop */ if((transfer + bank_start) > BLOCKS_PER_BANK) transfer = BLOCKS_PER_BANK - bank_start; } /* Set bank_start to the correct unit (blocks or bytes) */ if(!(card_info[drive].ocr & (1<<30))) /* not SDHC */ bank_start *= SD_BLOCK_SIZE; dma_buf = aligned_buffer; if(transfer > UNALIGNED_NUM_SECTORS) transfer = UNALIGNED_NUM_SECTORS; if(write) memcpy(uncached_buffer, buf, transfer * SD_BLOCK_SIZE); ret = sd_wait_for_state(drive, SD_TRAN); if (ret < 0) { ret -= 2*20; goto sd_transfer_error; } if(!send_cmd(drive, cmd, bank_start, MCI_ARG, NULL)) { ret -= 3*20; goto sd_transfer_error; } if(write) { dma_enable_channel(0, dma_buf, MCI_FIFO(drive), (drive == INTERNAL_AS3525) ? DMA_PERI_SD : DMA_PERI_SD_SLOT, DMAC_FLOWCTRL_PERI_MEM_TO_PERI, true, false, 0, DMA_S8, NULL); /*Small delay for writes prevents data crc failures at lower freqs*/ #ifdef HAVE_MULTIDRIVE if((drive == SD_SLOT_AS3525) && !hs_card) { int write_delay = 125; while(write_delay--); } #endif } else dma_enable_channel(0, MCI_FIFO(drive), dma_buf, (drive == INTERNAL_AS3525) ? DMA_PERI_SD : DMA_PERI_SD_SLOT, DMAC_FLOWCTRL_PERI_PERI_TO_MEM, false, true, 0, DMA_S8, NULL); MCI_DATA_TIMER(drive) = write ? SD_MAX_WRITE_TIMEOUT : SD_MAX_READ_TIMEOUT; MCI_DATA_LENGTH(drive) = transfer * SD_BLOCK_SIZE; MCI_DATA_CTRL(drive) = (1<<0) /* enable */ | (!write<<1) /* transfer direction */ | (1<<3) /* DMA */ | (9<<4) /* 2^9 = 512 */ ; /* Wakeup signal from NAND/MCIO isr on MCI_DATA_ERROR | MCI_DATA_END */ wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK); /* Wait for FIFO to empty, card may still be in PRG state for writes */ while(MCI_STATUS(drive) & MCI_TX_ACTIVE); last_disk_activity = current_tick; if(!send_cmd(drive, SD_STOP_TRANSMISSION, 0, MCI_NO_FLAGS, NULL)) { ret = -4*20; goto sd_transfer_error; } if(!transfer_error[drive]) { if(!write) memcpy(buf, uncached_buffer, transfer * SD_BLOCK_SIZE); buf += transfer * SD_BLOCK_SIZE; start += transfer; count -= transfer; loops = 0; /* reset errors counter */ } else if(loops++ > PL180_MAX_TRANSFER_ERRORS) panicf("SD Xfer %s err:0x%x Disk%d", (write? "write": "read"), transfer_error[drive], drive); } ret = 0; /* success */ sd_transfer_error: dma_release(); #ifndef BOOTLOADER led(false); sd_enable(false); #endif if (ret) /* error */ card_info[drive].initialized = 0; mutex_unlock(&sd_mtx); return ret; } int sd_read_sectors(IF_MD2(int drive,) unsigned long start, int count, void* buf) { return sd_transfer_sectors(IF_MD2(drive,) start, count, buf, false); } int sd_write_sectors(IF_MD2(int drive,) unsigned long start, int count, const void* buf) { #ifdef BOOTLOADER /* we don't need write support in bootloader */ #ifdef HAVE_MULTIDRIVE (void) drive; #endif (void) start; (void) count; (void) buf; return -1; #else return sd_transfer_sectors(IF_MD2(drive,) start, count, (void*)buf, true); #endif } #ifndef BOOTLOADER long sd_last_disk_activity(void) { return last_disk_activity; } void sd_enable(bool on) { #if defined(HAVE_BUTTON_LIGHT) && defined(HAVE_MULTIDRIVE) extern int buttonlight_is_on; #endif #ifdef HAVE_HOTSWAP static bool cpu_boosted = false; #endif if (sd_enabled == on) return; /* nothing to do */ if(on) { /* Enable both NAF_CLOCK & IDE clk for internal SD */ CGU_PERI |= CGU_NAF_CLOCK_ENABLE; CGU_IDE |= (1<<6); /* enable non AHB interface*/ #ifdef HAVE_MULTIDRIVE /* Enable MCI clk for uSD */ CGU_PERI |= CGU_MCI_CLOCK_ENABLE; #ifdef HAVE_BUTTON_LIGHT /* buttonlight AMSes need a bit of special handling for the buttonlight * here due to the dual mapping of GPIOD and XPD */ CCU_IO |= (1<<2); /* XPD is SD-MCI interface (b3:2 = 01) */ if (buttonlight_is_on) GPIOD_DIR &= ~(1<<7); else _buttonlight_off(); #endif /* HAVE_BUTTON_LIGHT */ #endif /* HAVE_MULTIDRIVE */ sd_enabled = true; #ifdef HAVE_HOTSWAP if(card_detect_target()) /* If SD card present Boost cpu for voltage */ { cpu_boosted = true; cpu_boost(true); } #endif } else { #ifdef HAVE_HOTSWAP if(cpu_boosted) { cpu_boost(false); cpu_boosted = false; } #endif sd_enabled = false; #ifdef HAVE_MULTIDRIVE #ifdef HAVE_BUTTON_LIGHT CCU_IO &= ~(1<<2); /* XPD is general purpose IO (b3:2 = 00) */ if (buttonlight_is_on) _buttonlight_on(); #endif /* HAVE_BUTTON_LIGHT */ /* Disable MCI clk for uSD */ CGU_PERI &= ~CGU_MCI_CLOCK_ENABLE; #endif /* HAVE_MULTIDRIVE */ /* Disable both NAF_CLOCK & IDE clk for internal SD */ CGU_PERI &= ~CGU_NAF_CLOCK_ENABLE; CGU_IDE &= ~(1<<6); /* disable non AHB interface*/ } } tCardInfo *card_get_info_target(int card_no) { return &card_info[card_no]; } #ifdef HAVE_HOTSWAP void card_enable_monitoring_target(bool on) { if (on) /* enable interrupt */ GPIOA_IE |= (1<<2); else /* disable interrupt */ GPIOA_IE &= ~(1<<2); } #endif /* HAVE_HOTSWAP */ #endif /* !BOOTLOADER */ #ifdef CONFIG_STORAGE_MULTI int sd_num_drives(int first_drive) { /* We don't care which logical drive number(s) we have been assigned */ (void)first_drive; return NUM_DRIVES; } #endif /* CONFIG_STORAGE_MULTI */