/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by amaury Pouly * * Based on Rockbox iriver bootloader by Linus Nielsen Feltzing * and the ipodlinux bootloader by Daniel Palffy and Bernard Leach * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "system.h" #include "kernel.h" #include "dma-imx233.h" #include "i2c-imx233.h" #include "pinctrl-imx233.h" /* Used for DMA */ struct i2c_dma_command_t { struct apb_dma_command_t dma; /* PIO words */ uint32_t ctrl0; }; #define I2C_NR_STAGES 4 /* Current transfer */ static int i2c_nr_stages; static struct i2c_dma_command_t i2c_stage[I2C_NR_STAGES]; static struct mutex i2c_mutex; static struct semaphore i2c_sema; void INT_I2C_DMA(void) { /* reset dma channel on error */ if(imx233_dma_is_channel_error_irq(APB_I2C)) imx233_dma_reset_channel(APB_I2C); /* clear irq flags */ imx233_dma_clear_channel_interrupt(APB_I2C); semaphore_release(&i2c_sema); } void imx233_i2c_init(void) { imx233_reset_block(&HW_I2C_CTRL0); /* setup pins (must be done when shutdown) */ imx233_set_pin_function(0, 30, PINCTRL_FUNCTION_MAIN); imx233_set_pin_function(0, 31, PINCTRL_FUNCTION_MAIN); /* clear softreset */ __REG_CLR(HW_I2C_CTRL0) = __BLOCK_SFTRST | __BLOCK_CLKGATE; /* Errata: * When RETAIN_CLOCK is set, the ninth clock pulse (ACK) is not generated. However, the SDA * line is read at the proper timing interval. If RETAIN_CLOCK is cleared, the ninth clock pulse is * generated. * HW_I2C_CTRL1[ACK_MODE] has default value of 0. It should be set to 1 to enable the fix for * this issue. */ __REG_SET(HW_I2C_CTRL1) = HW_I2C_CTRL1__ACK_MODE; __REG_SET(HW_I2C_CTRL0) = __BLOCK_CLKGATE; /* Fast-mode @ 400K */ HW_I2C_TIMING0 = 0x000F0007; /* tHIGH=0.6us, read at 0.3us */ HW_I2C_TIMING1 = 0x001F000F; /* tLOW=1.3us, write at 0.6us */ HW_I2C_TIMING2 = 0x0015000D; mutex_init(&i2c_mutex); semaphore_init(&i2c_sema, 1, 0); } void imx233_i2c_begin(void) { mutex_lock(&i2c_mutex); /* wakeup */ __REG_CLR(HW_I2C_CTRL0) = __BLOCK_CLKGATE; i2c_nr_stages = 0; } enum imx233_i2c_error_t imx233_i2c_add(bool start, bool transmit, void *buffer, unsigned size, bool stop) { if(i2c_nr_stages == I2C_NR_STAGES) return I2C_ERROR; if(i2c_nr_stages > 0) { i2c_stage[i2c_nr_stages - 1].dma.next = &i2c_stage[i2c_nr_stages].dma; i2c_stage[i2c_nr_stages - 1].dma.cmd |= HW_APB_CHx_CMD__CHAIN; if(!start) i2c_stage[i2c_nr_stages - 1].ctrl0 |= HW_I2C_CTRL0__RETAIN_CLOCK; } i2c_stage[i2c_nr_stages].dma.buffer = buffer; i2c_stage[i2c_nr_stages].dma.next = NULL; i2c_stage[i2c_nr_stages].dma.cmd = (transmit ? HW_APB_CHx_CMD__COMMAND__READ : HW_APB_CHx_CMD__COMMAND__WRITE) | HW_APB_CHx_CMD__WAIT4ENDCMD | 1 << HW_APB_CHx_CMD__CMDWORDS_BP | size << HW_APB_CHx_CMD__XFER_COUNT_BP; /* assume that any read is final (send nak on last) */ i2c_stage[i2c_nr_stages].ctrl0 = size | (transmit ? HW_I2C_CTRL0__TRANSMIT : HW_I2C_CTRL0__SEND_NAK_ON_LAST) | (start ? HW_I2C_CTRL0__PRE_SEND_START : 0) | (stop ? HW_I2C_CTRL0__POST_SEND_STOP : 0) | HW_I2C_CTRL0__MASTER_MODE; i2c_nr_stages++; return I2C_SUCCESS; } enum imx233_i2c_error_t imx233_i2c_end(unsigned timeout) { if(i2c_nr_stages == 0) return I2C_ERROR; i2c_stage[i2c_nr_stages - 1].dma.cmd |= HW_APB_CHx_CMD__SEMAPHORE | HW_APB_CHx_CMD__IRQONCMPLT; __REG_CLR(HW_I2C_CTRL1) = HW_I2C_CTRL1__ALL_IRQ; imx233_enable_interrupt(INT_SRC_I2C_DMA, true); imx233_dma_enable_channel_interrupt(APB_I2C, true); imx233_dma_reset_channel(APB_I2C); imx233_dma_start_command(APB_I2C, &i2c_stage[0].dma); enum imx233_i2c_error_t ret ; if(semaphore_wait(&i2c_sema, timeout) == OBJ_WAIT_TIMEDOUT) { imx233_dma_reset_channel(APB_I2C); ret = I2C_TIMEOUT; } else if(HW_I2C_CTRL1 & HW_I2C_CTRL1__MASTER_LOSS_IRQ) ret = I2C_MASTER_LOSS; else if(HW_I2C_CTRL1 & HW_I2C_CTRL1__NO_SLAVE_ACK_IRQ) ret= I2C_NO_SLAVE_ACK; else if(HW_I2C_CTRL1 & HW_I2C_CTRL1__EARLY_TERM_IRQ) ret = I2C_SLAVE_NAK; else ret = I2C_SUCCESS; /* sleep */ __REG_SET(HW_I2C_CTRL0) = __BLOCK_CLKGATE; mutex_unlock(&i2c_mutex); return ret; } void i2c_init(void) { } int i2c_write(int device, const unsigned char* buf, int count) { uint8_t addr = device; imx233_i2c_begin(); imx233_i2c_add(true, true, &addr, 1, false); /* start + addr */ imx233_i2c_add(false, true, (void *)buf, count, true); /* data + stop */ return imx233_i2c_end(TIMEOUT_BLOCK); } int i2c_read(int device, unsigned char* buf, int count) { uint8_t addr = device | 1; imx233_i2c_begin(); imx233_i2c_add(true, true, &addr, 1, false); /* start + addr */ imx233_i2c_add(false, false, buf, count, true); /* data + stop */ return imx233_i2c_end(TIMEOUT_BLOCK); } int i2c_readmem(int device, int address, unsigned char* buf, int count) { uint8_t start[2] = {device, address}; uint8_t addr_rd = device | 1; imx233_i2c_begin(); imx233_i2c_add(true, true, start, 2, false); /* start + addr + addr */ imx233_i2c_add(true, true, &addr_rd, 1, false); /* start + addr */ imx233_i2c_add(false, false, buf, count, true); /* data + stop */ return imx233_i2c_end(TIMEOUT_BLOCK); } int i2c_writemem(int device, int address, const unsigned char* buf, int count) { uint8_t start[2] = {device, address}; imx233_i2c_begin(); imx233_i2c_add(true, true, start, 2, false); /* start + addr + addr */ imx233_i2c_add(false, true, (void *)buf, count, true); /* data + stop */ return imx233_i2c_end(TIMEOUT_BLOCK); }