/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by Amaury Pouly * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "audioout-imx233.h" #include "clkctrl-imx233.h" #include "rtc-imx233.h" #include "pcm_sampr.h" void imx233_audioout_preinit(void) { /* Enable AUDIOOUT block */ imx233_reset_block(&HW_AUDIOOUT_CTRL); /* Enable digital filter clock */ imx233_enable_xtal_clock(XTAL_FILT, true); /* Enable DAC */ __REG_CLR(HW_AUDIOOUT_ANACLKCTRL) = HW_AUDIOOUT_ANACLKCTRL__CLKGATE; /* Set capless mode */ __REG_CLR(HW_AUDIOOUT_PWRDN) = HW_AUDIOOUT_PWRDN__CAPLESS; /* Set word-length to 16-bit */ __REG_SET(HW_AUDIOOUT_CTRL) = HW_AUDIOOUT_CTRL__WORD_LENGTH; /* Power up DAC */ __REG_CLR(HW_AUDIOOUT_PWRDN) = HW_AUDIOOUT_PWRDN__DAC; /* Hold HP to ground to avoid pop, then release and power up HP */ __REG_SET(HW_AUDIOOUT_ANACTRL) = HW_AUDIOOUT_ANACTRL__HP_HOLD_GND; __REG_SET(HW_RTC_PERSISTENT0) = HW_RTC_PERSISTENT0__SPARE__RELEASE_GND; __REG_CLR(HW_AUDIOOUT_PWRDN) = HW_AUDIOOUT_PWRDN__HEADPHONE; /* Set HP mode to AB */ __REG_SET(HW_AUDIOOUT_ANACTRL) = HW_AUDIOOUT_ANACTRL__HP_CLASSAB; /* Stop holding to ground */ __REG_CLR(HW_AUDIOOUT_ANACTRL) = HW_AUDIOOUT_ANACTRL__HP_HOLD_GND; /* Set dmawait count to 31 (see errata, workaround random stop) */ __REG_CLR(HW_AUDIOOUT_CTRL) = HW_AUDIOOUT_CTRL__DMAWAIT_COUNT_BM; __REG_SET(HW_AUDIOOUT_CTRL) = 31 << HW_AUDIOOUT_CTRL__DMAWAIT_COUNT_BP; } void imx233_audioout_postinit(void) { /* start converting audio */ __REG_SET(HW_AUDIOOUT_CTRL) = HW_AUDIOOUT_CTRL__RUN; } void imx233_audioout_close(void) { /* Switch to class A */ __REG_CLR(HW_AUDIOOUT_ANACTRL) = HW_AUDIOOUT_ANACTRL__HP_CLASSAB; /* Hold HP to ground */ __REG_SET(HW_AUDIOOUT_ANACTRL) = HW_AUDIOOUT_ANACTRL__HP_HOLD_GND; /* Mute HP and power down */ __REG_SET(HW_AUDIOOUT_HPVOL) = HW_AUDIOOUT_HPVOL__MUTE; /* Power down HP */ __REG_SET(HW_AUDIOOUT_PWRDN) = HW_AUDIOOUT_PWRDN__HEADPHONE; /* Mute DAC */ __REG_SET(HW_AUDIOOUT_DACVOLUME) = HW_AUDIOOUT_DACVOLUME__MUTE_LEFT | HW_AUDIOOUT_DACVOLUME__MUTE_RIGHT; /* Power down DAC */ __REG_SET(HW_AUDIOOUT_PWRDN) = HW_AUDIOOUT_PWRDN__DAC; /* Gate off DAC */ __REG_SET(HW_AUDIOOUT_ANACLKCTRL) = HW_AUDIOOUT_ANACLKCTRL__CLKGATE; /* Disable digital filter clock */ imx233_enable_xtal_clock(XTAL_FILT, false); /* will also gate off the module */ __REG_CLR(HW_AUDIOOUT_CTRL) = HW_AUDIOOUT_CTRL__RUN; } /* volume in half dB */ void imx233_audioout_set_dac_vol(int vol_l, int vol_r) { /* minimum is -100dB and max is 0dB */ vol_l = MAX(-200, MIN(vol_l, 0)); vol_r = MAX(-200, MIN(vol_r, 0)); /* unmute, enable zero cross and set volume. * 0xff is 0dB */ HW_AUDIOOUT_DACVOLUME = (0xff + vol_l) << HW_AUDIOOUT_DACVOLUME__VOLUME_LEFT_BP | (0xff + vol_r) << HW_AUDIOOUT_DACVOLUME__VOLUME_RIGHT_BP | HW_AUDIOOUT_DACVOLUME__EN_ZCD; } void imx233_audioout_set_hp_vol(int vol_l, int vol_r) { uint32_t select = (HW_AUDIOOUT_HPVOL & HW_AUDIOOUT_HPVOL__SELECT); /* minimum is -57.5dB and max is 6dB in DAC mode * and -51.5dB / 12dB in Line1 mode */ int min = select ? -103 : -115; int max = select ? 24 : 12; vol_l = MAX(min, MIN(vol_l, max)); vol_r = MAX(min, MIN(vol_r, max)); /* unmute, enable zero cross and set volume. Keep select value. */ HW_AUDIOOUT_HPVOL = (max - vol_l) << HW_AUDIOOUT_HPVOL__VOL_LEFT_BP | (max - vol_r) << HW_AUDIOOUT_HPVOL__VOL_RIGHT_BP | select | HW_AUDIOOUT_HPVOL__EN_MSTR_ZCD; } void imx233_audioout_set_freq(int fsel) { static struct { int base_mult; int src_hold; int src_int; int src_frac; }dacssr[HW_NUM_FREQ] = { HW_HAVE_8_([HW_FREQ_8] = { 0x1, 0x3, 0x17, 0xe00 } ,) HW_HAVE_11_([HW_FREQ_11] = { 0x1, 0x3, 0x11, 0x37 } ,) HW_HAVE_12_([HW_FREQ_12] = { 0x1, 0x3, 0xf, 0x13ff },) HW_HAVE_16_([HW_FREQ_16] = { 0x1, 0x1, 0x17, 0xe00},) HW_HAVE_22_([HW_FREQ_22] = { 0x1, 0x1, 0x11, 0x37 },) HW_HAVE_24_([HW_FREQ_24] = { 0x1, 0x1, 0xf, 0x13ff },) HW_HAVE_32_([HW_FREQ_32] = { 0x1, 0x0, 0x17, 0xe00},) HW_HAVE_44_([HW_FREQ_44] = { 0x1, 0x0, 0x11, 0x37 },) HW_HAVE_48_([HW_FREQ_48] = { 0x1, 0x0, 0xf, 0x13ff },) HW_HAVE_64_([HW_FREQ_64] = { 0x2, 0x0, 0x17, 0xe00},) HW_HAVE_88_([HW_FREQ_88] = { 0x2, 0x0, 0x11, 0x37 },) HW_HAVE_96_([HW_FREQ_96] = { 0x2, 0x0, 0xf, 0x13ff },) }; HW_AUDIOOUT_DACSRR = dacssr[fsel].src_frac << HW_AUDIOOUT_DACSRR__SRC_FRAC_BP | dacssr[fsel].src_int << HW_AUDIOOUT_DACSRR__SRC_INT_BP | dacssr[fsel].src_hold << HW_AUDIOOUT_DACSRR__SRC_HOLD_BP | dacssr[fsel].base_mult << HW_AUDIOOUT_DACSRR__BASEMULT_BP; #if 0 /* Select base_mult and src_hold depending on the audio range: * 0 < f <= 12000 --> base_mult = 1, src_hold = 3 (div by 4) * 12000 < f <= 24000 --> base_mult = 1, src_hold = 1 (div by 2) * 24000 < f <= 48000 --> base_mult = 1, src_hold = 0 (div by 1) * 48000 < f <= 96000 --> base_mult = 2, src_hold = 0 (mul by 2) * 96000 < f <= ..... --> base_mult = 4, src_hold = 0 (mul by 4) */ int base_mult = 1; int src_hold = 0; if(f > 96000) base_mult = 4; else if(f > 48000) base_mult = 2; else if(f <= 12000) src_hold = 3; else if(f <= 24000) src_hold = 1; /* compute the divisor (a tricky to keep to do it with 32-bit words only) */ int src_int = (750000 * base_mult) / (f * (src_hold + 1)); int src_frac = ((750000 * base_mult - src_int * f * (src_hold + 1)) << 13) / (f * (src_hold + 1)); HW_AUDIOOUT_DACSRR = src_frac << HW_AUDIOOUT_DACSRR__SRC_FRAC_BP | src_int << HW_AUDIOOUT_DACSRR__SRC_INT_BP | src_hold << HW_AUDIOOUT_DACSRR__SRC_HOLD_BP | base_mult << HW_AUDIOOUT_DACSRR__BASEMULT_BP; #endif } /* select between DAC and Line1 */ void imx233_audiout_select_hp_input(bool line1) { if(line1) __REG_SET(HW_AUDIOOUT_HPVOL) = HW_AUDIOOUT_HPVOL__SELECT; else __REG_CLR(HW_AUDIOOUT_HPVOL) = HW_AUDIOOUT_HPVOL__SELECT; }