/* * This config file is for the Apple iPod Video */ #define TARGET_TREE /* this target is using the target tree system */ #define IPOD_ARCH 1 /* For Rolo and boot loader */ #define MODEL_NUMBER 5 /* define this if you have recording possibility */ #define HAVE_RECORDING /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_44) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_44) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 320 #define LCD_HEIGHT 240 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ #define CONFIG_KEYPAD IPOD_4G_PAD /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50605 /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x80000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8758 audio codec */ #define HAVE_WM8758 #define AB_REPEAT_ENABLE 1 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* We can fade the backlight by using PWM */ #define HAVE_BACKLIGHT_PWM_FADING #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */ #ifndef SIMULATOR /* The Nano actually has a PP5021 - but it's register compatible with the 5020 so Rockbox doesn't care. */ /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5020 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* Type of mobile power */ #define CONFIG_BATTERY BATT_LIPOL1300 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define BATTERY_SCALE_FACTOR 5865 /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the hardware can be powered off while charging */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 #define CONFIG_LCD LCD_IPODVIDEO /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 #define USB_IPODSTYLE /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Virtual LED (icon) */ #define CONFIG_LED LED_VIRTUAL /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION /* Define this if you can read an absolute wheel position */ #define HAVE_WHEEL_POSITION /* define this if the device has larger sectors when accessed via USB */ /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */ #define MAX_SECTOR_SIZE 2048 #define BOOTFILE_EXT "ipod" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #endif