/* * This config file is for the Creative Zen X-Fi3 */ #define IMX233_SUBTARGET 3780 #define IMX233_PACKAGE IMX233_BGA169 #define IMX233_PARTITIONS IMX233_FREESCALE /* For Rolo and boot loader */ #define MODEL_NUMBER 83 #define MODEL_NAME "Creative Zen X-Fi3" /* Define if boot data from bootloader has been enabled for the target */ #define HAVE_BOOTDATA // HW supports it but our buffers don't fit. //#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192 #define HW_SAMPR_CAPS SAMPR_CAP_ALL_48 /* define this if you have recording possibility */ #define HAVE_RECORDING #define REC_SAMPR_CAPS SAMPR_CAP_ALL_96 /* Default recording levels */ #define DEFAULT_REC_MIC_GAIN 23 #define DEFAULT_REC_LEFT_GAIN 23 #define DEFAULT_REC_RIGHT_GAIN 23 /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR #ifndef BOOTLOADER #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* Define this if a programmable hotkey is mapped #define HAVE_HOTKEY */ /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT #define HAVE_BUTTONLIGHT_BRIGHTNESS /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* define this if you have LCD enable function */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING */ /* define this if you can flip your LCD #define HAVE_LCD_FLIP */ /* define this if you can invert the colours on your LCD #define HAVE_LCD_INVERT */ /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_IMX233 /* define this if you have a real-time clock with alarm facilities */ #define HAVE_RTC_ALARM #endif /* !BOOTLOADER */ /* define this if you have an i.MX23 codec */ #define HAVE_IMX233_CODEC #define CONFIG_TUNER STFM1000 /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS #define CONFIG_KEYPAD CREATIVE_ZENXFI3_PAD #define HAVE_HEADPHONE_DETECTION /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you have a speaker */ #define HAVE_SPEAKER /* LCD dimensions */ #define LCD_WIDTH 176 #define LCD_HEIGHT 220 /* sqrt(176^2 + 220^2) / 2.0 = 140.9 */ #define LCD_DPI 141 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Some Sansa Fuzes seem to be FAT16 formatted */ #define HAVE_FAT16SUPPORT /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 //#define AB_REPEAT_ENABLE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 0 #define MAX_BRIGHTNESS_SETTING 100 #define DEFAULT_BRIGHTNESS_SETTING 50 /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD #define NUM_DRIVES 2 #define HAVE_MULTIDRIVE #define HAVE_MULTIVOLUME #define HAVE_HOTSWAP /* Extra threads: touchpad */ #define TARGET_EXTRA_THREADS 1 /* todo */ #define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_TARGET /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have an IMX233*/ #define CONFIG_CPU IMX233 /* Define this if you want to use the IMX233 i2c interface */ #define CONFIG_I2C I2C_IMX233 /* define current usage levels (based on battery bench) */ #define CURRENT_NORMAL 35 #define CURRENT_BACKLIGHT 30 #define CURRENT_RECORD CURRENT_NORMAL /* maximum charging current */ #define CURRENT_MAX_CHG 200 /* Define this to the CPU frequency */ #define CPU_FREQ 454000000 /* Type of LCD */ #define CONFIG_LCD LCD_CREATIVEZXFI3 /* Offset ( in the firmware file's header ) to the file CRC and data. These are only used when loading the old format rockbox.e200 file */ #define FIRMWARE_OFFSET_FILE_CRC 0x0 #define FIRMWARE_OFFSET_FILE_DATA 0x8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK //#define USB_HANDLED_BY_OF #define USB_VENDOR_ID 0x041e #define USB_PRODUCT_ID 0x2020 #define HAVE_USB_HID_MOUSE #define HAVE_BOOTLOADER_USB_MODE /* The fuze+ actually interesting partition table does not use 512-byte sector * (usually 2048 logical sector size) */ #define MAX_LOG_SECTOR_SIZE 2048 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Define this on iMX233 if the boot process uses a dualboot stub */ #define HAVE_DUALBOOT_STUB #define BOOTFILE_EXT "creative" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define INCLUDE_TIMEOUT_API