/* * This config file is for the iriver H10 20Gb */ #define TARGET_TREE /* this target is using the target tree system */ /* For Rolo and boot loader */ #define MODEL_NUMBER 13 /* define this if you have recording possibility */ /*#define HAVE_RECORDING 1*/ /* TODO: add support for this */ /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP 1 /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR 1 /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* LCD dimensions */ #define LCD_WIDTH 160 #define LCD_HEIGHT 128 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ #define CONFIG_KEYPAD IRIVER_H10_PAD /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #ifndef BOOTLOADER #define CONFIG_RTC RTC_E8564 #endif /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x80000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8975 audio codec */ #define HAVE_WM8731 #define AB_REPEAT_ENABLE 1 /* FM Tuner */ /*#define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 *//* TODO: what is this? */ /* Define this for LCD backlight available */ #define CONFIG_BACKLIGHT BL_H10 /* TODO: figure this out, probably not necessary because of 'target' stuff */ #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */ #define AB_REPEAT_ENABLE 1 #ifndef SIMULATOR /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5020 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* Type of mobile power */ #define CONFIG_BATTERY BATT_LPCS355385 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 10 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define BATTERY_SCALE_FACTOR 4688 /* Hardware controlled charging */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* Define this to the CPU frequency */ #define CPU_FREQ 75000000 /* Type of LCD */ #define CONFIG_LCD LCD_H10_20GB /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST #define MIN_CONTRAST_SETTING 0 #define MAX_CONTRAST_SETTING 30 #define DEFAULT_CONTRAST_SETTING 14 /* Match boot contrast */ /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE * should be defined as well. * We can currently put the lcd to sleep but it won't wake up properly */ #define HAVE_LCD_SLEEP /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* #define USB_IPODSTYLE */ /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Virtual LED (icon) */ #define CONFIG_LED LED_VIRTUAL /* Define this if you have adjustable CPU frequency */ /*#define HAVE_ADJUSTABLE_CPU_FREQ*/ #define BOOTFILE_EXT "h10" #define BOOTFILE "rockbox." BOOTFILE_EXT #endif