Frank Gevaerts
478fc5baed
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18703 a1c6a512-1295-4272-9138-f99709370657
2008-10-03 22:43:16 +00:00
Daniel Stenberg
2acc0ac542
Updated our source code header to explicitly mention that we are GPL v2 or
...
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00
Frank Gevaerts
bec6aa3176
- change the usb class driver framework to allow for device classes with more than one interface or more than one endpoint pair
...
- move the charging-only dummy driver out of usb_core
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17252 a1c6a512-1295-4272-9138-f99709370657
2008-04-26 19:02:16 +00:00
Michael Sevakis
1eed012cfc
Add keywords and fix headers for files the usbstack files.
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17156 a1c6a512-1295-4272-9138-f99709370657
2008-04-18 17:05:15 +00:00
Frank Gevaerts
f0b4a32d6f
reorganise the usb stack to provide a clean separation between core and class drivers
...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16541 a1c6a512-1295-4272-9138-f99709370657
2008-03-06 21:25:09 +00:00
Frank Gevaerts
776d015cc4
implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu.
...
It stops sending data after a while for unknown reasons.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16486 a1c6a512-1295-4272-9138-f99709370657
2008-03-02 20:45:33 +00:00
Frank Gevaerts
07427592a9
Major USB stack improvements. It now works at nearly the maximum speed for a full speed connection, and does seem stable.
...
Still not enabled by default, #define USE_ROCKBOX_USB is still required to enable it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16360 a1c6a512-1295-4272-9138-f99709370657
2008-02-20 22:54:26 +00:00
Christian Gmeiner
94be71eab5
Add a working serial driver to usb stack. At the moment it simply echos back what it gets. You can test it on linux by
...
0) change relevant defines in usb_core.c
1) modprobe usbserial vendor=0x0781 product=0x7421 debug=1
2) picocom /dev/ttyUSB0
3) look at your logf screen if you build with logf support and enabled LOGF_ENABLE define in usb_serial.c
I also modified usb_core so that storage and serial both can make use the the 'usb_core'-thread. More will come :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15850 a1c6a512-1295-4272-9138-f99709370657
2007-11-30 00:13:00 +00:00
