On those models the software bootloader is entered through the SWI vector,
not through the reset vector like we thought.
Use put_uint32le() instead of memcpy
Use mov pc, #0x200 instead of b 0x200, so we can use the same instruction
for both vectors.
Tested on Clipv2 and Clip Zip
Change-Id: I99dc24167dde5558d34fe9795c65b44ff91aa665
Previously it applied to the whole file and you couldn't skip betweenn the
subtracks. Now it behaves consistently with real seperated tracks.
Change-Id: Ic1730ace142a05d9726b8c9afd67e94823651b60
We neet to setup the XPD to work as GPIO
storage unaffected
Tested on working-already Clipv2 and on a 'brickable' clipv2
Change-Id: Idcbdfb6bd50d51b7f6f7e00b21df24fac9b3a6d8
The configuration values for executable based TTS systems is stored in member
variables. Instead of reading them multiple times provide a function for that
and move searching the executable to the loading function.
Previously the executable was only searched in the path when opening the TTS
configuration. Having this in the loading function removes that unnecessary
step in case the TTS is in the path (and doesn't require additional
configuration).
Change-Id: I06799b55545dcb719ee3c916795b20e01c248a15
Instead of having a global quality setting for the encoder make the encoder
provide its default value by itself. Fixes the libmp3lame encoder using an
unsuitable value since the range differs greatly between the encoders.
Centralize reading the configuration values for rbspeex. The values are stored
in member variables, so it's not necessary to read them multiple times.
Change-Id: Ia26cb1fc3bb4f927d13212fe7883bdfe2571a711
Now lcd_framebuffer is the only framebuffer in the system. We still use a ARM-buffered buffer
which serve as an intermediate buffer for copying, to accomodate the requirement of the controller.
We implement lcd_update_rect() properly using this new scheme (this requires two little quirks),
this allows to implement lcd_blit_yuv with the right semantic (bypasses the framebuffer). YUV to RGB
conversion is still done in software but the DCP CSC should be able to do that but the hardware rotation
scheme is not the same as our software so it will require some tricks.
Change-Id: I0752e9c2f1a705d2e6a6010084e1f150965d8370
The old touchscreen_get() needed an external button_get() call. Now two APIs are
added that do this call internally. This way they behave similar to get_action.
The old API is preserved (but renamed) since it's used in reversi.
Change-Id: I24902c64a357f2fdd7d0c2f5371cbfd20f34f1c8
Plugins revert to grid mode currently. If they create a list the list ends
up in grid mode as well even if they use point mode due to settings in the core.
The expectation is that the lists use whatever mode they also use in the core.
Force setting in menu to have them behave the same in core and plugins.
Change-Id: I9534b2f21ccfa920eb2e48f66b04ecbda7a59011
Ubuntu defines _FORTIFY_SOURCE=2, which causes glibc longjmp() to check sp
when gcc optimization is enabled. The check does not allow longjmp() to be
used for switching threads and results in a "longjmp causes uninitialized
stack frame" error. This disables the check.
Change-Id: Idb8877b43ce711df880ca88875ba5477445a577a
Hoshi locations were hardcoded and only for board sizes 9, 13 and 19.
This new way has identical results for those board sizes, but
also places hoshi on other size boards.
There are no real standards for where hoshi should go on boards other
than 9, 13 and 19, but I think the results obtained are aesthetically
pleasing (and certainly better than not having any hoshi at all).
Change-Id: I08e449f17d782d212d5b1e16ebd7df52aec9ffb9
Reviewed-on: http://gerrit.rockbox.org/68
Reviewed-by: Björn Stenberg <bjorn@haxx.se>
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
ata_removable() and ata_present() no longer exist (ATA drives are never
removable with our current drivers), so storage.c shouldn't try to call
them from the wrapper functions. This was never noticed because these
wrapper functions are only used for multidriver code, which happens not
to be used with ATA currently.
Change-Id: Icb5e8cb27cdbef3edc0e51c35dc40dadf4f9de29
