On some devices, the button driver allows a "software poweroff" by long-
pressing a certain key. This behavior is inconvnient when that button needs
to be held down for other purposes, such as moving the cursor in rockpaint
or sgt-untangle.
This patch allows selectively disabling the software poweroff (enabled by
default) from both core and plugin code.
Change-Id: I7580752888ae5c7c7c5eb1be5966e3d67f17d4b4
Loop terminator needed a preincrement rather than postincrement, and
also used a proper #define instead of a magic number.
Change-Id: Iafd6a0dce0304cb94e4f1d04cce46d2ca603507a
User reported LCD screen corruption via forum in 3.14 and 3.15
turning backlight off and back on seems to fix the issue
http://forums.rockbox.org/index.php/topic,53192.0.html
Change-Id: Id0b34d2f9b77e79ab0ecabace331f0b203184724
No targets are enabled, but the hosted Hiby-based targets could have this
feature enabled if they weren't so buggy:
* No generic way to determine wakeup reason under Linux
* No generic way to be asynchronously notified if the alarm is
triggered when we're already awake
* Shutting down may clobber RTC wakeup (driver/etc dependent)
* Rocker's kernel's RTC driver has some 24h clock and timezone-related
issues.
So, the infrastructure is arguably useful, but the only applicable
hardware I have is pathologically brain-dead.
Change-Id: Ie1aa38e72b831c8a0695ff684f260e514eef9710
Only AGPTeck Rocker is enabled for now, and it doesn't work properly:
* No generic way to determine wakeup reason under Linux
* No generic way to be asynchronously notified if the alarm is
triggered when we're already awake
* Shutting down may clobber RTC wakeup (driver/etc dependent)
And finally:
* AGPTek kernel's RTC driver has some 24h clock and
some timezone-related issues.
So, the infrastructure is arguably useful, but the only applicable
hardware I have is pathologically brain-dead.
Change-Id: Iac6a26a9b6e4efec5d0b3030b87f456eb23fc01d
Once some missing power optimization stuff was added to the X3ii code,
they were completely identical.
Change-Id: I68e4db5e270e8ff22f91e521616a054bd7baa95d
On file systems with 2048 bytes per cluster, the bpb_secperclus value
gets multiplied by 4 when the meta data is loaded. This patch changes
the sanity check to consider (and reverse) that multiplication before
checking the cluster size.
Signed-off-by: Stefan Ott <stefan@ott.net>
Provided by Roman Stolyarov
Integration, Refactoring, and Upstreaming by Solomon Peachy
X3II confirmed working by forum tester, X20 is nearly identical.
This includes bootloader, main firmware, and the flash image patcher.
Eventual Todo:
* Further refactor AGPTek Rocker & xduoo hiby bootloaders
* Further refactor AGPTek Rocker & xduoo hosted platform code
Change-Id: I34a674051d368efcc75d1d18c725971fe46c3eee
For some reason it was defined as 'unsigned short' but all arguments to
the threading functions and other structs used size_t. The SDL plugin
tried to allocate a 2MB stack and this resulted in much badness.
This is a _very_ old bug, and might be responsible for countless subtle
bugs!
Change-Id: I8b7fd79a10c21e3ab524a89b4d40d9afa4fab638
The pp502x cache init code tries to flush the cache by reading
a block of DRAM. Change the starting point from 0x0 to 0x1000
so the compiler doesn't helpfully insert an undefined instruction
to deliberately crash the target.
(This behavior is intentional on the part of GCC, and was triggered
by using -Os with my experimental 4.9.4 toolchain)
Change-Id: I2d2719615a1164a035f3dac8a56dd3737bbab1d5
Stop gap till I get a chance to work on the root folder stuff
Makes whatever volume marked by bootdata.boot_volume
the base or root volume, mounts all other volumes after
the specified boot volume.
Has the effect of swapping the SD card to the slot for internal
and Internal storage is mounted as the Sd-card.
Does not honor root redirect -- uses .rockbox folder in the root of boot volume
Change-Id: I0f786aa0c8721e21cba607366775be3e3c0cf474
on timer_unregister callbacks are not removed
It seems (at least on the Rocker) timers continue to fire (for a bit??)
Now we store the registered callback in the sigev structure and check
that the callback matches the one registered when the timer is created.
This should stop the possible case of a new timer getting spurious callbacks
We also now NULL the callbacks on un-register which should stop the segfaults
Added some notes to timer.c and timer.h
Change-Id: Ia155c3a4e4af89f474d55ed845560ccc1fab85aa
7442742 ("iPod Classic: disable IRAM1") was causing subsequent ipod6g
bootloader builds to result in a completely black screen upon
installation, with recovery only possible with a reflash through DFU
mode.
IRAM1 is re-enabled for bootloader only.
Change-Id: I92d489c91f81cad55d66a8647c1e61a45f468770
Gives us the lowest HW sample rate that's >= 22KHz.
Needed because some targets that don't support 22K support 11K or 8K, so
HW_SAMPR_MIN will give us much lower quality than is acceptable.
Take advantage of this new macro in the SDL, MIDI, and MIKMOD plugins,
and implement a crude "fast enough" test to enable higher sample rates
on more capable targets.
Change-Id: I6ad38026fb3410c62da028e78512e027729bb851
The screen content is only poorly visible without backlight, it's not
really usable this way.
Removing HAVE_TRANSFLECTIVE_LCD also fixes the "flashing screen"
issue that appeared on some models when "lcd_awake()" is called.
Change-Id: I3ba954c944077a32016820462f782dc27a31f8d8
This reverts commit a89bf68e88.
HAVE_MULTIVOLUME && HAVE_MULTIDRIVE implicitly means "allow 4 volumes
per drive" whereas the normal MULTIDRIVE behavior is to only allow 1
volume per drive.
Addition of rtc support for AGPtEK ROCKER broke building the UI Simulator
for Windows. This patch removes the rtc support if building UI Simulator for
Windows.
Remove dependency on settings.g for bootloader
ifdef out AUDIOHW_HAVE_EQ Settings these should be indexing the
global_settings.hw_eq_bands[AUDIOHW_EQ_BAND_NUM] struct
Change-Id: I1d1a8556ef88ce43397b600261696dacdf372034
Adds:
sound_current(int setting)
returns the current sound setting from global_settings
complements sound_max, sound_min and sound_default
Change-Id: I35bd893753c958f808492906fe533edc51d5d57c
The Quake plugin is the only code that actually relies on float
formatting. Because Quake only runs on targets with huge memory
anyway, limiting their formatting to just those targets will minimize
the increased memory use in the core.
Change-Id: Icdbe26ec6ede564861cc01ac4add76a12b00ecd5
Wanted to see how gnarly it is to do.
Big number handling could be done with better algorithms
since it can get a bit slow with large integers or tiny
fractions with many lead zeros when only a few digits are
needed.
Anyway, it supports %e, %E, %f, %F, %g and %G. No %a or long
double support seems warranted at the moment.
Assumes IEEE 754 double format but it's laid out to be able to
replace a function to handle others if needed.
Tested in a driver program that has a duplicate vuprintf and
the content was pasted in once it looked sound enough to put
up a patch.
Change-Id: I6dae8624d3208e644c88e36e6a17d8fc9144f988
For unknown reasons, -thumb builds need -lfirmware after -lrbcodec (but
still before -lunwarminder)i. Other builds are still happy if we do that.
Including it via CORE_LIBS instead of explicitly achieves that.
Change-Id: Id69e4a0c042f90f71cfd9a72202ce4d8ef6a4181
