Reimplement voltage scaling on AMS Sansas at 1.10v during unboosted operation to improve runtimes. The voltage is now also boosted during disk access if a µSD is present. This prevents the µSD problems we saw on the last implementation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23193 a1c6a512-1295-4272-9138-f99709370657
Don't implement usb_enable() is HAVE_USBSTACK is not defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23185 a1c6a512-1295-4272-9138-f99709370657
Implement usb_enable()
Reorder/Modify usb_drv_init() to match closer the OF and remove a freeze
(USB registers were accessed before the USB module was enabled)
Add a panic in USB isr to be sure we notice when it's called
Reset GPIOA direction for usb_detect() to notice extraction
Add some comments
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23184 a1c6a512-1295-4272-9138-f99709370657
Remove useless E200V2 || FUZE || C200V2 : all those models have
MULTIDRIVE and/or HOTSWAP defined and have no specific difference.
Correct some comments
Remove HAVE_MULTIDRIVE within HAVE_HOTSWAP since HOTSWAP imply MULTIDRIVE
Change HOTSWAP to MULTIDRIVE where needed
Use NUM_DRIVES in sd_num_drives()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23180 a1c6a512-1295-4272-9138-f99709370657
See http://www.rockbox.org/irc/log-20091014#08:40:11 gcc warns on that one (it's perfectly valid code). It doesn't warn if you do this on plain arrays and since I have had this warning disabled I thought it would not warn on arrays of structs also.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23172 a1c6a512-1295-4272-9138-f99709370657
As these are called when parsing a skin it doesn't need to be called by the wps or settings, so make it local to skin_parser.c.
Reorder the members of struct wps_data for more effecient alignment.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23171 a1c6a512-1295-4272-9138-f99709370657
The bits which are not divider (i2si/i2so enable and clock selection)
would be unset.
This is not a problem in the current code since this function was always
called before starting playback (and setting those bits) but this might
be a problem when recording is enabled.
Finally it is simpler to read.
Thanks to Fred Bauer for pointing this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23156 a1c6a512-1295-4272-9138-f99709370657
We are unable to successfully put the pl180 controller into 4 bit mode so we should not put the cards into widebus mode for now.
The blocklength is hardcoded to 512 in sd.c and BLOCKLEN defaults to 512 so this command is not needed.
It appears the internal SD card is not HS capable but sending it the HS switch command does not seem to hinder it's init process.
Assume all SD_V2 cards are HS capable and send them the HS switch command.
If View disk info shows 50.0 MBit/s the card has HS timings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23137 a1c6a512-1295-4272-9138-f99709370657
- It is now an option under (A)dvanced.
- Configure will look through PATH for a sdl-config of a crosscompiled SDL.
- It should now in theory work on other platforms besides Linux. Untested.
- Should be easy to adapt to also work for the database and checkwps tools.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23136 a1c6a512-1295-4272-9138-f99709370657
of the line
Thanks to Teruaki Kawashima (teru) for providing this solution
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23132 a1c6a512-1295-4272-9138-f99709370657
- All theme authors have been contacted and agreed to relicense their theme
under the CC-BY-SA 3.0 unported license.
- Themes can still be used as GPLv2 or later if you like.
- The marquee theme is removed, as the author couldn't be contacted.
- An AUTHORS and COPYING file is added, containing a list of authors and the
full license text, respectively.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23131 a1c6a512-1295-4272-9138-f99709370657
See the manual for usage.
Flyspray: FS#10187
Author: myself, manual by David Kauffmann
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23130 a1c6a512-1295-4272-9138-f99709370657
