The stub is quite versatile: it can be loaded using bootrom or another other
means (like factory boot on Fiio X1). It relocates itself to TCSM0 and provides
basic functionality (it does not recover from failed read/writes at the moment).
Change-Id: Ib646a4b43fba9358d6f93f0f73a5c2e9bcd775a7
The jz code can do several useful things like dumping the IPL and SPL.
The Fiio code can play with backlight and has code do dump the IPL
and SPL with the correct parameters (extracted by reverse engineering).
Change-Id: I317b3174f5db8d38c9a56670c1d45565142ec208
This is a register description file for the JZ4760B. There are several
details worth noticing:
- it was obtained by gathering information from several sources/headers, but
since there are inconsistencies between them about the exact differences
between JZ4760 and JZ4760B, this file probably contains some errors
- the register names are not the same as the manual ones (which are not the
same as the one in the headers anyway): I dropped the "R" suffix on most
registers because it's redundant
- Ingenic likes to have read-only registers and then set/clr registers, with
very confusing names like DIR/DIRS/DIRC: in the file, the set/clr registers
are described as set/clr variants of the original register
- Parts of the description were obtained programmatically, which explains why
there are empty nodes or partially undocumented registers
Change-Id: I8da1d61e172e932e1a4a58ac0a5008f02b1751be
The code was not updated when I added support for list and other stuff, and thus
it did not properly sort by addresses.
Change-Id: Iaed0717b607beedfb2856c020c2a760e7a5667c5
The current implementation was custom and super slow. Since we use Crypto++
anyway, we might as well get use a good implementation.
Change-Id: I761ad7401653471e54000e1c2bc3d9882378112f
Instead of having our own copy of the AES code, use a good library to do that.
Crypto++ is well-maintained, supports a lot of ciphers, works on many OSes, and
is optimized for many architectures.
Change-Id: I7d7d24b47993206d7338c5f9bac8bbdd3915a667
It was a mess, a mix of crypto_* and cbc_mac calls. I made everything call crypto
functions, and also separate key setup from cryptographic operations, this will
be useful to speed up the code in the upcoming commits. Drop support for "usbotp"
key, since the crypto code for that was never mainlined and we can always get the
keys from a device as long as we have code execution (using the DCP debug registers).
Change-Id: I7aa24d12207ffb744225d1b9cc7cb1dc7281dd22
The overriding of the IV and real key should be the exception, there is no
need to manually set them to false.
Change-Id: Id66754f20a79aa5c1a991839345d1242e0aa587d
The old code had some annoying way of dealing with padding by adding explicit
instructions to the stream, which is 1) ugly 2) not in par with freescale
tools. The trick, which this new version implements, is to put the useful length
of the section in the section header, and the actual (with padding) length in
the boot tag. This way the tools can just ignore padding instruction by
reading the section header, and the bootloader can still load the image because
it uses the boot tags.
Also correctly handle the case where the first section does not start right
after the header (there is a bug in freescale tools for this case by the way).
There is an ambiguity in the way the padding instructions should be encrypted:
the bootloader should logically treat them as regular instruction of the section
stream, but it appears the freescale tools do not generate them as part of the
stream and instead encrypt them like boot tags, which is stupid because there
is no way the bootloader could decrypt them, and anyway we don't care because
the bootloader doesn't decrypt them at all.
Change-Id: Iabdc1d1f9f82d374779bf03efb75c2c3998f5b5d
The cool now takes the database as a hint and will not complain if the device
returns less data. The tool also supports user provided size and raw node numbers
that are not in the database (advanced usage).
Change-Id: I8cec536718d7eff01c7803bea648d6122b82377a
We don't know the encryption method, the KAS is completely different but it
might be useful to record it anyway for future purposes. MID extracted from
device, Japanese NW-A35.
Change-Id: I4c4bb5b063da99003b5c316061d8c490b77428a4
It is Android based and despite the fact that Sony wrote an NVP driver for it,
experiments suggest it is unused because it returns ff all the time...
Change-Id: I37750b659e341b21bed5ebaccf60f9f5fe569f64
Don't use colors since the terminal doesn't support it. Also packing is broken
on MinGW so use #pragma pack when compiling for windows, this is also supported
by MSCV.
Change-Id: I635649d52ed5f2e0af46cb9ca2ec325955b2ddb2
Split the ugly firmware read/write into a API function and a much simplified code.
Also the code can now report progress.
Change-Id: I3f998eaf0c067c6da42b1d2dd9c5a5bf43c6915d
Sanitize the whole library by hiding most of the horrible details of the
implementation. This means that all logical/drive/table attributes are exported
in structures that are internally filled by higher-level API functions. This makes
the code much more readable and prepares for a split between scsitool and the stmp
scsi library.
Change-Id: Id85d450b25cf99cd7c0896c6fc35bcd00babe9e1
Several tools need to perform raw SCSI commands, and we need to support Linux,
Windows and Mac OS, without pulling tons of dependencies to build it easily.
This very simple library has no dependency and supports Linux.
TODO:
- windows
- mac os
Change-Id: I496f5ad2490bd3e96ad962d31cce4e511a523c3a
We cannot auto-detect a device if we don't know its model ID, but we can't know
the model ID if we haven't decrypted the upgrade which requires the key. The only
way to solve this chicken-and-egg problem is to get the NVP table from kernel,
create an empty series in the database (no model ID), then get the key using
scsitool and forcing the model (using this commit), then decrypt the upgrade
and get the model ID list.
Change-Id: I8eced486a5f6a1a99028b25fdc4f87a3b11e31a8
We already use Crypto++ for DES anyway, and using OpenSSL is not great because
of its incompatible licence.
Change-Id: I78771b84c1708795a0c0c30afa5bdfe4885dea4e
Although this does bug is never triggered because we never decrypt and use the
resulting CBC-MAC, it's a major overlook.
Change-Id: I3c5d318e6428d528483bf888ea284e9ded3889f0
- hwstub load now properly stops reading the log when the device returns a 0
size buffer instead of STALLing
- add debug output option to hwstub_load
- correctly report transfered size on write error
- add some debug error message in usb code so that some errors can be diagnosed
more easily
- add a batch mode to hwstub_shell to disable the interactive shell
- increase usb control timeout to 1sec, 100ms was really tight
- cap usb buffer size to ~4000 bytes because libusb has a hardwired limit of
4096 bytes for control transfers
Change-Id: Id3200ab99ce70a7a3b09ce7faeaafa4a0fac64c7
Since ext3 supports ext2, we can support more platforms. Some platforms use ext4
with a very specific set of options, we I haven't encountered those yet so it's
not currently a problem.
Change-Id: Iff87e925a4caa866c6a66b1883ad6baab88c0b8d
The unsigned function were deprecated and hidden begind a compat flag. Since
they will get removed in the next version, I simply reimplemented them, those
are mostly casts anyway.
Change-Id: Ie5db81d7c8589b1e5e9b45a2a4ed41919aa07387
The new code gets closer to an actual bootloader:
- it provides a menu with three options: Sony, Rockox, tools with icons (and
extracts the Sony logo from the NVP)
- the dualboot install script now creates a symlink from /.rockbox to
/contents/.rockox which is necessary to run rockbox
- more text drawing / framebuffer functions
In the long run, we will move this under bootloader/ and rbutil/ and also use
firmware/ drawing facilities, at the moment we use OF display program which
is slow and creates some flickering.
The logo extraction/placement code was tested with resolution 240x320 and I
guessed some reasonable values for 240x400, but those will probably need some
tweaking.
Change-Id: I0319be902d21a7d33c1dee0fffdb4797065dbf8a
Now that we have a nice database of player index, the scsitool becomes more
useful and supports a lot more players. I did some general cleanup of the code,
though eventually it would be nice to really split it into a library and a CLI.
The SCSI vendor command allow to read but also write most NVP nodes. Since there
seems to a demand to change destination and sound pressure settings on device,
I implement this feature in the tool. I do not plan to allow arbitrary NVP
writes because this could easily brick the device. Changing the destination
should be safe, but as usual, use at your own risks.
Change-Id: Iff4e8cc3ac97b965c1df849051c5fd373756cda5
Using the database, we can now safely read/write the NVP. I also add more
support for Sony's "display" tool.
Change-Id: I8439fe9bad391c7f29859d99f236781be7983625
There must be an evil genius in Sony's Walkman division. Someone who made sure
that each model is close enough to the previous one so that little code is needed
but different enough so that an educated guess is not enough.
Each linux-based Sony player has a model ID (mid) which is a 32-bit integer.
I was able to extract a list of all model IDs and the correspoding name of
the player (see README). This gives us 1) a nice list of all players (because
NWZ-A729 vs NWZ-A729B, really Sony?) 2) an easy way to find the name of player
programatically. It seems that the lower 8-bit of the model ID gives the storage
size but don't bet your life on it. The remaining bytes seem to follow some kind
of pattern but there are exceptions.
From this list, I was able to build a list of all Sony's series (up to quite
recent one). The only safe way to build that is by hand, with a list of series,
each series having a list of model IDs. The notion of series is very important
because all models in a series share the same firmware.
A very important concept on Sony's players is the NVP, an area of the flash
that stores data associated with keys. The README contains more information but
basically this is where is record the model ID, the destination, the boot flags,
the firmware upgrade flags, the boot image, the DRM keys, and a lot of other stuff.
Of course Sony decided to slightly tweak the index of the keys regularly over time
which means that each series has a potentially different map, and we need this map
to talk to the NVP driver. Fortunately, Sony distributes the kernel for all its
players and they contain a kernel header with this information. I wrote a script
to unpack kernel sources and parse this header, producing a bunch of nw-*.txt
files, included in this commit. This map is very specific though: it maps Sony's
3-letter names (bti) to indexes (1). This is not very useful without the
decription (bti = boot image) and its size (262144). This information is harder
to come by, and is only stored in one place: if icx_nvp_emmc.ko drivers, found
on the device. Fortunately, Sony distributes a number of firmware upgrade, that
contain the rootfs, than once extracted contain this driver. The driver is a
standard ELF files with symbols. I wrote a parsing tool (nvptool) that is able
to extract this information from the drivers. Using that, I produced a bunch
of nodes-nw*.txt files. A reasonable assumption is that nodes meaning and
size do not change over time (bti is always the boot image and is always
262144 bytes), so by merging a few of those file, we can get a complete picture
(note that some nodes that existed in older player do not exists anymore so
we really need to merge several ones from different generations).
The advantage of storing all this information in plain text files, is that it
now makes it easy to parse it and produce whatever format we want to use it.
I wrote a python script that parses all this mess and produces a C file and
header with all this information (nwz_db.{c,h}).
Change-Id: Id790581ddd527d64418fe9e4e4df8e0546117b80
0e2b490 introduced rework of usb driver which was broken. It was reverted
in f2da975 to restore hwstub functionality on ATJ.
This commit reenables usb rework AND fixes remining issues.
The problem was with 0 length OUT thransfers. Additionally
a few cleanups were made.
Change-Id: I529ea9ad6540509e9287ca7e1cd2b44369b03cbb
This reverts commit 0e2b4908d0.
Although I swear it was tested it apparently broke hwstub on atj.
I will need to investigate more whats going on. Revert for now.
Change-Id: I2ff3adf8c72bb0e53be7d81b975382adfb700eab
Sony added extensions to the frambuffer interface. It is important to take them
into account since the OF uses them and might leave the framebuffer in an
unusual state which would make the dualboot not display anything. Also rework
the dualboot code so that it can boot rockbox (not doing anything at the moment),
display all tools or boot the OF.
Change-Id: Ia0f589c9ec8558f375270841503c0964aff07f0b
At the moment, the script install_duaboot does the following:
- rename SpiderApp to SpiderApp.of (unless it already exists)
- install payload as SpiderApp
- fixes permissions
Since SpiderApp is the main app, it will execute instead of the OF.
The current dualboot code (dualboot.c) is still a preliminary but the current
version displays an "all tools" menu to choose for. When exitting the menu
using BACK, it will run the OF.
With the modifications made by the install script, it should not be possible
to break the device. In the worst case scenario, the dualboot code crashes
and it restarted by the sysmgrd, or hangs. A safe way to recover is to plug
the USB cable and reset the device: the system manager will then start the
USB app and one can reflash the device if necessary.
Change-Id: Id9edab0347538ad2a8651a28aea7fd083feaa626
Unify series names: e46x -> e460 to be consistent with Sony' name. Add keys
for various players that were cracked using upgtools. The real KAS would need
to be extracted from a target but at least we can open/create firmware upgrades.
Change-Id: Id23a10e10170d7f6330c6699bf205c4df5ddebfe
This new tool (all_tools) embeds all the other tools and provides a menu to
choose which one to run.
Change-Id: I0e07864dd46559a7079b0f942c25155e6fa07112
Since the nwz_lib does not have any nvp code yet, it's quite of ugly hack
with hardcoded nvp node (11) for shipment information (shp). Thus I whitelisted
two series (NWZ-E460 and NWZ-A860) which I know for sure use this node ID.
Change-Id: I94c9b0db1f9d7ad764d2aa50576a911e710f25e1
This list can map from model id to device name. It was automatically extracted
from Sony's tools. In the future, we will probably generate it from a clean
database containing more useful information.
Change-Id: Ibe580edf25b60bf0bf4aef4a06f40dddd19c5404
This is useful because there is no easy way to get it except from Sony's tool,
unless one knows the npv node, but that requires to know the model already...
Change-Id: I202f7cdb2f7cf924cc5bdb53c17e34600d4bf153
The new search has two new features:
- it takes advantage of the fact that DES keys are only 56-bit long (and not 64)
- it is now multithreaded
As a proof of concept, I ran it on the A10 series firmware upgrade and was able
to find the key in a few seconds using 4 threads. The search is still limited
to ascii hex passwords (seems to work on all devices I have tried thus far).
Change-Id: Ied080286d2bbdc493a6ceaecaaadba802b429666
This is code is intended to development into a library of code for the NWZ that
will be useful to write the "bootloader" on those device. At the same time, it
comes with test programs that are easy to run in firmware upgrade mode and also
provide a great test bench for the library. At the moment, two test programs are
available:
- test_display: simply prints two messages using /usr/bin/lcdmsg
- test_keys: displays input key event
Change-Id: I9d214894ffc9127b528fcdd3eb5d6b61f4e657a7
The exec_file allows to embed a script/executable and run it on target. It takes
of unpacking, remounting contents rw and redirect output to exec.txt at the root
of the drive. More generally, rework how the makefile works.
Change-Id: Iec719227be96e80701ad8f5398d2d34389f4da9e
There was a lot of copy and paste, and the code was just crap. This commit tries
to clarify the code and also document the encryption procedure. Hopefully I didn't
break anything.
Change-Id: I257793010e7cf94f2b090b30bb8608359d3886e3
This new header generator works differently from the previous one:
- it uses the new format
- the generated macro follow a different style (see below)
- the generated macro are highly documented!
- it supports SCT-style platform or RMW-style ones
Compared to the old style, the new one generate a big set of macros per
register/field/enum (loosely related to iohw.h from Embedded C spec). The user
then calls generic (names are customizable) macros to perform operations:
reg_read(REG_A)
reg_read(REG_B(3))
reg_read_field(REG_A, FIELD_X)
reg_read_field(REG_B(3), COOL_FIELD)
reg_write(REG_A, 0x42)
reg_write_field(REG_A, FIELD_X(1), FIELD_Y(3), IRQ_V(FIQ))
reg_write_fielc(REG_B(3), COOL_FIELD_V(I_AM_COOL), BLA(42))
the following use RMW or SET/CLR variants, depending on target:
reg_set_field(REG_A, FLAG_U, FLAG_V)
reg_clr_field(REG_A, FIELD_X, FIELD_Y, IRQ)
reg_clr_field(REG_B(3), COOL_FIELD, BLA)
the following does clear followed by set, on SET/CLR targets:
reg_cs(REG_A, 0xff, 0x42)
reg_cs(REG_B(3), 0xaa, 0x55)
reg_cs_field(REG_A, FIELD_X(1), FIELD_Y(3), IRQ_V(FIQ))
reg_cs_field(REG_B(3), COOL_FIELD_V(I_AM_COOL))
The generator code is pretty long but has lots of documentation and lots of
macro names can be customized.
Change-Id: I5d6c5ec2406e58b5da11a5240c3a409a5bb5239a
Although the jz4740 contains a similar tool to usbboot, its command-line
interface is not very useful, also it does not compile by default because it
relies on some external code, and it contains code specific to some JZ4740
devices.
Change-Id: I22688238d147e21fb0fd524466b333b6003d4ff1
This commit adds support for the version of the hwstub library, which requires
a lot of changes. It also adds some editing features, such as register access
and much better editing of fields using the mouse (double click on a field
to be able to resize and move it).
Change-Id: I3c4e4cc855cb44911c72bc8127bad841b68efe52
Registers (and variants) can now specify the type of access supported:
- unspecified: for variant means same as register, for register defaults R/W
- read/write
- read only
- write only
Backward compatibility is preserved by setting access to unspecified by default.
Change-Id: I3e84ae18f962a45db62f996a542d08405d05b895
Also use this opportunity to cleanup support for multiple devices: the shell
now supports dynamic changes in the device and will call init() everytime
a new device is selected, to prepare a new environment. The shell now
honors register width on register read/write. The shell also provides access
to variants as follows by creating a subtable under the register using the
variant type in UPPER case and having the same layout as a register.
For example if register HW.GPIO.DIR has variants "set" and "clr", those can
be used like this:
HW.GPIO.DIR.SET.write(0xff)
HW.GPIO.DIR.CLR.write(0xff00)
Change-Id: I943947fa98bce875de0cba4338e8b7196a4c1165
Rewrite the hwstub library in C++, with a clean and modular design.
The library was designed from the ground up to be aware of multithreading
issues and to handle memory allocation nicely with shared pointers.
Compared to the original library, it brings the following major features:
- support for JZ boot devices, it is very easy to add support for others
- support for network transparent operations (through sockets): both tcp
and unix domains are support
Change-Id: I75899cb9c7aa938c17ede2bb3f468e7a55d625b4
After being caught by several bugs of the type "let's forgot to initialize
a field to default value", I'm finally fixing this.
Change-Id: I01c33e0611d4f697f767db66465e4fb30858cdab
The parser would simply ignore unknown elements or attributes, which is bad
on many levels. Now any unknown tag will trigger a fatal error.
Change-Id: I32eead8e96c1567241cf2a565d9e20e62877c14d
This big commit port qeditor from v1 to v2 register file format. Although
the display code was much simplified, the edit code had to be rewritten.
The new code also brings many improvement to the register display widget.
The new code also compiles with both Qt4 and Qt5, although it is recommended
to use Qt5 to get some improvements, especially in the layout of editor.
Change-Id: I24633ac37a144f25d9e705b565654269ec9cfbd3
A v2 register description file can now include register variants and instances
addresses can now be a list (previously it could only be a stride or a formula).
Update the library to deal with that. The convert option of swiss_knife was
updated and one incompatible change was introduce: if a v1 device has several
addresses, those are converted to a single v2 instance with list (instead of
several single instances). This should have been the behaviour from the start.
Swiss_knife can now also convert regdumps, in which case it needs to be given
both the dump and register description file. Also introduce two register
descriptions files (vsoc1000 and vsoc2000) which give more complicated examples
of v2 register description files.
Change-Id: Id9415b8363269ffaf9216abfc6dd1bd1adbfcf8d
With this you can upload and run code on DSP core in atj213x.
The files can be produced using as2181. You can download
this assembler from https://github.com/wodz/as2181
You should use extended mode (-x switch) since DSP core
in atj is non standard and uses 24bit operands.
PX register has different meaning as well and is used as MSB
when loading other registers with immediates (immediate field
is 16bit in instruction so to set register to 24bit value
you need to store MSB in PX prior to this).
MAC MR is 56bit accordingly.
HIP interface seems to be mapped at standard addresses
(except that regular 218x doesn't have HIP).
Have a fun!
Change-Id: I9a80ca0dd3718ba8435ae8579bfffa66e067e022
This uses slightly hacked luaprompt to provide all the goodis.
See https://github.com/dpapavas/luaprompt for original.
Change-Id: Iedddb79abae5809299322bc215722dd928c35cca
When building in the current tree (i.e. buildfolder ending up as '.') creating
the filename to use in the zip file stripped all '.' characters. Use a
different way to create the filename to avoid this.
Change-Id: I139c404d5e83a8bcb028a9a22b125f238911e405
version.h doesn't store the version number as string anymore. Update
findversion to use the individual values instead.
Change-Id: I6bf0fdd4420d41279b44cffd22b42febbfc778ce
This tool can pack/unpack a jz4760 archive (like the one used for the fiio
x1/x3/x5), and can descramble/scramble (it's the same operation) a firmware
file (the sys.bin file in the archive). I did my best to keep the compatibility
with the leaked Fiio/Ingenic tool which has the same name.
I wrote the tools from scratch, but here are some remarks:
- the format used is a slightly modified IHFS used in the older JZ4640 series,
I used the information on the wiki about the IHFS format
- the CRC computation done was already reversed engineered by someone on the
forums but I realised this later
- There are a few unknown fields in the headers, see comments in the source code
- The firmware scrambling was discovered by pure guess, I realised there were
some repetitve sequences, some I guessed it was a rotative XOR and ran some
analysis to find the most probable sequence
Change-Id: Ib83735b3db8475be5de9c94231714e88668a0340
The solution is a bit hacky as it simply call make in libs
directory as pre-dependency. Clean doesn't touch libs.
Change-Id: Ib447a48fd87cc41228944f17444474a55d393543
Catched by swiss_knife check there are some overlaping fields
and invalid characters in some names.
Change-Id: Ia26ffd2e29452f4ddd9f8229f78bb2a2cc325ab4
The WRITE() macro checks if the "fw" pointer
is open upon fwrite() error. Since fw was
not initialized before use, it might crash for non-zero fw.
cppcheck reported.
[utils/jz4740_tools/HXFreplace.c:187]: (error) Uninitialized variable: fw
Change-Id: I558170f9f17828c9fd515a5da36ad8b5cb30a9ad
The variable 'i' should actually be 'size'.
See the read_reg() function above it.
Confirmed via private email from Maurus Cuelenaere. Thanks!
(who also remembered having trouble reading/setting
registers over USB back then ;))
cppcheck reported:
[rockbox/utils/jz4740_tools/jz4740_usbtool.c:281]: (error) Uninitialized variable: i
Change-Id: I0f34834335e89d2504e7597e8db22cf69b5ca7e7
cppcheck reported:
[utils/zenutils/source/update_patch/main.cpp:105]: (performance) Passing the result of c_str() to a function that takes std::string as argument no. 1 is slow and redundant.
Change-Id: Ied9de135e693af22e1fdc3aa3b67d14b7d2c21e6
The variable 'len' is not used after this statement.
Probably a copy'n'paste leftover from the similar
looking block above.
cppcheck reported:
[rockbox/utils/zenutils/source/shared/cenc.cpp:212]: (style) Same expression on both sides of '-'.
Change-Id: Ia8357187ed39d3fab10d97df75a1146c4f733790
cppcheck reported:
[rockbox/utils/imxtools/sbtools/sb1.c:440]: (warning) Comparison of a boolean expression with an integer other than 0 or 1.
Thanks to Thomas Jarosch
Change-Id: I0078232706d4014a1f2acea310a7a0d0edf7788b
This one is much more efficient than using a generic table widget.
Change-Id: I3578964eead746e656f6b0a8dcec0f8442deb13d
Reviewed-on: http://gerrit.rockbox.org/1022
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
With the previous code, tab names would be ignored if tab is detached
which can happen early on.
Change-Id: I9eac4202850f3e79a04590a4ba1444850ec6a583
Reviewed-on: http://gerrit.rockbox.org/986
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The current code assumed that READ/WRITE would produce atomic read/writes for
8/16/32-bit words, which in turned put assumption on the memcpy function.
Since some memcpy implementation do not always guarantee such strong assumption,
introduce two new operation READ/WRITE_ATOMIC which provide the necessary
tools to do correct read and write to register in a single memory access.
Change-Id: I37451bd5057bb0dcaf5a800d8aef8791c792a090
Because Qt doesn't support QObject multiple inherance, it is a bit tricky
to have a base class which interact with the UI. The register tab name
now display:
- file dump name (for dumps)
- hwstub device path (for hwstub)
And the register editor display the filename
Change-Id: If2579992098c02627c67d560c824f1668e73bc45
Reviewed-on: http://gerrit.rockbox.org/979
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code did not call xmlInitParser() and would call xmlCleanupParser() each
time which is doubly wrong because 1) it's not init 2) all init/cleanup
must be done from the main thread. To ensure 2), call it from a static ctor.
Change-Id: I3d191bf3b8c0cfc51da78157e88c786636fd3ebf
Reviewed-on: http://gerrit.rockbox.org/966
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
A older commit removed this ability but it tends to be a problem since the HID
driver can prevent probing of transfer size which then needs to be entered
by hand on the command line.
Change-Id: Ie5a556ffdcc2adec0e1c984810983e19136b6473
This script is handy hacking tool to patch RKW file with
arbitrary binary and put jump into implanted code.
It also shows how to use hwstub crc routine.
Change-Id: I89b5086dc1ddaca3dbc03df26a85472d8a20d51e
This tool is a scriptable (lua) tool to patch binaries, it supports:
- raw binary
- ELF
- SB(v1/v2)
It also contains some basic routines to parse and generate useful arm/thumb code
like jump or register load/store. This is very useful to take a firmware and
patch an interrupt vector or some code to jump to an extra payload added to
the binary. Examples are provided for several STMP based target which the payload
is expected to be hwstub, and also for the Sansa View. A typical patcher usually
requires three elements:
- the lua patcher itself
- the payload (hwstub for example)
- (optional) a small stub either to jump properly to the payload or determine
under which circumstance to do the jump (hold a key for example)
Change-Id: I6d36020a3bc9e636615ac8221b7591ade5f251e3
