Michael Sevakis
|
98246b82b9
|
i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29113 a1c6a512-1295-4272-9138-f99709370657
|
2011-01-22 16:58:17 +00:00 |
|
Michael Sevakis
|
021f9e9e56
|
Changed a macro to a raw in int constant. Didn't mean to do that. Put it back right.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25838 a1c6a512-1295-4272-9138-f99709370657
|
2010-05-06 03:30:59 +00:00 |
|
Michael Sevakis
|
a36a498c57
|
i.MX31/Gigabeat S: This should fix stability problems. One problem was to start using the DVFS controller properly so that interrupts will be masked at the lowest and highest frequency indexes. Millions of useless interrupts were occurring at 132MHz because its index was 2, not 3, which masks it automatically when it can't go slower. Stopping the flood was enough to actually see the difference in general. IRQ must be disabled when fiddling with the CCM registers and only enabled when waiting for voltage ramp as having them enables also causes spurious DVFS ints. Implement interruptible ISR pro/epilogue more safely (always using IRQ stack even in SVC mode handling). Fix an improper inequality in DVFS code (which set regs for down when going up and v.v.). Misc. support changes. Have internal tables take less RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25837 a1c6a512-1295-4272-9138-f99709370657
|
2010-05-06 03:23:51 +00:00 |
|
Michael Sevakis
|
931e06de64
|
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25800 a1c6a512-1295-4272-9138-f99709370657
|
2010-05-04 10:07:53 +00:00 |
|
Michael Sevakis
|
11cca264ff
|
i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25699 a1c6a512-1295-4272-9138-f99709370657
|
2010-04-23 15:32:50 +00:00 |
|