Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
29990 commits 17 branches 142 tags 291 MiB
Commit graph

23 commits

Author SHA1 Message Date
Michael Sevakis
5a8da163c8 i.MX31 - Dethreading operations continue 
Dispense with "pmic" thread and process PMIC events directly within ISR. Add
sense bit reading as part of the handling.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31528 a1c6a512-1295-4272-9138-f99709370657
 2012-01-02 18:32:35 +00:00
Michael Sevakis
2403f38c1f RDS: Use a define that doesn't imply any particular hardware dependency. 
Theoretically, anything with the capability could implement the decoding
action in an ISR on any radio chip supporting RDS.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31464 a1c6a512-1295-4272-9138-f99709370657
 2011-12-29 14:55:49 +00:00
Michael Sevakis
7b596416bf Gigabeat S: Update RDS processing to use asynchronous I2C rather than thread. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31462 a1c6a512-1295-4272-9138-f99709370657
 2011-12-29 12:02:49 +00:00
Bertrik Sikken
8c19dcd598 FS#12370: Initial RDS support for Si4701/Si4703 tuner (beast and clip zip) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31346 a1c6a512-1295-4272-9138-f99709370657
 2011-12-17 20:24:19 +00:00
Rafaël Carré
c6b9d3dcc9 There's not much to be shared between gigabeatf and gigabeats lcd code 
Give the gigabeats a new lcd type

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31290 a1c6a512-1295-4272-9138-f99709370657
 2011-12-15 20:16:05 +00:00
Michael Giacomelli
e8c79d65e1 The gigabeat S needs special casing so that you can still hold vol down to access its firmware partition. Additionally, the same logic should apply to firewire on the iPods. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29890 a1c6a512-1295-4272-9138-f99709370657
 2011-05-16 21:10:31 +00:00
Nils Wallménius
3b8f93af0a Enable AB repeat for the Gigabeat S, this will break lang string/voice clip order for this target so update your voice file. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29092 a1c6a512-1295-4272-9138-f99709370657
 2011-01-19 14:34:31 +00:00
Michael Sevakis
3a1127785b Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29053 a1c6a512-1295-4272-9138-f99709370657
 2011-01-15 08:19:30 +00:00
Michael Sevakis
89a7a8138e Gigabeat S: Make it a removable mass-storage device. Windows will assign a drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28972 a1c6a512-1295-4272-9138-f99709370657
 2011-01-05 19:35:51 +00:00
Torne Wuff
991e92fd3d New USB charging system, part 1 - API rework and user-visible setting update 
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.

2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.

3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.

4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.

No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
 2010-06-05 10:05:27 +00:00
Michael Sevakis
54c649697b Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26154 a1c6a512-1295-4272-9138-f99709370657
 2010-05-18 23:50:00 +00:00
Michael Sevakis
9eed2f71cc Gigabeat S: Not defining HAVE_POWEROFF_WHILE_CHARGING is far too disruptive given that it's not obligatory for the hardware to avoid poweroff while plugged/charging. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26068 a1c6a512-1295-4272-9138-f99709370657
 2010-05-15 21:32:05 +00:00
Michael Sevakis
80d0d15ca9 Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26051 a1c6a512-1295-4272-9138-f99709370657
 2010-05-15 13:09:45 +00:00
Nils Wallménius
92a6081531 Disable shutting down with the charger connected on the gigabeat s since it doesn't charge while powered off. Ideally we should implement a mode where it charges untill the battery is full and then powers off. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26012 a1c6a512-1295-4272-9138-f99709370657
 2010-05-14 08:52:54 +00:00
Michael Sevakis
4d04132c76 PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25970 a1c6a512-1295-4272-9138-f99709370657
 2010-05-12 14:05:36 +00:00
Michael Sevakis
931e06de64 i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25800 a1c6a512-1295-4272-9138-f99709370657
 2010-05-04 10:07:53 +00:00
Michael Sevakis
11cca264ff i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25699 a1c6a512-1295-4272-9138-f99709370657
 2010-04-23 15:32:50 +00:00
Torne Wuff
d48d3d467d Enable SW tone control on gigabeat S, since HW tone controls for its DAC are not implemented yet 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25641 a1c6a512-1295-4272-9138-f99709370657
 2010-04-13 21:47:09 +00:00
Torne Wuff
bad4142ce2 Add LBA48 support to all targets with ATA, except archoses whose USB bridge chip can't handle it. 
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
 2010-04-09 12:10:17 +00:00
Michael Sevakis
86545174b9 Gigabeat S: A little more housekeeping. Move source clock frequencies to config. header and name them per ref. manual designations. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25549 a1c6a512-1295-4272-9138-f99709370657
 2010-04-09 03:24:17 +00:00
Jeffrey Goode
ce6ec7fef8 Switch on hotkey on several targets. Stole the WPS Show Track Info key for most of them. Made up a free key for the rest. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25433 a1c6a512-1295-4272-9138-f99709370657
 2010-04-02 01:24:24 +00:00
Jeffrey Goode
d5e6bc7a8c FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work before they can be switched on 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25414 a1c6a512-1295-4272-9138-f99709370657
 2010-04-01 03:14:44 +00:00
Björn Stenberg
c0740440ac Rename targets to be consistent in all places. (FS #10819). Take 2. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657
 2009-12-07 12:19:08 +00:00
Renamed from firmware/export/config-gigabeat-s.h (Browse further)