We had 3 different references to the same value. Rockbox always uses a blocksize of 512 bytes for SD and we were using SECTOR_SIZE, SD_BLOCK_SIZE, & card_info[drive].blocksize to use this value. Now the only reference being used is SD_BLOCK_SIZE.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23746 a1c6a512-1295-4272-9138-f99709370657
This commit corrects the display of diacritic characters, which exist in many
languages. Hopefully, it will make Rockbox much more usable for users of these
languages.
Diacritic information (which used to decide whether a given character is
diacritic or not) is taken from the Unicode Standard, Version 5.2.
This feature does not affect drawing performance much, as the diacritic
database is cached (simple MRU mechanism).
There may be room for further performance, footprint, and
code-reuse wise improvements, that could be worked on in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23742 a1c6a512-1295-4272-9138-f99709370657
Patch by Boris Gjenero (dreamlayers). Writes are retried on failure now so this should be safe.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23741 a1c6a512-1295-4272-9138-f99709370657
Writes will now be retried if they fail, and will be done using multisector transfers which should be faster.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23740 a1c6a512-1295-4272-9138-f99709370657
Flyspray: FS#10371
Authors: Fred Bauer and myself
Only enabled on e200v2 and Fuze (crashes on clipv1)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23739 a1c6a512-1295-4272-9138-f99709370657
When read it returns all enabled interrupt sources
When written it enables interrupt sources for each bit set
So just like VIC_INT_EN_CLEAR, we don't have to read the previous value
before writing to it (VIC_INT_EN_CLEAR is write-only anyway)
Thanks to Fred Bauer for spotting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23734 a1c6a512-1295-4272-9138-f99709370657
We don't need to check the FIFO for MCI_RX_ACTIVE because we don't experience problems reading from the SD cards.
We need the MCI_TX_ACTIVE FIFO check during writes because some SD cards spend longer times in the PRG state
programming the data that has been written to them.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23733 a1c6a512-1295-4272-9138-f99709370657
We use wait_for_state() before any command that requires a state prior to being sent. Waiting after a transfer is not needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23732 a1c6a512-1295-4272-9138-f99709370657
of the CH_CONTROL and CH_CONFIGURATION registers easier to follow.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23725 a1c6a512-1295-4272-9138-f99709370657
The crc check on responses to sd commands was being bypassed due to a SD_APP_OP_COND special case. Now a short response is returned
even if the crc check fails so we can check the busy bit. The send_cmd() function still returns a false value but it loads the response
variable with the cmd response.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23718 a1c6a512-1295-4272-9138-f99709370657
OS X requires to unmount the player during bootloader installation on Sansas / Ipods. The system remounts the player automatically after a short while.
Not waiting for the system to remount the player will result in a changed mount point, making the small / full install write the main build to the wrong
location.
This currently waits up to 60 seconds for the player to get remounted until it errors out. This value seems to be sufficient, if it's not please report
so we can adjust it. Also, the waiting can't be interrupted right now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23716 a1c6a512-1295-4272-9138-f99709370657
- adjust the regex to figure the correct drive from the partition name.
- move the check for an old bootloader into the first installation step -- it's a fatal problem so it should appear as soon as possible.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23715 a1c6a512-1295-4272-9138-f99709370657
- when scanning for Ipods save the complete ipod_t structure on match. Only saving the disk name can result in the structure holding a disk name not matching the rest of the structure. This lead to wrong detection of macpod on OS X, as Mac drives might get detected later.
- reopen the Ipod in RW mode on scanning on W32 only. On OS X reopening also unmounts the player, which in turn makes resolving the mount point fail.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23707 a1c6a512-1295-4272-9138-f99709370657
