The "Save Current Playlist" isnt part of the playlist viewer settings. While
at this section also add a reference to the extra playlist chapter.
Change-Id: I68e494430dc00c6172859b0b8d9edbe5b0116741
Add a "volume limit" parameter to the configuration file. The maximum
value of volume setting in sound menu will be limited to the same as
volume limit. Also each time when setvol() is excuted, Rockbox will
check if the global_settings.volume value larger than
global_settings.volume_limit. If larger, take the value of volume_limit
instead. The volume_limit argument shares the same maximum and minimum values
with volume argument, while taking the maximum volume as its default value.
Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36
Reviewed-on: http://gerrit.rockbox.org/697
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
This is an improvement to the current compressor which I have added
to my own Sansa Fuze V2 build. I am submitting here in case others
find it interesting.
Features added to the existing compressor:
Attack, Look-ahead, Sidechain Filtering.
Exponential attack and release characteristic response.
Benefits from adding missing features:
Attack:
Preserve perceived "brightness" of tone by letting onset transients
come through at a higher level than the rest of the compressed program
material.
Look-ahead:
With Attack comes clipping on the leading several cycles of a transient
onset. With look-ahead function, this can be pre-emptively mitigated with
a slower gain change (less distortion). Look-ahead limiting is implemented
to prevent clipping while keeping gain change ramp to an interval near 3ms
instead of instant attack.
The existing compressor implementation distorts the leading edge of a
transient by causing instant gain change, resulting in log() distortion.
This sounds "woofy" to me.
Exponential Attack/Release:
eMore natural sounding. On attack, this is a true straight line of 10dB per
attack interval. Release is a little different, however, sounds natural as
an analog compressor.
Sidechain Filtering:
Mild high-pass filter reduces response to low frequency onsets. For example,
a hard kick drum is less likely to make the whole of the program material
appear to fade in and out. Combined with a moderate attack time, such a
transient will ride through with minimal audible artifact.
Overall these changes make dynamic music sound more "open", more natural. The
goal of a compressor is to make dyanamic music sound louder without necessarily
sounding as though it has been compressed. I believe these changes come closer to this goal.
Enjoy. If not, I am enjoying it
Change-Id: I664eace546c364b815b4dc9ed4a72849231a0eb2
Reviewed-on: http://gerrit.rockbox.org/626
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
New section Touchpad added to the manual. Gigabeatfx and
SansaFuze+ entries added for touchpad sensitivity setting.
Change-Id: I0c5a173d6ad479c4e6995cf5045d90da6cc216ab
Reviewed-on: http://gerrit.rockbox.org/689
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Last core update for keymaps and manual. Manual is now 100% complete
Change-Id: I9ad33206ecea41a88cba7a355da911fa7ab0455d
Reviewed-on: http://gerrit.rockbox.org/521
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) Now that recording is working a few keymaps update are required.
2) also implement the radio.c file so that fm dedicated keymaps
works.
3) implement some missing fm keymaps
4) manual updated accordingly
Change-Id: I40be3e245853ccb9ed7a5bc5a76fe4ed90772272
Reviewed-on: http://gerrit.rockbox.org/513
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
After the recent soft lock implementation for FM, this adds the
related information in the manual for Fuze+ and Clip/clip+ (basicaly it's a
copy/paste from WPS section).
Change-Id: I23c39d7b3763eb2b9897187baa3a9b2663003cf7
Reviewed-on: http://gerrit.rockbox.org/495
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
thanks to pixelma for having pointed this out and
correcting the first patch
Change-Id: I79f6264a5290906b0d7abd1703df79fde104cb4a
Reviewed-on: http://gerrit.rockbox.org/405
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
thanks to pixelma for having pointed this out
Change-Id: Iac8b997f42b8fb0f964f1f40ce1d2e7e286d4c04
Reviewed-on: http://gerrit.rockbox.org/404
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) slight keymaps update
Remove mapping of BUTTON_BACK reseting game to avoid pressing it
involuntary.
Direct mapping of BUTTON_POWER to go into menu.
2) manual updated
Change-Id: I28875104c4a4058216532b9aa12bb2defabcca6d
Reviewed-on: http://gerrit.rockbox.org/352
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Use %x9(id) to draw an image in the whole current viewport using the
9 segment drawer (which draws the corners as normal and *tiles*
the middle segments to the needed width/height).
Future work is to make it scale instead of tile
Change-Id: Ic3ed1cad93f96091694801eb442e0da5a2401203
Update %?pv description to better describe the
conditions it returns
Change-Id: I6be4d5293aa6816ae35d743b172fe324d7dc6d12
Reviewed-on: http://gerrit.rockbox.org/367
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Missing screenshots:
Invadrox, which I can't find in the menu, but on IRC they said it's
for LCD only, so it should be removed.
Pacbox, Rockboy and Zxbox: it's unclear where to find the ROMs.
Poor quality image:
manual/rockbox_interface/images/sansaclipzip-front.png. It can work,
but my “artistic” skills are not enough. Anyway, the information on
the picture is correct.
All the screenshots were taken using the default theme and the
simulator compiled for the Sansa Clip Zip.
Change-Id: I779a3b8fbf9a1ab2f12b8f8e6bcf55f2363900ce
Reviewed-on: http://gerrit.rockbox.org/357
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Alex Parker <rockbox@aeparker.com>
Tested-by: Alex Parker <rockbox@aeparker.com>
Makes FM radio keys consistent with the updated Clip keymap in the rest of rockbox. Home now goes to the main menu, power stops the radio, and several other keys are a little more obvious.
Change-Id: Iaab207acf936820d5602ae1ce4ffbbe30bf7877e
skin bars now automatically create the touch region the same size
as the bar on touchscreen targets. This means touches will
magically "just work" for reveresed bars (rtl or otherwise).
~5% padding is added on all 4 sides of the region rectangle but
this may need to be tweaked.
Please consider the 'progressbar' and 'volume' touchregion actions
to be deprecated.
Kudos to my new wife for figuring out the bleedingly obvious way to
do this!
Change-Id: I997a7bcaa70fce9885808aae27953c7676e9c2ff
Pipe the output of LaTeX through a Perl script and filter out information that
is irrelevant in deciding if building the manual actually worked. Format errors
in a similar way to gcc output to allow existing scripts catching it.
Enabling verbose output during the make run will not remove parts of the output
but only do some reflowing. The full log is always available in the manual
subfolder.
Change-Id: I15d35b4d3c73fafe2a4357168ca8ada51355f221
Reviewed-on: http://gerrit.rockbox.org/247
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Tested-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Commit bb24ac8c27 replaced the
\opt{iaudiom3,iriverh100} with \opt{remote} which isn't true in the
Iaudio M3 case as this feature is dependent on HAVE_REMOTE_LCD and
the M3 uses this screen as main lcd so doesn't define it. Use the manual
HAVEREMOTEKEYMAP for now as I didn't find a suitable other define yet.
Change-Id: I58b2abd2f7cae1a821cea297a2b4c002a3420493
Make this info available for all bitmap targets, also ones that only need it
in the pictureflow description. Shuffle some lines around so that it doesn't
need too many opts. Fixes FS#11350.
Change-Id: I5268483c7a1d765c8a994614442309b05de1d832
Create symlinks to the iaudiom3 graphics to not duplicate the picture itself
and to not lose the precise 'addressing' of the picture. Change the manual's
makefile to follow symlinks for this to work (thanks to Dominik and Jens for
the help there).
Change-Id: I5882880cb22cbf5561cb0872d7889b7c8c42b62e
- this patch add all general sections of the manual for the fuze+
- also correct some typos
Change-Id: Idd28675f48c0d01079d8fa01d68d3238ad2a54ce
Reviewed-on: http://gerrit.rockbox.org/116
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Where before there was a single sleep timer menu option which handled
initiating/ cancelling a sleep timer as well as setting the default duration,
now there is one menu option to either start or cancel a sleep timer and
another to set the default duration that will be used for future sleep timers.
Change-Id: Ibea3711ec6406845ff5d0c0568fe5d1739eb8deb
Reviewed-on: http://gerrit.rockbox.org/201
Reviewed-by: Nick Peskett <rockbox@peskett.co.uk>
Adds an option under settings > general settings > system to allow
the user to have the shortcuts menu displayed instead of the
quick screen. (option is "shortcuts instead of quickscreen" in the .cfg)
Change-Id: Id679b461c40ac617629422736d1509384364084d
Reviewed-on: http://gerrit.rockbox.org/199
Reviewed-by: Marek Salaba <marek.salaba@gmail.com>
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
When enabled, if the user has set "Start File Browser Here" (config.cfg:
start directory) to anything other than root and "Auto-Change Directory"
is set to "Yes" or "Random", the directory returned when an auto change
is required will be constrained to the value of "start directory" or below.
Change-Id: Iaab773868c4cab5a54f6ae67bdb22e84642a9e4b
Reviewed-on: http://gerrit.rockbox.org/182
Reviewed-by: Nick Peskett <rockbox@peskett.co.uk>
Tested-by: Nick Peskett <rockbox@peskett.co.uk>
%dr(x, y, width, height, [colour1[, colour2]]):
x,y - viewport relative pixel coordinates to start the rectangle.
width, height - obvious. can be '-' to fill the viewport
if both colours are left out the viewports foreground colour will be used
if one colour is specified it will fill the rectangle that colour.
if both colours are specified it will gradient fill the rectangle.
Change-Id: Iad451e99ded663bc7c5d182443659db7d909b388
- fuze+ keymaps for calculator updated
- manual updated accordingly
- also correct a little problem with a line only used by mpio hd300
manual but that appears on all other target's manual.
Change-Id: I9c4d3c21dc6174079edbde8035bad318e09ec74a
Reviewed-on: http://gerrit.rockbox.org/125
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Added missing %T actions and %cs states.
Change-Id: Id7ec897c84141ac3d604e23b41e1138bbadc5c77
Reviewed-on: http://gerrit.rockbox.org/180
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Add the following actions to %Tp:
createbookmark create a new bookmark from the wps
listbookmarks list bookmarks from the wps
trackinfo show track info from the wps
My main motivation was to allow bookmarking and jumping around audio books
from the wps on touch enabled targets. You can do it now through the context
menu but it requires 4 screen presses instead of 1.
Change-Id: I1fa1bf0064dfd22b897eca7c56acc1ce8956f14c
Reviewed-on: http://gerrit.rockbox.org/171
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
The bootloader doesn't boot into the Original Firmware anymore since a while.
Remove the claim that Rockbox will always boot the OF on USB, and add a note
about older builds not providing USB support.
Change-Id: I44f37eeb849b522a2024eb26cee064e848bc4d17
Commit 1c1e1c0 replaced one \newline with a \\ which means starting a complete
new table row instead of keeping the linebreak within a cell, so put it back.
Change-Id: I6962ff8fe2d1f18bd3d85398a7373b3df0634c50
This commit change:
1) replace all keymaps with PLA ones.
2) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
3) do the required change to the manual in order to match
code's changes.
4) add a missing key in the manual and show them in a table
Change-Id: Ie983c7673c9dec1a9daeb34f5edaaa3c8be7dd5e
Reviewed-on: http://gerrit.rockbox.org/129
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This commit changes:
1) replace all keymaps with PLA ones.
2) do the required changes to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
Change-Id: I0cea909dd2ff44b8c5a2daba11c192965c4a02c7
Reviewed-on: http://gerrit.rockbox.org/131
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This commit changes:
1) replace all keymaps with PLA ones.
2) do the required change to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
4) add the possibility to change values repeatily by holding key
pressed.
Change-Id: Ie68fd4e94830bba8a592941ee4e8b10aeacda923
Reviewed-on: http://gerrit.rockbox.org/127
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
this commit changes:
1) replace all keymaps with PLA ones.
2) do the required change to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
Change-Id: I8a064b98c118e369f8464de5e43c7641d8a08e9e
Reviewed-on: http://gerrit.rockbox.org/130
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
The very vast majority doesn't have an underscore. There are a few
exceptions but there shouldn't be introduced even more.
Change-Id: I18d9bf86b5588f8a22a7a96d2dbea61fde4aba61
%x and %xl only require the id and filename now.
If you leave off the x,y it will default to 0,0.
If you want to use the default x,y you can still put in the
num_subimages param on the end (e.g %xl(a, file, 3) )
Change-Id: I8eff793dfdd037e302ace8deec9dc16dcea264a7
The framebuffer the lcd driver uses can now be changed on the fly
which means that regular lcd_* drawing functions can draw onto the
"backdrop" buffer. The skin engine can use this to create layered
effects.
Add the tag %VB to a viewport to draw that viewport onto the
backdrop layer. If you want to draw an image onto the backdrop
framebuffer use %x(backdrop filename) instead of %X() inside
a viewport with %VB.
Change-Id: I741498e2af6d4f2d78932cabe8942317893e7cfc
To change the shown menu items add the line "root_menu_order:<items>" into your config.cfg
<items> can be any of:
bookmarks, files, database, wps, settings, recording, radio, playlists, plugins, system_menu, shortcuts
Manual entry by Alexander Levin
Change-Id: Ie7f4bfb0f795184de094d05fc341a6cedd1c0cde
Reviewed-on: http://gerrit.rockbox.org/104
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
1) this patch replace all keymaps with PLA ones.
2) the patch also do the required change to the manual in order to match
code's changes.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL)
4) Also cut out the remote control related mapping as PLA handle remote controls
his own way so that we don't need them anymore
5) change scrollwheel mapping in order to have it controlling the value of selected field unstead of field selection
Change-Id: I023122d45a8337fad1e8ed8be12d4c928bdd1292
Reviewed-on: http://gerrit.rockbox.org/106
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
- plugins games keymaps added to the manual
- merge some lines (see chessbox)
Change-Id: Iad97e6d07ae0419f54c26697f157ede3d07bd349
Reviewed-on: http://gerrit.rockbox.org/119
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Following a discution on irc we agreed on that:
- \ButtonPlayPause becomes \ButtonPlay for consistency
- It appeas in the manual as Play unstead of Play/Pause
- updated manual images accordingly
The patch was tested: manual still compile and display keymaps correctly
Change-Id: I04bd3c2bfee1c6c40ab66df9bf33f09f4ed47661
Reviewed-on: http://gerrit.rockbox.org/118
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA
2) the patch also made required change to the manual in order to match code's
change.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL)
TO TEST:
I'm not sure if remote control works anymore and cannot test it. I'm not
sure about the way PLA handle those so if that doesn't work let me know ;)
Change-Id: I3fb81e75ef6e4d49e19be24f09c0413599ed0c9c
Reviewed-on: http://gerrit.rockbox.org/90
Tested-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
1) Multitouch does not work on Fuze+. Unstead we can take advantage of
bottomleft and bottomright button.
2) Manual completed accordingly
Change-Id: I9535865773a2d1e21b1a71af63e4d377abcbc752
Reviewed-on: http://gerrit.rockbox.org/115
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA.
2) the patch also made required change to the manual in order to match code's
change.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL).
Change-Id: If6e78711eaab1dd2c907b418ba72c8789ceaa72b
Reviewed-on: http://gerrit.rockbox.org/105
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
1) On all non PLA plugin, power button is used for exit. For consistency,
we set PLA_EXIT to power button.
2) Manual updated accordingly
Change-Id: Ia4b8fce13bad2f8dc0710cdb29ccf6c74b3fd9c4
Reviewed-on: http://gerrit.rockbox.org/91
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA
2) the patch also made required change to the manual in order to match code's
change.
Change-Id: I54ec953f79a419a6bb2f78877ca8b82f572fb510
Reviewed-on: http://gerrit.rockbox.org/86
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Use these tags to stop having multiple conditionals.. e.g:
OLD: %?C<%?Ia<something>>
NEW: %?and(%C, %Ia)<something>
Change-Id: Ia3bbe4611cf808e87dcd1b1147181461fa08294a
As done with the screenshots display an error notice when the main image is
missing. Same is done for the remote image for targets that do have a remote.
\IfFileExists requires to use the full filename, not the stem as
\includegraphics accepts happily, so 36489d9 actually broke the main image for
all players.
