With this you can upload and run code on DSP core in atj213x.
The files can be produced using as2181. You can download
this assembler from https://github.com/wodz/as2181
You should use extended mode (-x switch) since DSP core
in atj is non standard and uses 24bit operands.
PX register has different meaning as well and is used as MSB
when loading other registers with immediates (immediate field
is 16bit in instruction so to set register to 24bit value
you need to store MSB in PX prior to this).
MAC MR is 56bit accordingly.
HIP interface seems to be mapped at standard addresses
(except that regular 218x doesn't have HIP).
Have a fun!
Change-Id: I9a80ca0dd3718ba8435ae8579bfffa66e067e022
This uses slightly hacked luaprompt to provide all the goodis.
See https://github.com/dpapavas/luaprompt for original.
Change-Id: Iedddb79abae5809299322bc215722dd928c35cca
The current code assumed that READ/WRITE would produce atomic read/writes for
8/16/32-bit words, which in turned put assumption on the memcpy function.
Since some memcpy implementation do not always guarantee such strong assumption,
introduce two new operation READ/WRITE_ATOMIC which provide the necessary
tools to do correct read and write to register in a single memory access.
Change-Id: I37451bd5057bb0dcaf5a800d8aef8791c792a090
- drop support for PP500x: it's very different from other PP and although
it would be possible to support them, I don't have one to test the code
- make sure only the CPU is started
- add PP descriptor to report chip ID and revision
- add code in shell and lua to support pp (no register description yet)
- compile for ARMv4 because PP502x is an ARM7TDMI
Change-Id: I36c4e465dfc2cfdfe7433b2f65cc8f6f0720fe62
It is very similar to how e200tool from MrH works but uses the framework
of hwstub which is makes it completely trivial since we already have the
USB driver written.
Change-Id: I61cdc245d3f828c2682bcd6ecfed5a1cc0094139
A SoC descriptor is not a small object: it can be as large as ~100KiB so
it's better to avoid copying things over.
Change-Id: I1ef862e1260299cdaa0c4d2822ac45968713498a
In might be useful to load hwstub in an environment with the MMU active,
in which case care must be taken on the order in which things are done.
Mostly, one should not disable the MMU before moving stuff around. The code
assumes the linking address (0 currently) is identity mapped.
Change-Id: I8d54ce9e8cadcde2e08990353ca7a46803731ca7
The protocol has evolved a lot during the 2.x.y lifetime, bringing more
features which later got unused. This commit removes all the unused stuff
and simplifies everything:
- drop the feature mask: everything is mandatory or stalled on error
- remove the info request and put all static information in standard USB
descriptors which are part of the configuration descriptor (and can be
retrieved using the standard GetDescriptor request).
- remove the USB interface, we had only one anyway
- remove all endpoint descriptors
- remove the exit/atexit stuff, it never worked as intended anyway
- update the hwstub library and make it able to handle any device
- update the tools (mostly renaming and removing of code)
Change-Id: I1872bba7f4177fc3891180e8f944aab88f5bde31
Some targets like Sony NWZ use a watchdog, so we must disable it to prevent
spurious reboot when we take over
Change-Id: I138a8d7f9a1b089acb2d08d7f6c4a58e8b088b3a
Conditional no longer needed since ctr0.S is private to target, also setup
stack just before jumping to C code only
Change-Id: I74116239be9e87bbe53e8fa814c45f04f242f1c1
