Commit graph

17 commits

Author SHA1 Message Date
Marc Guay
f6cde72ce9 Fix a few dead references in the manual and add an 's' where one was missing.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17972 a1c6a512-1295-4272-9138-f99709370657
2008-07-06 21:32:59 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00
Marc Guay
b93667b306 Add the Sansa c100 as a build target with basic drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
Dave Chapman
f2042983f0 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
Rob Purchase
18b004b330 Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17257 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 13:30:11 +00:00
Rob Purchase
f4deea6027 D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
2008-04-08 08:01:18 +00:00
Rob Purchase
3b46671a40 Make the Telechips bootloader slightly less messy, kill some warnings and allow entry to the bootloader debug screen via the D2's hold switch.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16879 a1c6a512-1295-4272-9138-f99709370657
2008-03-29 17:26:16 +00:00
Rob Purchase
4dc2d8ddba Enable tick IRQs on TCC780x. The main menu is now working on the D2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
2008-03-22 19:41:51 +00:00
Rob Purchase
c8836112c6 Cowon D2: Make the bootloader functional (usage instructions to appear on the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16646 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:57:19 +00:00
Rob Purchase
562b9de7cb D2: Make lcd_init_device() actually turn on the LCD, in preparation for booting the main image. Previously this required an explicit lcd_enable(true).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16523 a1c6a512-1295-4272-9138-f99709370657
2008-03-05 00:21:56 +00:00
Christian Gmeiner
868fcce96c Shutdown needs about 2 seconds, but it seems to work :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-16 12:44:15 +00:00
Rob Purchase
addb5228ec D2: Further work-in-progress on the NAND driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
2008-02-13 23:50:44 +00:00
Rob Purchase
5991478628 Read ID codes & raw page data from D2 NAND flash (work in progress;
no logical->physical address translation yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-25 21:37:59 +00:00
Rob Purchase
47ea030e2e Initial Cowon D2 commit:
* bootloader test program (basic LCD & button drivers, reads touchscreen)
* work-in-progress stubs for main build


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 18:49:53 +00:00
Dave Chapman
a4d48d0c0d Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-11-01 23:38:57 +00:00
Dave Chapman
28f6ae49ec Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00