Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
24457 commits 17 branches 142 tags 291 MiB
Commit graph

26 commits

Author SHA1 Message Date
Michael Sevakis
21f0c9a282 Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19971 a1c6a512-1295-4272-9138-f99709370657
 2009-02-11 12:55:51 +00:00
Michael Sevakis
4d3a020f27 Gigabeat S: Move the LCD framebuffer address so that DRAM can be mapped flat between physical and virtual addresses. NO BOOTLOADER UPDATE SHOULD BE NEEDED. The firmware image now handles low-level system setup as well. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19935 a1c6a512-1295-4272-9138-f99709370657
 2009-02-07 10:09:13 +00:00
Michael Sevakis
47509fafa4 Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19798 a1c6a512-1295-4272-9138-f99709370657
 2009-01-19 14:06:47 +00:00
Michael Sevakis
616c98b38f USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19797 a1c6a512-1295-4272-9138-f99709370657
 2009-01-19 13:41:25 +00:00
Björn Stenberg
b69be10d98 Use BOOTDIR and BOOTFILE defines instead of hardcoded path and file. FS#9559 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19190 a1c6a512-1295-4272-9138-f99709370657
 2008-11-23 22:07:48 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*. 
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
 2008-11-01 16:14:28 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Michael Sevakis
80278e45aa Bring Gigabeat S bootloader one step close to a release version. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17442 a1c6a512-1295-4272-9138-f99709370657
 2008-05-10 18:00:11 +00:00
Michael Sevakis
c41cacaf30 Do some gigabeat S bootloader cleanup (includes, const, static-ing, number of variables, etc.). Make sure a tar file isn't too big before loading it however unlikely that is. No overall functional change but bump to v.00000013 for tracking purposes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17403 a1c6a512-1295-4272-9138-f99709370657
 2008-05-07 07:14:39 +00:00
Michael Sevakis
0218397cf4 Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17381 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 13:30:29 +00:00
Michael Sevakis
75fe8875bc Fix firmware load error display and handling in Gigabeat S bootloader. Remove "Hello World". v.00000011 now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17347 a1c6a512-1295-4272-9138-f99709370657
 2008-05-04 03:44:49 +00:00
Jens Arnold
2bbacf89fe Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
 2008-04-29 06:19:32 +00:00
Michael Sevakis
8ec1dca0da Enable program flow prediction in the system control coprocessor setup in the bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17211 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 21:45:58 +00:00
Michael Sevakis
2920359cca Unreverse Gigabeat S bootloader. Boot Rockbox with hold switch off. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17203 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 04:34:39 +00:00
Michael Sevakis
9003dbe5b2 Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17181 a1c6a512-1295-4272-9138-f99709370657
 2008-04-20 03:30:57 +00:00
Michael Sevakis
94f7d0f290 UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
 2008-04-18 16:42:50 +00:00
Nicolas Pennequin
90a3d58013 Gigabeat S bootloader: Improve untarring by reading the whole file to memory before starting to write the output files. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17136 a1c6a512-1295-4272-9138-f99709370657
 2008-04-16 00:38:06 +00:00
Nicolas Pennequin
620e6b4d93 Gigabeat S bootloader: make it move a rockbox binary back to /.rockbox/ when it finds one in the MTP directory. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17133 a1c6a512-1295-4272-9138-f99709370657
 2008-04-15 23:17:03 +00:00
Michael Sevakis
ec05b66b5d That was stupid. Should be enable_interrupt. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16898 a1c6a512-1295-4272-9138-f99709370657
 2008-03-31 06:05:16 +00:00
Michael Sevakis
75f2d441e9 Change the remaining set_interrupt_status usage to the more parsimonious disable/enable/restore. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16897 a1c6a512-1295-4272-9138-f99709370657
 2008-03-31 06:00:23 +00:00
Nicolas Pennequin
e2f5f21e5b Give the Gigabeat S bootloader the ability to untar a tarball. 
To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary.
This is a temporary hack to make testing possible until we have a better way of sending a complete build.
Also enable writing to the disk by disabling the optimised write stubs.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657
 2008-02-17 23:17:08 +00:00
Michael Sevakis
a07c034de7 Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
 2008-02-08 02:20:05 +00:00
Michael Sevakis
1f021af60c Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
 2008-02-05 04:43:19 +00:00
Will Robertson
32f6109fb1 Gigabeat S memory management stuff. 
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file.
* DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
 2007-12-23 12:19:40 +00:00
Nicolas Pennequin
c2ca8c710c * Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though. 
* Make the main binary compile.
To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657
 2007-11-27 15:40:29 +00:00
Will Robertson
590501cfe4 Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
 2007-09-21 15:51:53 +00:00