Rocker is configured with CST (China Standard Time) timezone
which is UTC+8. Time in RTC is stored in UTC.
Change-Id: Ib9c03e0f0a1d3ea3a69f238cb083809ea9386e2a
Add define in config file to enable RTC support in rockbox,
Fix time_menu.c to include radio.h only when tuner is present
Implement time setting function on linux (was empty stub)
Not tested.
Change-Id: I40e6c4a6c1b66ada9cf4e698e502e221d0fc44df
Actual / of underlying linux OS should not be available to user.
I am still not sure if implementation is correct. It doesn't
perform any relative path sandboxing for example.
Change-Id: Ic577a10f3947f6e950e2c4d03173f9f207395eb7
Lcd_update rect was hanging during horizontal screen update x = 238 and width = 2
which was within the bounds of the screen, this seems to be a weird corner case
but more testing needs done.
Update_rect now properly bounded between 0 - screen w/h
--Cleaned up code
Pixels in x are now multiples of 4.
Datasheet states:
-------------------------------------------------------------------------------------------
WORD_LENGTH=0 implies the input frame buffer is RGB 16 bits per pixel.
DATA_FORMAT_16_BIT field indicates if the pixels are in RGB 555 or RGB 565 format.
Limitations:
— BYTE_PACKING_FORMAT [3:0] should be 0x3 or 0xC if there is only one pixel per word.
— If there are two pixels per word, BYTE_PACKING_FORMAT [3:0] should be 0xF and
H_COUNT will be restricted to be a multiple of 2 pixels.
and
WORD_LENGTH=3 indicates that the input frame-buffer is RGB 24 bits per pixel (RGB 888). If
BYTE_PACKING_FORMAT [3:0] is 0x7, it indicates that there is only one pixel per 32-bit word
and there is no restriction on H_COUNT.
Limitations:
— If BYTE_PACKING_FORMAT [3:0] is 0xF, it indicates that the pixels are packed, i.e. there
are 4 pixels in 3 words or 12 bytes. In that case, H_COUNT must be a multiple of 4 pixels.
-------------------------------------------------------------------------------------------
We are using 16 bits per pixel and byte_packing = 0xF but device crashes with multiple of 2 pixels
Behaviour can be verified with plugin - oscilloscope, Horizontal mode device hangs as indicator
reaches right of screen
Change-Id: I1445f5334f4e7fe59304c65c76b47d0daa0614b2
Windows now ignores the hidden flag, so just nullify the entries
to hide depending upon whether or not bootloader install mode is
activated.
Change-Id: I00d0797e40ea3b5f5d5d8e1243b50cfcdd029bb4
Instead of checking ticks, set a sticky dirty flag that indicates
that the RTC needs to be read. This gives a timely update and more
accurate readout without actually reading the RTC until it changes.
The implementation should atomically read the flag and clear it.
Setting the flag would typically happen in an RTC tick ISR.
Change-Id: I6fd325f22845029a485c502c884812d3676026ea
New support as well as some buggy support fixed.
Still no floating point support if ever that would be desired.
Support (*):
* Flags: '-', '+', ' ', '#', '0'
* Width and precision: 'n', '.n', '*' and '.*'
* Length modifiers: 'hh', 'h', 'j', 'l', 'll', 't', 'z'
* Radix: 'c', 'd', 'i', 'n', 'o', 'p/P', 's', 'u', 'x/X'
(*) Provision exists to switch lesser-used stuff on or off or when
certain functionality isn't desired (bootloader?). The compulsory
radixes are everything but 'o', 'n', 'p/P' and 'x/X' with length
modifiers being optional. The default setup is 'l', 'z', 'c', 'd',
'p/P', 's', 'u', 'x/X'.
* Move fdprintf() to its own file. It was in a strange place.
* Make callers compatible and fix a couple snprintf() bugs while
at it.
Could smush it down in size but I'm gonna get over the binsize
neurosis and just the let optimizer do its thing.
Change-Id: Ibdc613a9b6775802c188b29b9dd46c568c94f7c3
At normal loads:
- disabling auto slow boosts performance at the cost of runtime (~ -5%)
- disabling at max cpu does not noticibly decrease runtime
Change-Id: I5de80201c9a24ce556862151cbd6b21b01708b63
None of the Sony up to A15 seem to support RDS (they use either Si4702 or Si4708),
thus I did not add any code to support RDS.
Change-Id: I64838993b9705b36b94665f8470c7a89c772c961
Adds boot data to as3525 devices Sansa C200v2 E200v2 Clip Clipv2 Clip+ ClipZip
fuze, fuzev2 m200v4
Adds boot_data to features.txt
default arm crt0.s now had boot data if HAVE_BOOTDATA is defined
Change-Id: I614a556696540511a69fc12a4520b01c268bf8a9
Bootdata is a special location in the Firmware marked by a magic header
The bootloader is able to copy information to the firmware by locating
this struct and passing data to the firmware when it is loaded but
before it is actually executed
Data is verified by a crc of the bootdata
Change-Id: Ib3d78cc0c3a9d47d6fe73be4747a11b7ad6f0a9e
Playing AAC-HE files resulted in a race condition between
audio/codec/buffering for set_cpu_frequency
Change-Id: I35e1c1fd18db623e2990c305acdca03f57184d0d
* Editing a bunch of drivers' thread routines in order to
implement a new feature is tedious.
* No matter the number of storage drivers, they share one thread.
No extra threads needed for CONFIG_STORAGE_MULTI.
* Each has an event callback called by the storage thread.
* A default callback is provided to fake sleeping in order to
trigger idle callbacks. It could also do other default processing.
Changes to it will be part of driver code without editing each
one.
* Drivers may sleep and wake as they please as long as they give
a low pulse on their storage bit to ask to go into sleep mode.
Idle callback is called on its behalf and driver immediately put
into sleep mode.
* Drivers may indicate they are to continue receiving events in
USB mode, otherwise they receve nothing until disconnect (they
do receive SYS_USB_DISCONNECTED no matter what).
* Rework a few things to keep the callback implementation sane
and maintainable. ata.c was dreadful with all those bools; make
it a state machine and easier to follow. Remove last_user_activity;
it has no purpose that isn't served by keeping the disk active
through last_disk_activity instead.
* Even-out stack sizes partly because of a lack of a decent place
to define them by driver or SoC or whatever; it doesn't seem too
critical to do that anyway. Many are simply too large while at
least one isn't really adequate. They may be individually
overridden if necessary (figure out where). The thread uses the
greatest size demanded. Newer file code is much more frugal with
stack space. I barely see use crack 50% after idle callbacks
(usually mid-40s). Card insert/eject doesn't demand much.
* No forcing of idle callbacks. If it isn't necessary for one or
more non-disk storage types, it really isn't any more necessary for
disk storage. Besides, it makes the whole thing easier to implement.
Change-Id: Id30c284d82a8af66e47f2cfe104c52cbd8aa7215
We don't really know what those are supposed to do. They seem to change the
volume curve but it is not very clear what is the intended purpose.
Change-Id: I65f5d18aba139844c23df092277ba17ee8518f96
sonynwz: quirk for cpufreq broken driver
There was some redundancy between frequency_linux(cpu, true) and
current_scaling_frequency(), also I see no reason to compile the cpuinfo stuff
unconditionally and the scaling info only on DX since it was already printed
some partial scaling info anyway. Thus compile all the code unconditionally
and simplify the logic in the debug menu. Also avoid putting buffers of size
PATH_MAX on stack since it can be quite big and we only requires 64 bytes
for those paths.
On Sony NWZ, the cpu driver reports frequency in MHz instead of kHz thus we need
to make the cpuinfo code aware of that bug.
Change-Id: I61af45ab5f179ecc909b4841b9137a915a60193a
We still miss the model IDS for those device so scsitool won't be able to
recognize them automatically.
Change-Id: I17ae0f0d95c011cea8e289def63c7673b6c4b667
Always compile in pcm_alsa_set_digital_volume, the linker will optimize it
away on targets that don't use it.
Change-Id: Ia21c3eaa8a64b75761ab5d056361e7ed1fcf949a
Due to some undocumented behavior, the touchscreen was almost unusable in point
mode. Now it's much better but still not very nice to use, probably it needs some
filtering.
Change-Id: Idc8a0214b09f268e6be907ee6ec3126cc0d88773
This requires a few changes unrelated to the A860 because configure unsets
APPLICATION but the NWZ is an application!
Change-Id: Id91aa23193383ac95886b281653da5286edd9caf
SUPPORTED SERIES:
- NWZ-E450
- NWZ-E460
- NWZ-E470
- NWZ-E580
- NWZ-A10
NOTES:
- bootloader makefile convert an extra font to be installed alongside the bootloader
since sysfont is way too small
- the toolsicon bitmap comes from the Oxygen iconset
- touchscreen driver is untested
TODO:
- implement audio routing driver (pcm is handled by pcm-alsa)
- fix playback: it crashes on illegal instruction in DEBUG builds
- find out why the browser starts at / instead of /contents
- implement radio support
- implement return to OF for usb handling
- calibrate battery curve (NB: of can report a battery level on a 0-5 scale but
probabl don't want to use that ?)
- implement simulator build (we need a nice image of the player)
- figure out if we can detect jack removal
POTENTIAL TODOS:
- try to build a usb serial gadget and gdbserver
Change-Id: Ic77d71e0651355d47cc4e423a40fb64a60c69a80
The ZEN/X-Fi (STMP3700) don't handle memory frequency scaling really well, for
this reason we run it at a fixed frequency. That frequency was previously set
to 64Mhz because when the CPU run at its lowest frequency, we set the VDD voltage
to 0.975 V and on STMP3700, VDDD=VDDDMEM and this is too low to run EMI at 130Mhz.
This is not a good solution because under heavy load, running the EMI at 64Mhz
results in frame drops and a sluggish device. Thus we now run the EMI at 130Mhz
all the time now. To do so, increase the minimum VDD voltage to 1.275 V.
This may result is a decreased battery life on those targets but it will also
avoid all sorts of glictches and all the device to truly run at full speed.
Change-Id: Ia8391492c29fe67bc2701aa7d8cfd00a9df349e8
