* DMA Bulk IN (ie our TX) results in sequential transfers 33-68% faster.
* DMA Bulk OUT (ie RX) is mostly stripped out due to complete brokenness.
* Interrupt and control endpoints remain PIO-driven.
Other improvements:
1) Use consistent endpoint references (no magic numbers)
2) Greatly enhanced logging
3) DMA support can be compiled out completely
4) Setting lockswitch will disable all DMA operations at runtime
5) Much more robust error checking and recovery
Change-Id: I57b82e655e55ced0dfe289e379b0b61d8fe443b4
Fixes deficiencies with the button system on the X3
The x3 has an interesting button layout.
Multiple key presses are NOT supported unless
[BUTTON_POWER] is one of the combined keys
As you can imagine this causes problems as the power button takes
precedence in the button system and initiates a shutdown if the
key is held too long
instead of BUTTON_POWER use BUTTON_PWRALT in combination with other keys
IF using as a prerequsite button then BUTTON_POWER should be used
Multiple buttons are emulated by button_read_device but there are a few
caveats to be aware of:
Button Order Matters!
different keys have different priorities, higher priority keys 'overide'
the lower priority keys
VOLUP[7] VOLDN[6] PREV[5] NEXT[4] PLAY[3] OPTION[2] HOME[1]
There will be no true release or repeat events, the user can let off the
button pressed initially and it will still continue to appear to be
pressed as long as the second key is held
Tree scrolling is PLAY+NEXT or PLAY+PREV
Change-Id: I88dfee1c70a6a99659e8227f5becacc50cc43910
Group commands for a bit more speed
bitdelay was not being inlined
lower bitdelay to 12 cycles
Clean-up magic numbers
Change-Id: Ifeb57a5532807a598f1ec5e1c55f03e4aa1e133f
* Increase audio buffer size to better handle IRQ latency (256->2048)
* Ensure DMA engine is idle prior to starting transfers
* Set AIC to repeat last sample in case of underflows
Change-Id: I9c45c20481ee072e5882b7586fb7d50bd8ef2f35
- Avoid use of uname, instead ask the compiler about the binaries it
creates.
- Move platform specific commands used into functions.
- Replace use of echo with make functions.
Change-Id: I365f656e02ddb90ee91ae60fec1230b4aaaf224f
Based on code originally written by Amaury Pouly (g#1789, g#1791, g#1527)
but rebased and heavily updated.
Change-Id: Ic794abb5e8d89feb4b88fc3abe854270fb28db70
only check button values with adc when buttons are actually pressed
battery level check frequency is now around 30 seconds
switched to polling for the battery voltage w/ timeout
Ifdef functions Allow BACK OPTION PLAY to be the first of a two key combo
Change-Id: Icb48d62ac8d82b4dc931df5e1c5b4a84a9a69772
- Replace use of obsolete members with their replacements.
- Fix type issue that requires explicitly creating the right object now.
- Update project file to work with Qt5.
Change-Id: I3af2b1520796e977e58c0a01e165c77c469a23b9
Back off to 480MHz [max] clock, bus/mem clock of 120MHz.
576 is unstable on at least one unit, and 528 still glitches.
Change-Id: I020e48532524e739f3bfa42bed570381ccd34959
