Several of the problem samples on the tracker use values outside this
range. Trying the larger table doesn't quite seem to fix things, but
its only a small amount of additional memory and looking at ffmpeg,
I think the larger table is correct.
Change-Id: Id046e62b68550701aa1f80c9abd0a1dcd711bd0d
No known samples are fixed by this problem, but I haven't tested many.
Backport of ffmpeg revision 26388.
Change-Id: Ife9654b7477a432834e3cab2cb43d16da071445a
This is needed on app targets as e.g. ".section .icode" leads to the
code getting linked to incorrect locations (0x0 in this case).
Change-Id: Ic28c5ae6d4f8001d211d685b5ca92d5ffff0c7b2
Use memmove instead of memcpy for overlapping copy, fixes
crackling in sims and warble on my system. Native targets
seem to have been unaffected.
Change-Id: I265d4ce373e224581bd2f5ba15c75b473ec231f2
If the settings, like samplerate, were to go out of range where
timestretch drops out of processing and then go back to the same as
when they were valid, it would fail to switch back on by itelf.
Change-Id: Ic5bcb268540b0db8e0483117b8a5a0ce5c5a9db0
Makes quite a huge difference to get rid of 64-bit math in a hot
area. Cuts about 12 MHz. Generic routine generates good code on
ARM and asm cuts no instructions there.
Change-Id: I4ac647406006c42004f9f5ab396cbf4e85688854
Wrap up the the stereo case into loops and remove unused calculations
hanging out in tdspeed_update().
A wee little bit of code style and column policing.
Change-Id: I8dd3ab4b3e7e56b55dc00c00f3e32996228cc457
Also move the definition to config.h
Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Input functions have common setup sequences that can be placed
into an inline function instead of repeating it all repeatedly.
Change-Id: I9e62904ff0948651c64ddf160ed4400ed6dc81ff
It was only needed by the old arm toolchain that we no longer use or support.
Change-Id: Id0e6c67477f8834a637079b03cde5fbf9da68b1c
Reviewed-on: http://gerrit.rockbox.org/233
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Move code dealing with rockbox specific buflib allocations into a
rockbox specific file and implement buffer allocation with
malloc/free for warble/stand alone lib.
Based on patch by Sean Bartell.
Change-Id: I8cb85dad5890fbd34c1bb26abbb89c0b0f6b55cf
Reviewed-on: http://gerrit.rockbox.org/144
Tested-by: Nils Wallménius <nils@rockbox.org>
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Reviewed-by: Nils Wallménius <nils@rockbox.org>
This would zero the first 4 or 8 bytes of the array because it is declared as a pointer
rockbox/lib/rbcodec/codecs/libasap/asap.c:1229:44: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess]
memset(ast -> memory, 0, sizeof(ast -> memory));
~~~~~~~~~~~~~ ~~~~~~~^~~~~~
It's always used in MONO mode and doesn't need the IRAM sample/
resample buffers and 1280 bytes can be freed.
M5 can now have its PCM mixer downmix buffer in IRAM.
Change-Id: I0af08be5b212b7dfe382bba588a6585eb328a038
Use them to move tick counting, yielding and coldfire macsr handling
code to a rockbox specific file.
Change-Id: Id7417dc98c08a342eba45ba56b044a276e50564b
Reviewed-on: http://gerrit.rockbox.org/229
Tested-by: Nils Wallménius <nils@rockbox.org>
Reviewed-by: Nils Wallménius <nils@rockbox.org>
librbcodec users must provide these two files when the library is built.
rbcodecconfig.h provides configuration #defines and basic types, and
will be included by public librbcodec headers, so it must not conflict
with the user's code. rbcodecplatform.h provides various OS functions,
and will only be included by source files and private headers. This
system is intended to provide maximum flexibility for use on embedded
systems, where no operating system headers are included. Unix systems
can just copy rbcodecconfig-example.h and rbcodecplatform-unix.h with
minimal changes.
Change-Id: I350a2274d173da391fd1ca00c4202e9760d91def
Reviewed-on: http://gerrit.rockbox.org/143
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Tested-by: Nils Wallménius <nils@rockbox.org>
Moved to playback.c, since it doesn't use metadata from the music file.
Change-Id: I5c3ad7750d94b36754f64eb302f96ec163785cb9
Reviewed-on: http://gerrit.rockbox.org/142
Reviewed-by: Nils Wallménius <nils@rockbox.org>
The LSP feature in WMA requires that the noise table values be
doubled verses when it is not used. Unfortunately, the previous
code would double the same values every time a LSP file was
decoded without first resetting them to their original values.
Change the code to check if the values are already doubled, and
then double/halve them as needed. This is still a bit ugly,
in the future consider using the built in rockbox dither instead
of a lookup table.
Fixes playback when skipping back and forth between low and high
bitrate WMA.
Change-Id: I4c393092e4a789bc8f98d74274fe207400b9550e
Reviewed-on: http://gerrit.rockbox.org/226
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Tested-by: Michael Giacomelli <giac2000@hotmail.com>
Moves replaygain definitions to lib/rbcodec/dsp/dsp_misc.h.
Intermediate functions in misc.c handle any adjustment and calling
the rbcodec APIs.
Change-Id: I9f03561bca9aedd13760cf19c4e19aa3c68e7024
Reviewed-on: http://gerrit.rockbox.org/140
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Move a few functions to .text that probably don't see a huge benefit
from being .icode. Will scrutinize later.
Change-Id: I7bdffc326076c5cd7e6a1c57d25d31e653920327
Creates a standard buffer passing, local data passing and messaging
system for processing stages. Stages can be moved to their own source
files to reduce clutter and ease assimilation of new ones. dsp.c
becomes dsp_core.c which supports an engine and framework for effects.
Formats and change notifications are passed along with the buffer so
that they arrive at the correct time at each stage in the chain
regardless of the internal delays of a particular one.
Removes restrictions on the number of samples that can be processed at
a time and it pays attention to destination buffer size restrictions
without having to limit input count, which also allows pcmbuf to
remain fuller and safely set its own buffer limits as it sees fit.
There is no longer a need to query input/output counts given a certain
number of input samples; just give it the sizes of the source and
destination buffers.
Works in harmony with stages that are not deterministic in terms of
sample input/output ratio (like both resamplers but most notably
the timestretch). As a result it fixes quirks with timestretch hanging
up with certain settings and it now operates properly throughout its
full settings range.
Change-Id: Ib206ec78f6f6c79259c5af9009fe021d68be9734
Reviewed-on: http://gerrit.rockbox.org/200
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
This function has been changed to rbcodec_format_is_atomic, which
doesn't require an enum from the kernel.
Change-Id: I1d537605087fe130a9b545509d7b8a340806dbf2
Reviewed-on: http://gerrit.rockbox.org/141
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Tested-by: Nils Wallménius <nils@rockbox.org>
dsp_set_eq_coefs now has parameters for the band settings, so it doesn't
need to access global_settings.
Change-Id: I29ac19fc353b15a79cb25f0e45132aef0881e4c9
Reviewed-on: http://gerrit.rockbox.org/138
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Differences between signed samples cover the entire unsigned 32-bit
range. "abs" will think any difference exceeding INT32_MAX is negative
which is not corrent. Test which argument is greater and subtract the
lesser from it, outputting unsigned difference.
Change-Id: I73a8e5e418d49ff73d1a7c98eeb4731946dcfe84
The parser was unconditionally scanning things which it thought
were conditional/enum lists (or tag arg lists) when they couldn't
possibly be (i.e < inside a param which should be valid).
This change fixes it (i.e %?and(%if(%pv, <, -50), %if(%mp, >i, 1))
is perfectly valid now.
This *may* break your exsiting skins if you were using %if with < or >
Change-Id: Ia24dbdf0b11fc7d8a735c1111d648c3bebd68ac6
This reverts commit ec8b21eef8 which was pushed by accident.
Change-Id: I1aaedf6876d0448a100dc582b79f1293d021bac1
Reviewed-on: http://gerrit.rockbox.org/216
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The parser was unconditionally scanning things which it thought
were conditional/enum lists (or tag arg lists) when they couldn't
possibly be (i.e < inside a param which should be valid).
This change fixes it (i.e %?and(%if(%pv, <, -50), %if(%mp, > 1))
is perfectly valid now.
This *may* break your exsiting skins if you were using %if with < or >
Change-Id: Ibcb42bc6bb78908f79de024b61276b91b1ce02a0
Reviewed-on: http://gerrit.rockbox.org/214
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Implement functions to read from a memory location and indicate
failure in case this is not possible. Since we do not have a MMU,
intercept the data abort handler and simply return when the abort
comes from the safe read routines.
Change-Id: I08f2e59898dcac893319a8150d4cf626f3adabbd
Reviewed-on: http://gerrit.rockbox.org/207
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
__get_sp is missing a return! I don't know how it ever worked.
Use "bx lr" since it works in all cases (armp and thumb).
Change-Id: I26011db333a8a5f96276be83e18da7507c501c38
Reviewed-on: http://gerrit.rockbox.org/206
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
libs in $ROOT/lib now add to $(CORE_LIBS) and $(EXTRA_LIBS) and are
automatically linked by the core and codecs/plugins respectively.
Change-Id: Iff482c792a8c8142718f6a16a450c6e2f1497c9a
%dr(x, y, width, height, [colour1[, colour2]]):
x,y - viewport relative pixel coordinates to start the rectangle.
width, height - obvious. can be '-' to fill the viewport
if both colours are left out the viewports foreground colour will be used
if one colour is specified it will fill the rectangle that colour.
if both colours are specified it will gradient fill the rectangle.
Change-Id: Iad451e99ded663bc7c5d182443659db7d909b388
Warble uses Rockbox's codecs to play files with SDL or convert them to
WAV or raw formats. It also prints metadata and supports some of the DSP
effects. In the future, warble could be used to implement an automated
test suite for codecs, metadata, and DSP.
Change-Id: Ife1a63d2354496016277bfcbae4a9c23423ebd86
Reviewed-on: http://gerrit.rockbox.org/135
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Tested-by: Nils Wallménius <nils@rockbox.org>
cppcheck reported:
[lib/unwarminder/unwarm_thumb.c:399] -> [lib/unwarminder/unwarm_thumb.c:399]: (style) Same expression on both sides of '&&'.
Patch will also be sent to the upstream project.
Change-Id: I57033f290135f4dc09ac7e9b07c31461bc5b471a
Reviewed-on: http://gerrit.rockbox.org/157
Reviewed-by: Thomas Jarosch <tomj@simonv.com>
This call is cheap (except if the list config changes, but then it should
be called anyway), and do_refresh isn't always set appropriately, e.g.
when the screen has just changed, which could cause the list config to be
null at bad times, which caused the standard list to be shown instead of
the desired skinned list.
Change-Id: I47dd2552d6d1062456ede4529c4891e80a8159ea
Reviewed-on: http://gerrit.rockbox.org/113
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
%x and %xl only require the id and filename now.
If you leave off the x,y it will default to 0,0.
If you want to use the default x,y you can still put in the
num_subimages param on the end (e.g %xl(a, file, 3) )
Change-Id: I8eff793dfdd037e302ace8deec9dc16dcea264a7
Internally remove some hacks around how %x() is handled.
%x() inside the default viewport will no longer work if
other viewports are used, so if you are using viewports and
%x() make sure it is in a viewport!
Change-Id: I8ecab805d55fc0f8476ff0516cba38e23400aa20
The framebuffer the lcd driver uses can now be changed on the fly
which means that regular lcd_* drawing functions can draw onto the
"backdrop" buffer. The skin engine can use this to create layered
effects.
Add the tag %VB to a viewport to draw that viewport onto the
backdrop layer. If you want to draw an image onto the backdrop
framebuffer use %x(backdrop filename) instead of %X() inside
a viewport with %VB.
Change-Id: I741498e2af6d4f2d78932cabe8942317893e7cfc
This allows list items to be rendered differently depending on their
on-screen position, allowing things like gradients or nonlinear alignment
Change-Id: I1d9c080f97e83707f0e80f57abc762cb2b94f6ed
Simplified stack unwinder for ARM. This is port of
http://www.mcternan.me.uk/ArmStackUnwinding/
backtrace() is called from UIE() on native targets
and from panicf() on both native and ARM RaaA.
Change-Id: I8e4b3c02490dd60b30aa372fe842d193b8929ce0
%vs(label, touch, -) will reset the timeout for the variable without
changing the variables value.
Change-Id: Idba03f454a82ac7460bb53a4de3aa6903656c585
Use these tags to stop having multiple conditionals.. e.g:
OLD: %?C<%?Ia<something>>
NEW: %?and(%C, %Ia)<something>
Change-Id: Ia3bbe4611cf808e87dcd1b1147181461fa08294a
Core, codecs and plugins link it separately so this gets rid of SOURCES trickery.
Don't build it for hosted targets.
Change-Id: If15ef90e93cd218a4352ae8e89eea95d3122452f
Massive thanks to Michael Chicoine and other testers for finding the early bugs.
This removes all skin memory limitations
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30991 a1c6a512-1295-4272-9138-f99709370657
Since recent skin engine related commits images aren't stored on the skin
buffer anymore. The buffer was decreased accordingly. Now some themes used that
buffer more for tokens than images and are now broken.
To fix, increase the max token count, while optimizing the two most often
allocated structs for size (so no net ram usage increase).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30762 a1c6a512-1295-4272-9138-f99709370657
To use it enable DEBUG_SKIN_ALLOCATIONS in skin_buffer.h and pipe the rockboxui output to the script
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30597 a1c6a512-1295-4272-9138-f99709370657
%LT(offset, nowrap) - get the text for the "being drawn"+offset item (offset being + or -). if the second param is "nowrap" (Without quotes) the text will be blank if the item would need to wrap. Same for the icon
e.g:
%LT(-1)
%LT <<
%LT(1, nowrap)
will display:
Four
Five <<
Six (or nothing if Five is the last item)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30502 a1c6a512-1295-4272-9138-f99709370657
%ss(start, length, tag) - i.e %ss(0,1,%TL) will get the first letter of the current lines text.
use - for the length to get the rest of the tag (e.g %ss(1,-,%TL) will get everything after the first letter).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30500 a1c6a512-1295-4272-9138-f99709370657
due to lack of user feedback the actual tags may change, hopefully not though.
The way it works is the skin specifies a rectangle and a viewport label. For each item in the list that is being displayed all viewports with the specified label are drawn. However, instead of the viewport x/y position being offset from the top left corner like normal they are offset from the rectangle position in the list (so think of them as child-viewports of the rectangle which moves).
Normally the rectangle will move down the screen to show a normal list, this can be changed to move across the screen in a grid pattern.
The UI viewport is used to bound the items (i.e %Vi() )
Scrolling is completly disabled in all items except the currently selected item.
This works well in combination with the %cs tag to show differently styled lists based on the current screen :)
New tags:
%LT - Get the current items text
%LI - Get the current items icon number
%Lc - Use as a conditional to determine if the current item is the selected item
%LB - BAR TAG to show the scroll bar, params/options like other bar types. It still needs a bit of work though. Use as a conditional to find out if the bar is actually needed
%Lb(viewport, width, height [,tile]) - specify the viewport label to draw for each item and the size of each item. if the last param is 'tile' it will form a grid instead of a list
example.sbs:
%?cs<%Lb(a,100,20)|>
%V(0,0,10,-,1)%Vf(aabbcc)
%?LB<%LB(0,0,10,185, invert)>
%Vi(-,10,0,-,-35,1)
%Vl(a,5,5,160,12,1)
%s%?Lc<%Vg(00ffaa, ff0000, 000000)%Vs(gradient)%>%>%>%ac>zzzzzzz %LT zzzzz%s%?Lc<%ar%<%<%<>
%V(0,185,-,-,1)
%s%LT
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30461 a1c6a512-1295-4272-9138-f99709370657
%Vs(mode[, param]) : mode can be "invert", "color" (where param is the colour to use", "clear" to disable the current style, "gradient" where param is the number of lines the gradient should draw over.
%Vg(start colour, end colour, [text colour]), if this tag isnt used the list selection colours from the settings will set the gradient colours
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30302 a1c6a512-1295-4272-9138-f99709370657
%vs(name, [set|inc|dec], value [,max]) - name is the id, set sets the value, inc increments by value, dec decrements by value
%vg(name) - get the current value
%vl(name [,timeout]) - 'has it changed in [timeout]'?
values start at 1 and are all reset to 1 on skin load
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29655 a1c6a512-1295-4272-9138-f99709370657
The attempt to detect if building a fat library is necessary for libskin_parser
makes cross compiling fail on OS X. Allow overriding the target platform for
libskin_parser to fix that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29515 a1c6a512-1295-4272-9138-f99709370657
example: %T(0,0,20,12, setting_set, repeat, off)
That will set the repeat mode to "off" when it is pressed.
"setting_set" is the action name
"repeat" is the name of the setting in the config files
"off" is the value to set it to (same values as the legal values in the config files)
Not all settings are supported, outright unsupported settings will fail to parse. Some settings might not work too well if they don't apply instantly (Any that work well int he quickscreen should work well here)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29483 a1c6a512-1295-4272-9138-f99709370657
fix a bug which stopped the setting_inc/dec touch actions from parsing
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29477 a1c6a512-1295-4272-9138-f99709370657
%pL for the left channel, %pR for the right channel... usable as a value, conditional or bar (exactly the same as %pv/%bl/etc)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29043 a1c6a512-1295-4272-9138-f99709370657
As a conditional it scales its value to the number of options you give it (like volume)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28613 a1c6a512-1295-4272-9138-f99709370657
