Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
HAVE_SW_VOLUME_CONTROL is required and at this time only affects the
SDL targets using pcm-sdl.c.
Enables balance control in SDL targets, unless mono volume is in use.
Compiles software volume control as unbuffered when
PCM_SW_VOLUME_UNBUFFERED is defined. This avoids the overhead and
extra latency introduced by the double buffer when it is not needed.
Use this config when the target's PCM driver is buffered and sufficient
latency exists to perform safely the volume scaling.
Simulated targets that are double-buffered when made as native targets
remain so in the sim in order to run the same code.
Change-Id: Ifa77d2d3ae7376c65afecdfc785a084478cb5ffb
Reviewed-on: http://gerrit.rockbox.org/457
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
* SOUND_x enum can be generated by audiohw_settings.h along with settings
entries and sound_val2phys.
* VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If
you need them, they are for target-defined purposes.
* Fix up SDL volume implementation in sdl.c. Move sim volume calculation
code to pcm-sdl.c.
* Min trigger tresholds were based upon VOLUME_MIN for some reason.
These setting have nothing to do with playback volume. Since it is no
longer present, set these at -89dB which is the minimum peak meter
sensitivity setting.
* Fix an oversight in wm8758.c. I forgot to add the dB->register
conversion to audiohw_set_volume.
Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75
Onda VX747 sim was missing a limits #define; #include limits.h in
pcm_sw_volume.h.
Simply use the software volume control for the SIM volume control
rather than the SDL volume control when the target would have it
natively.
Change-Id: I8e924a2ff1b410f602452d2ea9b691efb82c931e
Ideally someone will go through and make a graphic for the 6G, but as it looks nearly identical to the Video its not a huge deal.
Change-Id: If507c6d4f01eb0b1e5fc2f15f6a0e5a3195006c6
The main reason for this is to be able to downscale the sdl app, which
when used for designing themes for android tends not to fit on laptop
screens these days.
Change-Id: Ib52731dbebcdd03a572be7754c157471165eb2df
1) Change the image with a clean one
2) add keymaps indication
Change-Id: I0d3fff317406809523fb34282df058fe2e074a2c
Reviewed-on: http://gerrit.rockbox.org/173
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
The warnings 1207c7b was supposed to get rid of are sim-only. This
means the binsize argument used for the _FORTIFY_SOURCE fix did not
apply at all. This one actually checks the return values.
Change-Id: Ic4cd8c25de4305310baa868c077a66981cdfcb4b
Yeah, sizeof (void) here with GCC is 1. If something has a problem
with that, we'll set it straight.
Change-Id: I9ad3eee75dd440f6404a04a501d1533c8bc18ba9
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
This dir is suitable for stuff that doesn't fit the target tree, e.g. because
it also builds on hosted or otherwise. It also has a generic subfolder for
fallback C implementations so that not all archs need to provide asm files.
SOURCES should only contain "foo.c" where foo.c includes the specific
<arch>/foo.c files from the subdirs using the preprocessor. This way automatic
selection of asm versions or generic C verion is possible.
For the start, the thread support files are moved, since ASM threads can
be used on hosted platforms as well. Since core_sleep() remains platform
specific it's moved to the corresponding system.h headers.
Change-Id: Iebff272f3407a6eaafeb7656ceb0ae9eca3f7cb9
move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
This unfortunately removes the screendump feature, but usually there are better desktop apps for that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31011 a1c6a512-1295-4272-9138-f99709370657
Now all threads need to ack the connection like on real target, dircache is unloaded and playback stops accordingly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31009 a1c6a512-1295-4272-9138-f99709370657
It doesn't appear recoverable, but instead only spams the commandline.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30482 a1c6a512-1295-4272-9138-f99709370657
* Remove THREAD_ID_CURRENT macro in favor of a thread_self() function, this allows thread functions to be simpler.
* thread_self_entry() shortcut for kernel.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29521 a1c6a512-1295-4272-9138-f99709370657
Make shutdown_hw() not return as it's supposed to, ensure sim_do_exit() is called from main thread and move sim_kernel_shutdown() into it to simplify things.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29455 a1c6a512-1295-4272-9138-f99709370657
Might get remapped to another button later on, for example
if we map the START button to the main menu, then those two
buttons are too close together.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29453 a1c6a512-1295-4272-9138-f99709370657
More information: www.openpandora.org
Possible things to implement:
- Special button mappings
- Battery monitoring
- ALSA audio backend
- Automate creation of "pnd" (=binary) file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29451 a1c6a512-1295-4272-9138-f99709370657
This replaces SDL threads with real cooperative threads, which are less cpu intensive and allow priority scheduling.
The backend for context switching is dependant on the host (sigaltstack/longjmp on Unix, Fibers on Windows).
configure has options to force or disallow SDL threads.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29327 a1c6a512-1295-4272-9138-f99709370657
Do proper shutdown in RaaA builds like writeout of
last.FM scrobbler file and other neat things.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29309 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
Flyspray: FS#11834 (with minor changes by me).
Author: Thomas Jarosch
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28914 a1c6a512-1295-4272-9138-f99709370657
If the SDL timer resolution was higher than 10ms it would have restarted the timer after 1ms, but it made no difference.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28912 a1c6a512-1295-4272-9138-f99709370657
Remove the hardcoded (and way too small) scroll threshold (the distance moved in pixels before we think the users wants to scroll) and replace it with something based on the actual DPI of the screen.
On Android we call the API for that, on other touchscreens we reimplemented Android's formula (as of 2.2) and calculate it.
Flyspray: 11727
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28548 a1c6a512-1295-4272-9138-f99709370657
BUTTON_LEFT is a rockbox define, we must use SDL_BUTTON_LEFT
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27367 a1c6a512-1295-4272-9138-f99709370657
- remove infinite loop after exit()
- make sure picture_surface is initialized, and free it
- split gui_message_loop() in 3 functions and change prototype
- some code is only used in simulator
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27366 a1c6a512-1295-4272-9138-f99709370657
It still works mostly like the simulator. There's also some minor left overs from the sim, but it does not define SIMULATOR.
It installs into the current (build) dir, and you need to run it with '--root .' (because it looks for ./.rockbox and not ./simdisk/rockbox) as options. That's one of the few kludges left that should be resolved soon'ish.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27310 a1c6a512-1295-4272-9138-f99709370657
keypad.
Copyright is restored for each keymap according to git blame.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26615 a1c6a512-1295-4272-9138-f99709370657
since it's now the default thread which is implicitely created by starting the sim.
This caused a segfault that r26283 tried to fix. Revert r26283 and protect
the main thread from being removed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26315 a1c6a512-1295-4272-9138-f99709370657
SDL docs say SDL_PumpEvent (implicitely called by SDL_Poll/WaitEvent)
may only be called from the thread that initializes the video subsystem,
apparently because Windows requires that.
So create an (or bring it back) SDL thread (with preemtive behavior) to read the
event queue for buttons and initialize the video subsystem.
I'd probably would have done that anyway because it enables an interrupt-like method to read them (no polling).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26113 a1c6a512-1295-4272-9138-f99709370657
