5 commits

Author	SHA1	Message	Date
Rafaël Carré	45711ac286	Sansa AMS: centralize clock settings in clock-target.h ... Reorder system_init() to initialize peripherals not only in bootloader Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657	2008-12-04 20:04:31 +00:00
Rafaël Carré	0b6d65b09e	Sansa AMS: Use a valid PLL setting (248MHz aka maximum fclk) ... Fix lcd drivers which stopped working after changing the PLL. Move set_cpu_frequency() to a place where it is actually used. Remove enable_irq() call already done by the bootloader git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657	2008-11-30 16:36:32 +00:00
Dominik Wenger	0b34b77e13	make the m200v2 lcd work again with higher cpu frequency ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18974 a1c6a512-1295-4272-9138-f99709370657	2008-11-02 01:10:29 +00:00
Dominik Wenger	415c46ed54	add sansa m200v2 support to mkamsboot. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18840 a1c6a512-1295-4272-9138-f99709370657	2008-10-19 19:51:42 +00:00
Dave Chapman	08c41d42bb	Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657	2008-10-19 14:11:01 +00:00

Renamed from firmware/target/arm/tcc77x/lcd-ssd1815.c (Browse further)