From c4e8bed5a743f7cdd2e94919ce33b98bceb05317 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Hohensohn?= <hohensoh@rockbox.org>
Date: Sat, 11 Sep 2004 15:18:10 +0000
Subject: [PATCH] some fixes for Ondio USB passthrough (but still doesn't work
 yet)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5067 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/drivers/ata_mmc.c | 21 +++++++++++++--------
 firmware/usb.c             |  9 ++++-----
 2 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/firmware/drivers/ata_mmc.c b/firmware/drivers/ata_mmc.c
index 7ce1547085..a29795789d 100644
--- a/firmware/drivers/ata_mmc.c
+++ b/firmware/drivers/ata_mmc.c
@@ -242,7 +242,17 @@ int ata_soft_reset(void)
 
 void ata_enable(bool on)
 {
-    (void)on;
+    PBCR1 &= ~0x0C00; /* use PB13 as GPIO, if not modified below */
+    if (on)
+    {
+        /* serial setup */
+        PBCR1 |=  0x0800; /* as SCK1 */
+    }
+    else
+    {
+        PBDR |= 0x2000; /* drive PB13 high */
+        PBIOR |= 0x2000; /* output PB13 */
+    }
 }
 
 unsigned short* ata_get_identify(void)
@@ -261,19 +271,14 @@ int ata_init(void)
     /* Port setup */
     PADR |= 0x1600; /* set all the selects high (=inactive) */
     PAIOR |= 0x1600; /* make outputs for them */
-    PAIOR &= ~0x0008; /* input for card detect */
-
-    /* serial setup */
-    PBCR1 &= ~0x0CF0; /* use PB10, PB11, PB13 */
-    PBCR1 |=  0x08A0; /*  as RxD1, TxD1, SCK1 */
 
     if(adc_read(ADC_MMC_SWITCH) < 0x200)
     {   /* MMC inserted */
-        PADR |= 0x0200;
+        PADR &= ~0x1000; /* clear PA12 */
     }
     else
     {   /* no MMC, use internal memory */
-        PADR |= 0x0400;
+        PADR |= 0x1000; /* set PA12 */
     }
 
     sleeping = false;
diff --git a/firmware/usb.c b/firmware/usb.c
index 6b226bd43b..2adf28a52b 100644
--- a/firmware/usb.c
+++ b/firmware/usb.c
@@ -72,11 +72,6 @@ static bool usb_monitor_enabled;
 
 static void usb_enable(bool on)
 {
-#ifdef HAVE_LCD_BITMAP
-    if(read_hw_mask() & USB_ACTIVE_HIGH)
-        on = !on;
-#endif
-    
 #ifdef USB_ENABLE_ONDIOSTYLE
     if(on)
     {
@@ -88,6 +83,10 @@ static void usb_enable(bool on)
     }
     or_b(0x20, &PAIORL); /* output for USB enable */
 #else /* standard HD Jukebox */
+#ifdef HAVE_LCD_BITMAP
+    if(read_hw_mask() & USB_ACTIVE_HIGH)
+        on = !on;
+#endif
     if(on)
     {
         and_b(~0x04, &PADRH); /* enable USB */