From 9392d036c4ee29c251dd1e89cf8ced653972b6fd Mon Sep 17 00:00:00 2001 From: Amaury Pouly Date: Wed, 25 Sep 2013 14:29:00 +0200 Subject: [PATCH] Initial commit for the sony NWZ-E360 and NWZ-E370 Change-Id: I52d21e136a98eaf481615d641795cf7ecf325465 --- apps/SOURCES | 2 + firmware/SOURCES | 17 ++ firmware/export/config.h | 7 + firmware/export/config/sonynwze360.h | 183 +++++++++++++ firmware/export/config/sonynwze370.h | 182 ++++++++++++ firmware/target/arm/imx233/sdmmc-imx233.c | 9 + firmware/target/arm/imx233/sony-nwz/adc-nwz.c | 38 +++ .../target/arm/imx233/sony-nwz/adc-target.h | 31 +++ .../target/arm/imx233/sony-nwz/audio-target.h | 24 ++ .../arm/imx233/sony-nwz/backlight-nwz.c | 61 +++++ .../arm/imx233/sony-nwz/backlight-target.h | 29 ++ .../target/arm/imx233/sony-nwz/button-nwz.c | 64 +++++ .../arm/imx233/sony-nwz/button-target.h | 62 +++++ .../target/arm/imx233/sony-nwz/debug-nwz.c | 28 ++ .../arm/imx233/sony-nwz/fmradio-i2c-nwz.c | 40 +++ .../target/arm/imx233/sony-nwz/lcd-nwze360.c | 259 ++++++++++++++++++ .../target/arm/imx233/sony-nwz/lcd-nwze370.c | 219 +++++++++++++++ .../target/arm/imx233/sony-nwz/lcd-target.h | 24 ++ .../target/arm/imx233/sony-nwz/power-nwz.c | 42 +++ .../arm/imx233/sony-nwz/powermgmt-nwze360.c | 46 ++++ .../arm/imx233/sony-nwz/powermgmt-nwze370.c | 46 ++++ .../arm/imx233/sony-nwz/powermgmt-target.h | 58 ++++ tools/configure | 45 ++- tools/scramble.c | 6 +- 24 files changed, 1519 insertions(+), 3 deletions(-) create mode 100644 firmware/export/config/sonynwze360.h create mode 100644 firmware/export/config/sonynwze370.h create mode 100644 firmware/target/arm/imx233/sony-nwz/adc-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/adc-target.h create mode 100644 firmware/target/arm/imx233/sony-nwz/audio-target.h create mode 100644 firmware/target/arm/imx233/sony-nwz/backlight-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/backlight-target.h create mode 100644 firmware/target/arm/imx233/sony-nwz/button-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/button-target.h create mode 100644 firmware/target/arm/imx233/sony-nwz/debug-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/fmradio-i2c-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/lcd-nwze360.c create mode 100644 firmware/target/arm/imx233/sony-nwz/lcd-nwze370.c create mode 100644 firmware/target/arm/imx233/sony-nwz/lcd-target.h create mode 100644 firmware/target/arm/imx233/sony-nwz/power-nwz.c create mode 100644 firmware/target/arm/imx233/sony-nwz/powermgmt-nwze360.c create mode 100644 firmware/target/arm/imx233/sony-nwz/powermgmt-nwze370.c create mode 100644 firmware/target/arm/imx233/sony-nwz/powermgmt-target.h diff --git a/apps/SOURCES b/apps/SOURCES index b22f597b4a..f050fd1e83 100644 --- a/apps/SOURCES +++ b/apps/SOURCES @@ -289,5 +289,7 @@ keymaps/keymap-sansa-connect.c keymaps/keymap-ypr0.c #elif CONFIG_KEYPAD == MA_PAD keymaps/keymap-ma.c +#elif CONFIG_KEYPAD == SONY_NWZ_PAD +keymaps/keymap-nwz.c #endif diff --git a/firmware/SOURCES b/firmware/SOURCES index f7bd4ed974..86bf746df9 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -1184,6 +1184,23 @@ target/arm/imx233/creative-zenxfi3/adc-zenxfi3.c target/arm/imx233/creative-zenxfi3/powermgmt-zenxfi3.c #endif +#if defined(SONY_NWZE360) || defined(SONY_NWZE370) +target/arm/imx233/button-lradc-imx233.c +target/arm/imx233/sony-nwz/fmradio-i2c-nwz.c +target/arm/imx233/sony-nwz/backlight-nwz.c +target/arm/imx233/sony-nwz/button-nwz.c +target/arm/imx233/sony-nwz/debug-nwz.c +target/arm/imx233/sony-nwz/power-nwz.c +target/arm/imx233/sony-nwz/adc-nwz.c +# if defined(SONY_NWZE360) +target/arm/imx233/sony-nwz/lcd-nwze360.c +target/arm/imx233/sony-nwz/powermgmt-nwze360.c +# elif defined(SONY_NWZE370) +target/arm/imx233/sony-nwz/lcd-nwze370.c +target/arm/imx233/sony-nwz/powermgmt-nwze370.c +# endif +#endif + #ifdef SANSA_CONNECT drivers/lcd-memframe.c target/arm/tms320dm320/sdmmc-dm320.c diff --git a/firmware/export/config.h b/firmware/export/config.h index 7252d62c5e..497325d845 100644 --- a/firmware/export/config.h +++ b/firmware/export/config.h @@ -148,6 +148,7 @@ #define CREATIVE_ZENXFI2_PAD 54 #define CREATIVE_ZENXFI3_PAD 55 #define MA_PAD 56 +#define SONY_NWZ_PAD 57 /* CONFIG_REMOTE_KEYPAD */ #define H100_REMOTE 1 @@ -250,6 +251,8 @@ #define LCD_CREATIVEZXFI2 48 /* as used by the Creative Zen X-Fi2 */ #define LCD_CREATIVEZXFI3 49 /* as used by the Creative Zen X-Fi3 */ #define LCD_ILI9342 50 /* as used by HiFi E.T MA9/MA8 */ +#define LCD_NWZE370 51 /* as used by Sony NWZ-E370 series */ +#define LCD_NWZE360 52 /* as used by Sony NWZ-E360 series */ /* LCD_PIXELFORMAT */ #define HORIZONTAL_PACKING 1 @@ -509,6 +512,10 @@ Lyre prototype 1 */ #include "config/samsungypr0.h" #elif defined(MA9) #include "config/hifietma9.h" +#elif defined(SONY_NWZE370) +#include "config/sonynwze370.h" +#elif defined(SONY_NWZE360) +#include "config/sonynwze360.h" #else /* no known platform */ #endif diff --git a/firmware/export/config/sonynwze360.h b/firmware/export/config/sonynwze360.h new file mode 100644 index 0000000000..d914c1c253 --- /dev/null +++ b/firmware/export/config/sonynwze360.h @@ -0,0 +1,183 @@ +/* + * This config file is for the Sony NWZ-E360 series + */ +#define IMX233_SUBTARGET 3780 +#define IMX233_PACKAGE IMX233_BGA169 + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 89 +#define MODEL_NAME "Sony NWZ-E360 series" + +#define HW_SAMPR_CAPS SAMPR_CAP_ALL + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS SRC_CAP_FMRADIO + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +#ifndef BOOTLOADER +#define HAVE_ALBUMART + +/* define this to enable bitmap scaling */ +#define HAVE_BMP_SCALING + +/* define this to enable JPEG decoding */ +#define HAVE_JPEG + +/* Define this if a programmable hotkey is mapped */ +#define HAVE_HOTKEY + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have a light associated with the buttons */ + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have LCD enable function */ +#define HAVE_LCD_ENABLE + +/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE + should be defined as well. +#define HAVE_LCD_SLEEP +#define HAVE_LCD_SLEEP_SETTING +*/ + +/* define this if you can flip your LCD +#define HAVE_LCD_FLIP +*/ + +/* define this if you can invert the colours on your LCD +#define HAVE_LCD_INVERT +*/ + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_IMX233 + +/* define this if you have a real-time clock with alarm facilities */ +#define HAVE_RTC_ALARM + +#endif /* !BOOTLOADER */ + +/* define this if you have an i.MX23 codec */ +#define HAVE_IMX233_CODEC + +#define CONFIG_TUNER STFM1000 + +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +#define CONFIG_KEYPAD SONY_NWZ_PAD + +/* Define this to enable morse code input */ +#define HAVE_MORSE_INPUT + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* LCD dimensions */ +#define LCD_WIDTH 240 +#define LCD_HEIGHT 320 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 0 +#define MAX_BRIGHTNESS_SETTING 100 +#define DEFAULT_BRIGHTNESS_SETTING 50 + +/* Which backlight fading type? */ +#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define CONFIG_STORAGE STORAGE_MMC + +/* todo */ +#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE + +/* Charging implemented in a target-specific algorithm */ +#define CONFIG_CHARGING CHARGING_TARGET + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/* Define this if you have an IMX233*/ +#define CONFIG_CPU IMX233 + +/* Define this if you want to use the IMX233 i2c interface */ +#define CONFIG_I2C I2C_IMX233 + +/* define current usage levels (based on battery bench) */ +#define CURRENT_NORMAL 35 +#define CURRENT_BACKLIGHT 30 +#define CURRENT_RECORD CURRENT_NORMAL + +/* maximum charging current */ +#define CURRENT_MAX_CHG 200 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 454000000 + +/* Type of LCD */ +#define CONFIG_LCD LCD_NWZE360 + +/* Offset ( in the firmware file's header ) to the file CRC and data. These are + only used when loading the old format rockbox.e200 file */ +#define FIRMWARE_OFFSET_FILE_CRC 0x0 +#define FIRMWARE_OFFSET_FILE_DATA 0x8 + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_ARC + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +//#define USB_HANDLED_BY_OF +#define USE_ROCKBOX_USB +#define USB_VENDOR_ID 0x054c +#define USB_PRODUCT_ID 0x059b +#define HAVE_USB_HID_MOUSE +#define HAVE_BOOTLOADER_USB_MODE + +/* The fuze+ actually interesting partition table does not use 512-byte sector + * (usually 2048 logical sector size) */ +#define MAX_LOG_SECTOR_SIZE 2048 + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define BOOTFILE_EXT "sony" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +#define INCLUDE_TIMEOUT_API + + diff --git a/firmware/export/config/sonynwze370.h b/firmware/export/config/sonynwze370.h new file mode 100644 index 0000000000..45fa289e0d --- /dev/null +++ b/firmware/export/config/sonynwze370.h @@ -0,0 +1,182 @@ +/* + * This config file is for the Sony NWZ-E370 series + */ +#define IMX233_SUBTARGET 3780 +#define IMX233_PACKAGE IMX233_BGA169 + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 88 +#define MODEL_NAME "Sony NWZ-E370 series" + +#define HW_SAMPR_CAPS SAMPR_CAP_ALL + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS SRC_CAP_FMRADIO + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +#ifndef BOOTLOADER +#define HAVE_ALBUMART + +/* define this to enable bitmap scaling */ +#define HAVE_BMP_SCALING + +/* define this to enable JPEG decoding */ +#define HAVE_JPEG + +/* Define this if a programmable hotkey is mapped */ +#define HAVE_HOTKEY + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have a light associated with the buttons */ + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have LCD enable function */ +#define HAVE_LCD_ENABLE + +/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE + should be defined as well. +#define HAVE_LCD_SLEEP +#define HAVE_LCD_SLEEP_SETTING +*/ + +/* define this if you can flip your LCD +#define HAVE_LCD_FLIP +*/ + +/* define this if you can invert the colours on your LCD +#define HAVE_LCD_INVERT +*/ + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_IMX233 + +/* define this if you have a real-time clock with alarm facilities */ +#define HAVE_RTC_ALARM + +#endif /* !BOOTLOADER */ + +/* define this if you have an i.MX23 codec */ +#define HAVE_IMX233_CODEC + +#define CONFIG_TUNER STFM1000 + +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +#define CONFIG_KEYPAD SONY_NWZ_PAD + +/* Define this to enable morse code input */ +#define HAVE_MORSE_INPUT + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 160 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 0 +#define MAX_BRIGHTNESS_SETTING 100 +#define DEFAULT_BRIGHTNESS_SETTING 50 + +/* Which backlight fading type? */ +#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define CONFIG_STORAGE STORAGE_MMC + +/* todo */ +#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE + +/* Charging implemented in a target-specific algorithm */ +#define CONFIG_CHARGING CHARGING_TARGET + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/* Define this if you have an IMX233*/ +#define CONFIG_CPU IMX233 + +/* Define this if you want to use the IMX233 i2c interface */ +#define CONFIG_I2C I2C_IMX233 + +/* define current usage levels (based on battery bench) */ +#define CURRENT_NORMAL 35 +#define CURRENT_BACKLIGHT 30 +#define CURRENT_RECORD CURRENT_NORMAL + +/* maximum charging current */ +#define CURRENT_MAX_CHG 200 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 454000000 + +/* Type of LCD */ +#define CONFIG_LCD LCD_NWZE370 + +/* Offset ( in the firmware file's header ) to the file CRC and data. These are + only used when loading the old format rockbox.e200 file */ +#define FIRMWARE_OFFSET_FILE_CRC 0x0 +#define FIRMWARE_OFFSET_FILE_DATA 0x8 + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_ARC + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +//#define USB_HANDLED_BY_OF +#define USE_ROCKBOX_USB +#define USB_VENDOR_ID 0x054c +#define USB_PRODUCT_ID 0x068a +#define HAVE_USB_HID_MOUSE +#define HAVE_BOOTLOADER_USB_MODE + +/* The fuze+ actually interesting partition table does not use 512-byte sector + * (usually 2048 logical sector size) */ +#define MAX_LOG_SECTOR_SIZE 2048 + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define BOOTFILE_EXT "sony" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +#define INCLUDE_TIMEOUT_API + diff --git a/firmware/target/arm/imx233/sdmmc-imx233.c b/firmware/target/arm/imx233/sdmmc-imx233.c index 708e3c2464..c81220166d 100644 --- a/firmware/target/arm/imx233/sdmmc-imx233.c +++ b/firmware/target/arm/imx233/sdmmc-imx233.c @@ -124,6 +124,15 @@ struct sdmmc_config_t sdmmc_config[] = .ssp = 1, .mode = SD_MODE, }, +#elif defined(SONY_NWZE370) || defined(SONY_NWZE360) + /* The Sony NWZ-E370 uses #B1P29 for power */ + { + .name = "internal/SD", + .flags = POWER_PIN | POWER_INVERTED | WINDOW, + .power_pin = PIN(1, 29), + .ssp = 2, + .mode = MMC_MODE + }, #else #error You need to write the sd/mmc config! #endif diff --git a/firmware/target/arm/imx233/sony-nwz/adc-nwz.c b/firmware/target/arm/imx233/sony-nwz/adc-nwz.c new file mode 100644 index 0000000000..e53005c082 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/adc-nwz.c @@ -0,0 +1,38 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "adc-target.h" +#include "adc-imx233.h" + +int imx233_adc_mapping[] = +{ + [ADC_BATTERY] = IMX233_ADC_BATTERY, + [ADC_DIE_TEMP] = IMX233_ADC_DIE_TEMP, + [ADC_VDDIO] = IMX233_ADC_VDDIO, + [ADC_5V] = IMX233_ADC_VDD5V, +}; + +const char *imx233_adc_channel_name[] = +{ + "Battery(raw)", + "Die temperature(°C)", + "VddIO", + "Vdd5V", +}; diff --git a/firmware/target/arm/imx233/sony-nwz/adc-target.h b/firmware/target/arm/imx233/sony-nwz/adc-target.h new file mode 100644 index 0000000000..e9c1939941 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/adc-target.h @@ -0,0 +1,31 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef _ADC_TARGET_H_ +#define _ADC_TARGET_H_ + +#define NUM_ADC_CHANNELS 4 + +#define ADC_BATTERY 0 +#define ADC_DIE_TEMP 1 +#define ADC_VDDIO 2 +#define ADC_5V 3 + +#endif diff --git a/firmware/target/arm/imx233/sony-nwz/audio-target.h b/firmware/target/arm/imx233/sony-nwz/audio-target.h new file mode 100644 index 0000000000..afa3d9649b --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/audio-target.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef __audio_target__ +#define __audio_target__ + +#endif /* __audio_target__ */ diff --git a/firmware/target/arm/imx233/sony-nwz/backlight-nwz.c b/firmware/target/arm/imx233/sony-nwz/backlight-nwz.c new file mode 100644 index 0000000000..ad3ef484db --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/backlight-nwz.c @@ -0,0 +1,61 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "config.h" +#include "system.h" +#include "lcd.h" +#include "backlight.h" +#include "backlight-target.h" +#include "pwm-imx233.h" +#include "pinctrl-imx233.h" + +void _backlight_set_brightness(int brightness) +{ + imx233_pwm_setup_simple(2, 24000, 100 - brightness); + imx233_pwm_enable(2, true); +} + +bool _backlight_init(void) +{ + imx233_pinctrl_acquire(0, 10, "backlight_enable"); + imx233_pinctrl_set_function(0, 10, PINCTRL_FUNCTION_GPIO); + imx233_pinctrl_enable_gpio(0, 10, true); + imx233_pinctrl_set_gpio(0, 10, true); + _backlight_set_brightness(DEFAULT_BRIGHTNESS_SETTING); + return true; +} + +void _backlight_on(void) +{ +#ifdef HAVE_LCD_ENABLE + lcd_enable(true); /* power on lcd + visible display */ +#endif + /* don't do anything special, the core will set the brightness */ +} + +void _backlight_off(void) +{ + /* there is no real on/off but we can set to 0 brightness */ + _backlight_set_brightness(0); +#ifdef HAVE_LCD_ENABLE + lcd_enable(false); /* power off visible display */ +#endif +} diff --git a/firmware/target/arm/imx233/sony-nwz/backlight-target.h b/firmware/target/arm/imx233/sony-nwz/backlight-target.h new file mode 100644 index 0000000000..78a0a72d85 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/backlight-target.h @@ -0,0 +1,29 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef BACKLIGHT_TARGET_H +#define BACKLIGHT_TARGET_H + +bool _backlight_init(void); +void _backlight_on(void); +void _backlight_off(void); +void _backlight_set_brightness(int brightness); + +#endif /* BACKLIGHT_TARGET_H */ diff --git a/firmware/target/arm/imx233/sony-nwz/button-nwz.c b/firmware/target/arm/imx233/sony-nwz/button-nwz.c new file mode 100644 index 0000000000..93520133e8 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/button-nwz.c @@ -0,0 +1,64 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "button-target.h" +#include "system.h" +#include "system-target.h" +#include "pinctrl-imx233.h" +#include "power-imx233.h" +#include "string.h" +#include "usb.h" +#include "button-lradc-imx233.h" + +struct imx233_button_lradc_mapping_t imx233_button_lradc_mapping[] = +{ +#ifdef SONY_NWZE360 + {195, BUTTON_VOL_DOWN}, + {810, BUTTON_VOL_UP}, +#endif + {1095, BUTTON_BACK}, + {1470, BUTTON_PLAY}, + {1845, BUTTON_RIGHT}, + {2185, BUTTON_LEFT}, + {2525, BUTTON_UP}, + {2870, BUTTON_DOWN}, + {3400, 0}, + {0, IMX233_BUTTON_LRADC_END}, +}; + +void button_init_device(void) +{ + imx233_button_lradc_init(); +} + +#ifdef HAS_BUTTON_HOLD +bool button_hold(void) +{ + return imx233_button_lradc_hold(); +} +#endif + +int button_read_device(void) +{ + int res = 0; + if(BF_RD(POWER_STS, PSWITCH) == 3) + res |= BUTTON_POWER; + return imx233_button_lradc_read(res); +} diff --git a/firmware/target/arm/imx233/sony-nwz/button-target.h b/firmware/target/arm/imx233/sony-nwz/button-target.h new file mode 100644 index 0000000000..94d480f575 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/button-target.h @@ -0,0 +1,62 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef _BUTTON_TARGET_H_ +#define _BUTTON_TARGET_H_ + +#include +#include "config.h" + +void button_init_device(void); +int button_read_device(void); +bool button_debug_screen(void); + +#ifdef SONY_NWZE360 +// Sony NWZ-E360 has hold detect on B0P09, inverted using pullup +#define HAS_BUTTON_HOLD +#define IMX233_BUTTON_LRADC_HOLD_DET BLH_GPIO +#define BLH_GPIO_BANK 0 +#define BLH_GPIO_PIN 9 +#define BLH_GPIO_INVERTED +#define BLH_GPIO_PULLUP +#endif + +#define IMX233_BUTTON_LRADC_CHANNEL 0 + +/* Main unit's buttons */ +#define BUTTON_POWER 0x00000001 +#define BUTTON_BACK 0x00000002 +#define BUTTON_PLAY 0x00000004 +#define BUTTON_LEFT 0x00000008 +#define BUTTON_UP 0x00000010 +#define BUTTON_DOWN 0x00000020 +#define BUTTON_RIGHT 0x00000040 +#ifdef SONY_NWZE360 +#define BUTTON_VOL_DOWN 0x00000080 +#define BUTTON_VOL_UP 0x00000100 +#endif + +#define BUTTON_MAIN 0x3ff + +/* Software power-off */ +#define POWEROFF_BUTTON BUTTON_POWER +#define POWEROFF_COUNT 10 + +#endif /* _BUTTON_TARGET_H_ */ diff --git a/firmware/target/arm/imx233/sony-nwz/debug-nwz.c b/firmware/target/arm/imx233/sony-nwz/debug-nwz.c new file mode 100644 index 0000000000..acb1cfca37 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/debug-nwz.c @@ -0,0 +1,28 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "system.h" +#include "button-target.h" + +bool dbg_hw_target_info(void) +{ + return false; +} diff --git a/firmware/target/arm/imx233/sony-nwz/fmradio-i2c-nwz.c b/firmware/target/arm/imx233/sony-nwz/fmradio-i2c-nwz.c new file mode 100644 index 0000000000..a1377ce1f2 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/fmradio-i2c-nwz.c @@ -0,0 +1,40 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "config.h" +#include "system.h" +#include "fmradio_i2c.h" +#include "pinctrl-imx233.h" +#include "i2c.h" + +void fmradio_i2c_init(void) +{ +} + +int fmradio_i2c_write(unsigned char address, const unsigned char* buf, int count) +{ + return i2c_write(address, buf, count); +} + +int fmradio_i2c_read(unsigned char address, unsigned char* buf, int count) +{ + return i2c_read(address, buf, count); +} diff --git a/firmware/target/arm/imx233/sony-nwz/lcd-nwze360.c b/firmware/target/arm/imx233/sony-nwz/lcd-nwze360.c new file mode 100644 index 0000000000..2a913103c2 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/lcd-nwze360.c @@ -0,0 +1,259 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (c) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include /* off_t */ +#include +#include "cpu.h" +#include "system.h" +#include "backlight-target.h" +#include "lcd.h" +#include "lcdif-imx233.h" +#include "clkctrl-imx233.h" +#include "pinctrl-imx233.h" +#include "logf.h" + +#ifdef HAVE_LCD_ENABLE +static bool lcd_on; +#endif + +static void lcd_write_reg(uint8_t reg, uint8_t data) +{ + imx233_lcdif_wait_ready(); + imx233_lcdif_set_data_swizzle(0); + imx233_lcdif_set_word_length(8); + imx233_lcdif_pio_send(false, 1, ®); + if(reg != 0x22) + imx233_lcdif_pio_send(true, 1, &data); +} + +static void lcd_init_seq(void) +{ + lcd_write_reg(0xea, 0); + lcd_write_reg(0xeb, 0x20); + lcd_write_reg(0xec, 0xc); + lcd_write_reg(0xed, 0xc4); + lcd_write_reg(0xe8, 0x38); + lcd_write_reg(0xe9, 0xe); + lcd_write_reg(0xf1, 1); + lcd_write_reg(0xf2, 8); + lcd_write_reg(0x2e, 0x86); + lcd_write_reg(0x29, 0xff); + lcd_write_reg(0xe4, 1); + lcd_write_reg(0xe5, 0x20); + lcd_write_reg(0xe7, 1); + lcd_write_reg(0x40, 0); + lcd_write_reg(0x41, 0); + lcd_write_reg(0x42, 0); + lcd_write_reg(0x43, 0x14); + lcd_write_reg(0x44, 0x14); + lcd_write_reg(0x45, 0x28); + lcd_write_reg(0x46, 0x11); + lcd_write_reg(0x47, 0x57); + lcd_write_reg(0x48, 5); + lcd_write_reg(0x49, 0x16); + lcd_write_reg(0x4a, 0x19); + lcd_write_reg(0x4b, 0x1a); + lcd_write_reg(0x4c, 0x1a); + lcd_write_reg(0x50, 0x17); + lcd_write_reg(0x51, 0x2b); + lcd_write_reg(0x52, 0x2b); + lcd_write_reg(0x53, 0x3f); + lcd_write_reg(0x54, 0x3f); + lcd_write_reg(0x55, 0x3f); + lcd_write_reg(0x56, 0x28); + lcd_write_reg(0x57, 0x6e); + lcd_write_reg(0x58, 5); + lcd_write_reg(0x59, 5); + lcd_write_reg(0x5a, 6); + lcd_write_reg(0x5b, 9); + lcd_write_reg(0x5c, 0x1a); + lcd_write_reg(0x5d, 0xcc); + lcd_write_reg(0x1b, 0x1b); + lcd_write_reg(0x1A, 1); + lcd_write_reg(0x24, 0x2f); // something special here + lcd_write_reg(0x25, 0x57); // something special here + lcd_write_reg(0x23, 0x8a); + lcd_write_reg(0x2f, 1); + lcd_write_reg(0x60, 0); + lcd_write_reg(0x16, 8); + lcd_write_reg(0x18, 0x36); // something special here + lcd_write_reg(0x19, 1); + udelay(5000); + lcd_write_reg(1, 0); + lcd_write_reg(0x1f, 0x88); + udelay(5000); + lcd_write_reg(0x1f, 0x80); + udelay(5000); + lcd_write_reg(0x1f, 0x90); + udelay(5000); + lcd_write_reg(0x1f, 0xD0); + udelay(5000); + lcd_write_reg(0x17, 6); + lcd_write_reg(0x37, 0); + lcd_write_reg(0x28, 0x38); + udelay(40000); + lcd_write_reg(0x28, 0x3c); +} + +void lcd_init_device(void) +{ + /* the LCD seems to work at 24Mhz, so use the xtal clock with no divider */ + imx233_clkctrl_enable(CLK_PIX, false); + imx233_clkctrl_set_div(CLK_PIX, 1); + imx233_clkctrl_set_bypass(CLK_PIX, true); /* use XTAL */ + imx233_clkctrl_enable(CLK_PIX, true); + imx233_lcdif_init(); + imx233_lcdif_set_lcd_databus_width(8); + imx233_lcdif_set_timings(1, 1, 1, 1); + imx233_lcdif_enable_underflow_recover(true); + imx233_lcdif_setup_system_pins(8); + imx233_lcdif_set_byte_packing_format(0xf); /* two pixels per 32-bit word */ + + // reset device + imx233_lcdif_reset_lcd(true); + mdelay(10); + imx233_lcdif_reset_lcd(false); + mdelay(10); + imx233_lcdif_reset_lcd(true); + mdelay(150); + + lcd_init_seq(); +#ifdef HAVE_LCD_ENABLE + lcd_on = true; +#endif +} + +#ifdef HAVE_LCD_ENABLE +bool lcd_active(void) +{ + return lcd_on; +} + +static void lcd_enable_seq(bool enable) +{ + if(!enable) + { + lcd_write_reg(0x1f, 0xd1); + lcd_write_reg(1, 0x40); + lcd_write_reg(1, 0xc0); + lcd_write_reg(0x19, 1); + } + else + { + lcd_write_reg(0x19, 0x81); + udelay(5000); + lcd_write_reg(1, 0x40); + udelay(20000); + lcd_write_reg(1, 0); + lcd_write_reg(0x1f, 0xd0); + } +} + +void lcd_enable(bool enable) +{ + if(lcd_on == enable) + return; + + lcd_on = enable; + + if(enable) + imx233_lcdif_enable(true); + lcd_enable_seq(enable); + if(!enable) + imx233_lcdif_enable(false); + else + send_event(LCD_EVENT_ACTIVATION, NULL); +} +#endif + +void lcd_update(void) +{ + lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT); +} + +void lcd_update_rect(int x, int y, int w, int h) +{ +#ifdef HAVE_LCD_ENABLE + if(!lcd_on) + return; +#endif + /* make sure the rectangle is included in the screen */ + x = MIN(x, LCD_WIDTH); + y = MIN(y, LCD_HEIGHT); + w = MIN(w, LCD_WIDTH - x); + h = MIN(h, LCD_HEIGHT - y); + + imx233_lcdif_wait_ready(); + lcd_write_reg(2, x >> 8); + lcd_write_reg(3, x & 0xff); + lcd_write_reg(4, (x + w - 1) >> 8); + lcd_write_reg(5, (x + w - 1) & 0xff); + lcd_write_reg(6, y >> 8); + lcd_write_reg(7, y & 0xff); + lcd_write_reg(8, (y + h - 1) >> 8); + lcd_write_reg(9, (y + h - 1) & 0xff); + lcd_write_reg(0x22, 0); + + imx233_lcdif_wait_ready(); + imx233_lcdif_set_word_length(16); + /* there are two cases here: + * - either width = LCD_WIDTH and we can directly memcopy a part of lcd_framebuffer to FRAME + * and send it + * - either width != LCD_WIDTH and we have to build a contiguous copy of the rectangular area + * into FRAME before sending it (which is slower and doesn't use the hardware) + * In all cases, FRAME just acts as a temporary buffer. + * NOTE It's more interesting to do a copy to FRAME in all cases since in system mode + * the clock runs at 24MHz which provides barely 10MB/s bandwidth compared to >100MB/s + * for memcopy operations + */ + if(w == LCD_WIDTH) + { + memcpy((void *)FRAME, FBADDR(x,y), w * h * sizeof(fb_data)); + } + else + { + for(int i = 0; i < h; i++) + memcpy((fb_data *)FRAME + i * w, FBADDR(x,y + i), w * sizeof(fb_data)); + } + /* WARNING The LCDIF has a limitation on the vertical count ! In 16-bit packed mode + * (which we used, ie 16-bit per pixel, 2 pixels per 32-bit words), the v_count + * field must be a multiple of 2. Furthermore, it seems the lcd controller doesn't + * really like when both w and h are even, probably because the writes to the GRAM + * are done on several words and the controller requires dummy writes. + * The workaround is to always make sure that we send a number of pixels which is + * a multiple of 4 so that both the lcdif and the controller are happy. If any + * of w or h is odd, we will send a copy of the first pixels as dummy writes. We will + * send at most 3 bytes. We then send (w * h + 3) / 4 x 4 bytes. + */ + if(w % 2 == 1 || h % 2 == 1) + { + /* copy three pixel after the last one */ + for(int i = 0; i < 3; i++) + *((fb_data *)FRAME + w * h + i) = *((fb_data *)FRAME + i); + /* WARNING we need to update w and h to reflect the pixel count BUT it + * has no relation to w * h (it can even be 2 * prime). Hopefully, w <= 240 and + * h <= 320 so w * h <= 76800 and (w * h + 3) / 4 <= 38400 which fits into + * a 16-bit integer (horizontal count). */ + h = (w * h + 3) / 4; + w = 4; + } + imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, w, h); +} + diff --git a/firmware/target/arm/imx233/sony-nwz/lcd-nwze370.c b/firmware/target/arm/imx233/sony-nwz/lcd-nwze370.c new file mode 100644 index 0000000000..999f4ee525 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/lcd-nwze370.c @@ -0,0 +1,219 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (c) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include /* off_t */ +#include +#include "cpu.h" +#include "system.h" +#include "backlight-target.h" +#include "lcd.h" +#include "lcdif-imx233.h" +#include "clkctrl-imx233.h" +#include "pinctrl-imx233.h" +#include "logf.h" + +#ifdef HAVE_LCD_ENABLE +static bool lcd_on; +#endif + +static void lcd_write_reg(uint8_t reg, void *data, int data_len) +{ + imx233_lcdif_set_data_swizzle(0); + imx233_lcdif_set_word_length(8); + imx233_lcdif_pio_send(false, 1, ®); + imx233_lcdif_pio_send(true, data_len, data); +} + +static void lcd_init_seq(void) +{ + // seems compatible with ILI9163 + lcd_write_reg(1, NULL, 0); // software reset + lcd_write_reg(0x11, NULL, 0); // sleep out + mdelay(150); + /* format: ( )+ */ + static uint8_t init_seq[] = + { + /* cmd sz data... */ + 0x26, 1, 4, /* Gamma Set */ + 0xb1, 2, 9, 0xd, /* Frame Rate */ + 0xc0, 2, 8, 0, /* Power Control 1 */ + 0xc1, 1, 5, /* Power Control 2 */ + 0xc5, 2, 0x31, 0x40, /* VCOM Control 1 */ + 0xc7, 1, 0xc8, /* VCOM Offset Control */ + 0xec, 1, 0xc, /* Unknown */ + 0x3a, 1, 5, /* Interface Pixel Format */ + 0x2a, 4, 0, 0, 0, 0x7f, /* Column Address */ + 0x2b, 4, 0, 0, 0, 0x9f, /* Page Address Set */ + 0x35, 1, 0, /* Tear Effect Line On */ + 0x36, 1, 0xc8, /* Memory access Control */ + 0xb4, 1, 0, /* Display Inversion */ + 0xb7, 1, 0, /* Source Driver Direction Control */ + 0xb8, 1, 0, /* Gate Driver Direction Control */ + 0xf2, 1, 1, /* Gamma Adjustment */ + 0xe0, 15, 0x3f, 0x20, 0x1d, 0x2d, 0x26, 0x0c, 0x4b, 0xb7, + 0x39, 0x17, 0x1d, 0x16, 0x16, 0x10, 0x00, /* Positive Gamma */ + 0xe1, 15, 0x00, 0x1f, 0x21, 0x12, 0x18, 0x13, 0x34, 0x48, + 0x46, 0x08, 0x21, 0x29, 0x28, 0x2f, 0x3f, /* Negative Gamma */ + 0x29, 0, /* Display On */ + }; + + for(unsigned i = 0; i < sizeof(init_seq); ) + { + lcd_write_reg(init_seq[i], &init_seq[i + 2], init_seq[i + 1]); + i += 2 + init_seq[i + 1]; + } +} + +void lcd_init_device(void) +{ + /* the LCD seems to work at 24Mhz, so use the xtal clock with no divider */ + imx233_clkctrl_enable(CLK_PIX, false); + imx233_clkctrl_set_div(CLK_PIX, 1); + imx233_clkctrl_set_bypass(CLK_PIX, true); /* use XTAL */ + imx233_clkctrl_enable(CLK_PIX, true); + imx233_lcdif_init(); + imx233_lcdif_set_lcd_databus_width(8); + imx233_lcdif_set_timings(2, 2, 2, 2); + imx233_lcdif_enable_underflow_recover(true); + imx233_lcdif_setup_system_pins(8); + imx233_lcdif_set_byte_packing_format(0xf); /* two pixels per 32-bit word */ + + // reset device + imx233_lcdif_reset_lcd(true); + mdelay(10); + imx233_lcdif_reset_lcd(false); + mdelay(10); + imx233_lcdif_reset_lcd(true); + mdelay(150); + + lcd_init_seq(); +#ifdef HAVE_LCD_ENABLE + lcd_on = true; +#endif +} + +#ifdef HAVE_LCD_ENABLE +bool lcd_active(void) +{ + return lcd_on; +} + +static void lcd_enable_seq(bool enable) +{ + if(enable) + { + lcd_write_reg(0x11, NULL, 0); + lcd_write_reg(0x29, NULL, 0); + } + else + { + lcd_write_reg(0x28, NULL, 0); + lcd_write_reg(0x10, NULL, 0); + } +} + +void lcd_enable(bool enable) +{ + if(lcd_on == enable) + return; + + lcd_on = enable; + + if(enable) + imx233_lcdif_enable(true); + lcd_enable_seq(enable); + if(!enable) + imx233_lcdif_enable(false); + else + send_event(LCD_EVENT_ACTIVATION, NULL); +} +#endif + +void lcd_update(void) +{ + lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT); +} + +void lcd_update_rect(int x, int y, int w, int h) +{ +#ifdef HAVE_LCD_ENABLE + if(!lcd_on) + return; +#endif + /* make sure the rectangle is included in the screen */ + x = MIN(x, LCD_WIDTH); + y = MIN(y, LCD_HEIGHT); + w = MIN(w, LCD_WIDTH - x); + h = MIN(h, LCD_HEIGHT - y); + + imx233_lcdif_wait_ready(); + uint32_t window = x << 8 | (x + w - 1) << 24; + lcd_write_reg(0x2a, &window, sizeof(window)); + window = y << 8 | (y + h - 1) << 24; + lcd_write_reg(0x2b, &window, sizeof(window)); + lcd_write_reg(0x2c, NULL, 0); + + imx233_lcdif_wait_ready(); + imx233_lcdif_set_data_swizzle(3); + imx233_lcdif_set_word_length(8); + /* there are two cases here: + * - either width = LCD_WIDTH and we can directly memcopy a part of lcd_framebuffer to FRAME + * and send it + * - either width != LCD_WIDTH and we have to build a contiguous copy of the rectangular area + * into FRAME before sending it (which is slower and doesn't use the hardware) + * In all cases, FRAME just acts as a temporary buffer. + * NOTE It's more interesting to do a copy to FRAME in all cases since in system mode + * the clock runs at 24MHz which provides barely 10MB/s bandwidth compared to >100MB/s + * for memcopy operations + */ + if(w == LCD_WIDTH) + { + memcpy((void *)FRAME, FBADDR(x,y), w * h * sizeof(fb_data)); + } + else + { + for(int i = 0; i < h; i++) + memcpy((fb_data *)FRAME + i * w, FBADDR(x,y + i), w * sizeof(fb_data)); + } + /* WARNING The LCDIF has a limitation on the vertical count ! In 16-bit packed mode + * (which we used, ie 16-bit per pixel, 2 pixels per 32-bit words), the v_count + * field must be a multiple of 2. Furthermore, it seems the lcd controller doesn't + * really like when both w and h are even, probably because the writes to the GRAM + * are done on several words and the controller requires dummy writes. + * The workaround is to always make sure that we send a number of pixels which is + * a multiple of 4 so that both the lcdif and the controller are happy. If any + * of w or h is odd, we will send a copy of the first pixels as dummy writes. We will + * send at most 3 bytes. We then send (w * h + 3) / 4 x 4 bytes. + */ + if(w % 2 == 1 || h % 2 == 1) + { + /* copy three pixel after the last one */ + for(int i = 0; i < 3; i++) + *((fb_data *)FRAME + w * h + i) = *((fb_data *)FRAME + i); + /* WARNING we need to update w and h to reflect the pixel count BUT it + * has no relation to w * h (it can even be 2 * prime). Hopefully, w <= 240 and + * h <= 320 so w * h <= 76800 and (w * h + 3) / 4 <= 38400 which fits into + * a 16-bit integer (horizontal count). */ + h = (w * h + 3) / 4; + w = 4; + } + imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, w * 2, h); +} + diff --git a/firmware/target/arm/imx233/sony-nwz/lcd-target.h b/firmware/target/arm/imx233/sony-nwz/lcd-target.h new file mode 100644 index 0000000000..931fcb32a0 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/lcd-target.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (c) 2012 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef LCD_TARGET_H +#define LCD_TARGET_H + +#endif /* LCD_TARGET_H */ diff --git a/firmware/target/arm/imx233/sony-nwz/power-nwz.c b/firmware/target/arm/imx233/sony-nwz/power-nwz.c new file mode 100644 index 0000000000..88644919ad --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/power-nwz.c @@ -0,0 +1,42 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "system.h" +#include "power.h" +#include "tuner.h" +#include "fmradio_i2c.h" +#include "pinctrl-imx233.h" + +static bool tuner_enable = false; + +bool tuner_power(bool enable) +{ + if(enable != tuner_enable) + { + tuner_enable = enable; + } + return tuner_enable; +} + +bool tuner_powered(void) +{ + return tuner_enable; +} diff --git a/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze360.c b/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze360.c new file mode 100644 index 0000000000..fd395e30ca --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze360.c @@ -0,0 +1,46 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include "powermgmt-target.h" + +const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] = +{ + 3659 +}; + +const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] = +{ + 3630 +}; + +/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */ +const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] = +{ + /* Toshiba Gigabeat S Li Ion 700mAH figured from discharge curve */ + { 3659, 3719, 3745, 3761, 3785, 3813, 3856, 3926, 3984, 4040, 4121 }, +}; + +/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */ +const unsigned short percent_to_volt_charge[11] = +{ + /* Toshiba Gigabeat S Li Ion 700mAH figured from charge curve */ + 4028, 4063, 4087, 4111, 4135, 4156, 4173, 4185, 4194, 4202, 4208 +}; diff --git a/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze370.c b/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze370.c new file mode 100644 index 0000000000..fd395e30ca --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/powermgmt-nwze370.c @@ -0,0 +1,46 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include "powermgmt-target.h" + +const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] = +{ + 3659 +}; + +const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] = +{ + 3630 +}; + +/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */ +const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] = +{ + /* Toshiba Gigabeat S Li Ion 700mAH figured from discharge curve */ + { 3659, 3719, 3745, 3761, 3785, 3813, 3856, 3926, 3984, 4040, 4121 }, +}; + +/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */ +const unsigned short percent_to_volt_charge[11] = +{ + /* Toshiba Gigabeat S Li Ion 700mAH figured from charge curve */ + 4028, 4063, 4087, 4111, 4135, 4156, 4173, 4185, 4194, 4202, 4208 +}; diff --git a/firmware/target/arm/imx233/sony-nwz/powermgmt-target.h b/firmware/target/arm/imx233/sony-nwz/powermgmt-target.h new file mode 100644 index 0000000000..268423b433 --- /dev/null +++ b/firmware/target/arm/imx233/sony-nwz/powermgmt-target.h @@ -0,0 +1,58 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2013 by Amaury Pouly + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef POWERMGMT_TARGET_H +#define POWERMGMT_TARGET_H + +#include "config.h" +#include "powermgmt-imx233.h" + +/* Sony NWZ-E360/NWZ-E370 settings: + * - current ramp slope: + * - conditioning threshold voltage: + * - conditioning max voltage: + * - conditioning current: + * - conditioning timeout: + * - charging voltage: + * - charging current: + * - charging threshold current: + * - charging timeout: + * - top off period: + * - high die temperature: + * - low die temperature: + * - safe die temperature current: + * - battery temperature channel: + * - high battery temperature: + * - low battery temperature: + * - safe battery temperature current: + * - low DCDC battery voltage: + */ + +#define IMX233_CHARGE_CURRENT 260 +#define IMX233_STOP_CURRENT 20 +#define IMX233_TOPOFF_TIMEOUT (30 * 60 * HZ) +#define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ) +#define IMX233_DIE_TEMP_HIGH 91 +#define IMX233_DIE_TEMP_LOW 56 +#define IMX233_BATT_TEMP_SENSOR 0 +#define IMX233_BATT_TEMP_HIGH 2400 +#define IMX233_BATT_TEMP_LOW 2300 + +#endif /* POWERMGMT_TARGET_H */ diff --git a/tools/configure b/tools/configure index e3a2e3d37d..4e548eea91 100755 --- a/tools/configure +++ b/tools/configure @@ -1330,8 +1330,9 @@ cat <