diff --git a/manual/advanced_topics/archos-flashing.tex b/manual/advanced_topics/archos-flashing.tex index c6209be2cf..82fe886c69 100644 --- a/manual/advanced_topics/archos-flashing.tex +++ b/manual/advanced_topics/archos-flashing.tex @@ -45,7 +45,7 @@ outside, even if the flash ROM is completely erased. \nopt{ondio}{This won't work if you have one of the rare ``ROMless'' boxes. These have no boot ROM and boot directly from flash. } -If the first $\approx$2KB of the flash ROM are flashed ok, \emph{Minimon} can +If the first $\approx$2~KB of the flash ROM are flashed ok, \emph{Minimon} can be used for the same purpose. \subsection{Terminology and Basic Operation} @@ -101,7 +101,7 @@ backup of the current flash ROM contents, in case you want to restore it later. Select \setting{System $\rightarrow$ Debug (Keep Out!) $\rightarrow$ Dump ROM contents}. You'll notice a few seconds of disk activity. When you connect your \dap\ to the PC afterwards, you'll find two files in the root of your \dap. -Copy the 256KB-sized file named \fname{internal\_rom\_2000000-203FFFF.bin} to +Copy the 256~KB-sized file named \fname{internal\_rom\_2000000-203FFFF.bin} to a safe place. \subsubsection{Flashing} @@ -150,7 +150,7 @@ a safe place. root of your \dap. } -\note{There are no separate flash packages for {\dap}s modified to have 8MB +\note{There are no separate flash packages for {\dap}s modified to have 8~MB of RAM. You need to use the corresponding package for non-modified \playertype. You should then install a Rockbox image that makes use of all available RAM as described in the following section. diff --git a/manual/configure_rockbox/system_options.tex b/manual/configure_rockbox/system_options.tex index 025496efd1..e8dc2310f9 100644 --- a/manual/configure_rockbox/system_options.tex +++ b/manual/configure_rockbox/system_options.tex @@ -15,21 +15,21 @@ \begin{description} \item [Battery Capacity.] This setting can be used to tell Rockbox what capacity (in mAh) the battery being used has. The default is - \opt{player,recorder}{1500mAh}% - \opt{recorderv2fm}{2200mAh}% - \opt{ondiosp,ondiofm,vibe500}{1000mAh}% - \opt{h100,h300}{1300mAh}% - \opt{ipodmini}{400mAh (1G) or 630mAh (2G)}% - \opt{ipodcolor}{700mAh}% - \opt{ipodnano}{300mAh}% - \opt{ipodvideo}{400mAh (30GB) or 600mAh (60/80GB)}% - \opt{ipod4g}{630mAh}% - \opt{ipod3g}{630mAh}% - \opt{ipod1g2g}{1200mAh}% - \opt{m5,x5}{950mAh}% - \opt{gigabeatf}{2000mAh}% - \opt{gigabeats}{700mAh}% - \opt{cowond2}{1600mAh}% + \opt{player,recorder}{1500~mAh}% + \opt{recorderv2fm}{2200~mAh}% + \opt{ondiosp,ondiofm,vibe500}{1000~mAh}% + \opt{h100,h300}{1300~mAh}% + \opt{ipodmini}{400~mAh (1G) or 630~mAh (2G)}% + \opt{ipodcolor}{700~mAh}% + \opt{ipodnano}{300~mAh}% + \opt{ipodvideo}{400~mAh (30~GB) or 600~mAh (60/80~GB)}% + \opt{ipod4g}{630~mAh}% + \opt{ipod3g}{630~mAh}% + \opt{ipod1g2g}{1200~mAh}% + \opt{m5,x5}{950~mAh}% + \opt{gigabeatf}{2000~mAh}% + \opt{gigabeats}{700~mAh}% + \opt{cowond2}{1600~mAh}% , which is the capacity value for the standard \opt{archos}{batteries}\nopt{archos}{battery} shipped with the \dap. Rockbox uses this value for runtime estimation, not battery percentage @@ -39,7 +39,7 @@ \opt{iaudio}{Rockbox does not automatically distinguish between the ``L'' models and the ``simple'' models which determine the default value. If your dap{} is an \opt{m5}{M5L}\opt{x5}{X5L} set the value - to 2250mAh for more accuracy in the runtime estimation.} + to 2250~mAh for more accuracy in the runtime estimation.} \opt{ipod,sansa}{This value is fairly meaningless in the \playerman{} family at present, and work is on-going into finding a better way to determine battery life.} @@ -52,7 +52,7 @@ \opt{h300,ipodnano2g}{ \item [Charge During USB Connection.] This option lets you control whether the \dap{} should charge during the USB connection and hence draw the - full 500mA. Turning it \setting{Off} is recommended if the dap{} is + full 500~mA. Turning it \setting{Off} is recommended if the dap{} is connected through an unpowered USB hub or a laptop port. } diff --git a/manual/getting_started/archos_choice.tex b/manual/getting_started/archos_choice.tex index 96b773d776..690b25a14d 100644 --- a/manual/getting_started/archos_choice.tex +++ b/manual/getting_started/archos_choice.tex @@ -14,7 +14,7 @@ serial number sticker on the back of the unit. \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-studio-small.png} \end{minipage} - & 5GB, 6GB, 10GB, 20GB & + & 5~GB, 6~GB, 10~GB, 20~GB & \begin{minipage}{8cm} Jukebox 5000 \newline Jukebox 6000 \newline @@ -25,7 +25,7 @@ serial number sticker on the back of the unit. \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-recorder-small.png} \end{minipage} - & 6GB, 10GB, 15GB, 20GB & \begin{minipage}{8cm} + & 6~GB, 10~GB, 15~GB, 20~GB & \begin{minipage}{8cm} Jukebox Recorder 6 \newline Jukebox Recorder 10 \newline Jukebox Recorder 15 \newline @@ -35,19 +35,19 @@ serial number sticker on the back of the unit. \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-recorderv2-small.png} \end{minipage} - & 20GB & Jukebox Recorder v2 & recorderv2\\\midrule + & 20~GB & Jukebox Recorder v2 & recorderv2\\\midrule \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-recorderfm-small.png} \end{minipage} - & 20GB & Jukebox Recorder FM & fmrecorder \\\midrule + & 20~GB & Jukebox Recorder FM & fmrecorder \\\midrule \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-ondiosp-small.png} \end{minipage} - & 128MB (flash) & Ondio 128 SP & ondiosp \\\midrule + & 128~MB (flash) & Ondio 128 SP & ondiosp \\\midrule \begin{minipage}{2.2cm} \includegraphics[width=2cm]{getting_started/images/archos-ondiofm-small.png} \end{minipage} - & 128MB (flash) & Ondio 128 FM & ondiofm \\ + & 128~MB (flash) & Ondio 128 FM & ondiofm \\ \end{rbtabular} \note{Rockbox does not run on the Archos Jukebox Multimedia or any Archos products other than those mentioned here.} diff --git a/manual/getting_started/gigabeats_install.tex b/manual/getting_started/gigabeats_install.tex index deb260bfe4..5952c167db 100644 --- a/manual/getting_started/gigabeats_install.tex +++ b/manual/getting_started/gigabeats_install.tex @@ -18,7 +18,7 @@ only possible to connect the \dap{} to a PC in ``MTP mode'', which hides the actual content of your \daps{} disk and provides restricted access to its contents. In reality, the \daps{} hard disk contains two partitions, a small -(150MB) ``firmware partition'' containing the \daps{} firmware (operating +(150~MB) ``firmware partition'' containing the \daps{} firmware (operating system), and a second ``data partition'' containing your media files. The main firmware file in the bootloader partition is called \fname{nk.bin}, and this is the file that is loaded into RAM (by the \daps{} ROM-based diff --git a/manual/getting_started/installation.tex b/manual/getting_started/installation.tex index bc444b3700..02394248e9 100644 --- a/manual/getting_started/installation.tex +++ b/manual/getting_started/installation.tex @@ -59,7 +59,7 @@ follow the instructions at } \opt{cowond2}{ Rockbox runs on all \playerman{} \playertype{} and \playertype{}+ variants - (2 / 4 / 8 / 16GB, with or without DAB/DMB). + (2 / 4 / 8 / 16~GB, with or without DAB/DMB). \note{Newer \playertype{}+ hardware revisions use an updated power management chip, and some functionality is not yet implemented on these players (e.g. touchscreen support).} @@ -317,7 +317,7 @@ filesystem.\\* \opt{ipodvideo} {\note{Autodetection is unable to distinguish between the - \playerman{} 30~GB and 60~GB / 80~GB models and defaults to the + \playerman{} \playertype{} 30~GB and 60/80~GB models and defaults to the 30~GB model. This will usually work but you might want to check the detected value, especially if you experience problems with Rockbox.} } @@ -411,7 +411,7 @@ straight to \reference{ref:finish_install} \subsubsection{Installing the firmware}\label{sec:installing_firmware} \opt{gigabeats}{\note{When your \dap{} is in the Rockbox USB or bootloader -USB mode, you will see two visible partitions - the 150MB firmware +USB mode, you will see two visible partitions - the 150~MB firmware partition (containing at least a file called \fname{nk.bin}) and the main data partition. Rockbox \emph{must} be installed onto the main data partiton.}} @@ -419,9 +419,9 @@ data partiton.}} \begin{enumerate} \item Download your chosen version of Rockbox from the links in the previous section. -\opt{ipodvideo}{\note{There are separate versions of Rockbox for the 30GB and -60GB/80GB models. You must ensure you download the correct version for your -\dap{}.}} +\opt{ipodvideo}{\note{There are separate versions of Rockbox for the 30~GB and +60/80~GB \playerman{} \playertype{} models. You must ensure you download the +correct version for your \dap{}.}} \item Connect your \dap{} to the computer via USB \opt{sansa,sansaAMS,h10,h10_5gb,vibe500}{ in MSC mode } @@ -599,7 +599,7 @@ The new build will be installed over your current build.\\ \opt{gigabeats}{ \note{When your \dap{} is in the Rockbox USB or bootloader - USB mode, you will see two visible partitions, the 150MB firmware + USB mode, you will see two visible partitions, the 150~MB firmware partition (containing at least a file called \fname{nk.bin}) and the main data partition. Rockbox \emph{must} be installed onto the main data partiton.\\} @@ -731,7 +731,7 @@ completely follow the manual uninstallation instructions below.}} your favourite unzipping utility e.g. 7zip. \item Connect your \dap{} to your computer. \item Extract \fname{nk.bin} from within - \fname{gbs\_update\_1\_2\_us.exe} using e.g. 7zip and copy it to the 150 MB + \fname{gbs\_update\_1\_2\_us.exe} using e.g. 7zip and copy it to the 150~MB firmware partition of your \dap{}. \item Safely eject / unmount the USB drive, unplug the cable and restart. \end{itemize} diff --git a/manual/platform/iriverh10.tex b/manual/platform/iriverh10.tex index 8ff17fee28..038003019b 100644 --- a/manual/platform/iriverh10.tex +++ b/manual/platform/iriverh10.tex @@ -9,7 +9,7 @@ \newcommand{\playerman}{Iriver} \newcommand{\playertype}{H10} -\newcommand{\playerlongtype}{\playertype{} 20GB} +\newcommand{\playerlongtype}{\playertype{} 20~GB} \newcommand{\genericimg}{160x128x16} \newcommand{\specimg}{iriverh10} %Used to name the player, e.g. ...to the \dap diff --git a/manual/platform/iriverh10_5gb.tex b/manual/platform/iriverh10_5gb.tex index 77a5a79acf..d6f6c8649a 100644 --- a/manual/platform/iriverh10_5gb.tex +++ b/manual/platform/iriverh10_5gb.tex @@ -9,7 +9,7 @@ \newcommand{\playerman}{Iriver} \newcommand{\playertype}{H10} -\newcommand{\playerlongtype}{\playertype{} 5GB and 6GB} +\newcommand{\playerlongtype}{\playertype{} 5~GB and 6~GB} \newcommand{\genericimg}{128x128x16} \newcommand{\specimg}{iriverh10_5gb} %Used to name the player, e.g. ...to the \dap